• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.595-600
• /
• 1998

Train wheels tend to wear abrasion due to frequent Starlings and brakings. They are important factors of train safety and noise. However, it is difficult and inaccurate to measure their shape and profile manually. Profile measurement system of train wheel with image processing is proposed. The system consists of CCD cameras, PCI image grabber board, and PC operated on Windows '95. Image processing algorithms such as filtering, histogram equalization, and edge detection are presented, and some processing results are illustrated.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.296-301
• /
• 1998

Pentagraphs are used to supply electric power to train via trolley lines. The higher train speed is, the higher voltage and current levels 8u. Since electric power is supplied with slinding contact, localized abrasion is inevitable. It is difficult and dangerous to measure their shape manually. Measurement system of pentagraph slider with ultrasonic processing has been reported. In this paper, measurement system with image processing is proposed. The system consists of CCD cameras, image grabber board, and PC operated on Windows'95. Image processing algorithms are presented and some results are illustrated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.81-87
• /
• 2006

In this paper, an experimental optical head tracker system is designed and constructed. The system is composed of the infrared LEDs and two infrared CCD cameras to filter out the interference of another light in the limited environment like the cockpit. Then the optical head tracker algorithm is designed by using the feature detection algorithm and the 3D motion estimation algorithm. The feature detection algorithm, used to obtain the 2D position coordinates of the features on the image plane, is implemented by using the thresholding and the masking techniques. The 3D motion estimation algorithm which estimates the motion of a pilot's head is implemented by using the extended Kalman filter (EKF). Also, we used the precise rate table to verify the performance of the experimental optical head tracker system and compared the rotational performance of this system with the inertial sensor.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.2
• /
• pp.105-116
• /
• 1996

This study is based upon the thermal modeling, analysis and operational results of KITSAT-1 and KITSAT-2 microsatellites launched on August 11, 1992 and Septermber 26, 1993, respectively. As KITSAT-1/2 was designed to be launched as an auxiliary payload of ARIANE launcher, the constraints on volume, power consumption, and mass were required to adopt passive thermal control method controlling absorptivity, emissivity, and conductivities among adjacent modules. The main of KITSAT was to take Earth images using CCD cameras positioned at the bottom of spacecraft, in which the cameras were always pointing to the center of Earth. This study is concerned with orbital analysis, thermal modeling, simulation results, and its verification by utilizing in-orbit telemetry data of KITSAT-2. The results of telemetry analysis show that the thermal modeling is matched to actual temperature data within 10 degrees of error range in average.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.205-215
• /
• 2011

Films are sensitive to ultraviolet rays and in contrast, digital camera sensors are extremely sensitive to infrared rays due to the differences in spectral characteristics. As a result, all digital cameras that use CCD or CMOS are equipped with IR Cut-Off Filter on the overall sensor. Complete block out of infrared rays is ideal, but the actual experiment results showed that infrared rays were not being blocked out completely. Infrared permeability was also different for each camera. Therefore, this study aims to analyze the effect of the minute quantities of infrared rays, which get transmitted due to mechanical properties of IR Cut-Off Filters that are installed on digital cameras, on digital picture images. The results obtained by carrying out a comparative analysis of a UV Filter (infrared transmitting state) and a UV-IR Filter (infrared blocked out state) are as follows. It was confirmed that the minute quantities of infrared rays do affect dynamic range and resolution to some extent, despite the little or no difference in noise and color reproduction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1100-1102
• /
• 2015

In the study, stereo-based of gamma-ray sources detector for the space including the gamma-ray source to scan in a raster scan method, and obtains a visible light image and the gamma-ray image. We went to retrieve and visualize the distance to source and the direction of the 3-dimension information from Stereo gamma-ray detectors. Configuration of the detector consisted of gamma-ray detecting sensor for gamma-ray Sources, pan-tilt for the scanning of the raster for detecting sources, and CCD camera for visible-light image. Implement a stereo structure of the device to measure the spatial distribution of source, the gamma-ray Detector and CCD camera for the stereo image acquisition was as each configuration 2. The gamma-ray detector and a visible light camera to revision the distribution of detection source, After performing each of the cameras of the stereo correction and shows the distribution of the gamma-ray Sources through 중첩 visible light image and the gamma-ray image. After Rectification process of Left and right image, we were derived visualization results of the stereo image.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.245-249
• /
• 2010

In the stereo vision system, information about an object could be gained by searching through images. Edges which are based on the information about an object are used to find the position of the object and send a message of its position coordinate to a unmanned crain. This thesis proposes an algorithm to find the center point of the object's surface which is connected to the unmanned crain's arm, and to recognize the shape of the object by using two CCD cameras. At first, getting information about the edges, and distinguishing each edge's characteristics depend on user's option, and then find the location information by a set of positions that are proposed. This thesis is expected to be devoted to the development of an automation system of unmanned moving equipment.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.597-604
• /
• 2004

In stereoscopic television, there is a trade-off between visual comfort and 3-dimensional (3D) impact with respect to the baseline-stretch of a 3DTV camera. It is necessary to adjust the baseline-stretch at an appropriate the distance depending on the contents of a scene if we want to obtain a subjectively optimal quality of an image. However, it is very hard to obtain a small baseline-stretch using commercially available cameras of broadcasting quality where the sizes of the lens and CCD module are large. In order to overcome this limitation, we attempt to freely control the baseline-stretch of a stereoscopic camera by synthesizing the virtual views at the desired location of interval between two cameras. This proposed technique is based on the stereo matching and view synthesis techniques. We first obtain a dense disparity map using a hierarchical stereo matching with the edge-adaptive multiple shifted windows. Then, we synthesize the virtual views using the disparity map. Simulation results with various stereoscopic images demonstrate the effectiveness of the proposed technique.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.664-670
• /
• 2007

This study deals with image-based visual servoing for automatic recharging of mobile robot. Because mobile robot must be recharged periodically, it is necessary to detect and move to docking station. Generally, laser scanner is used for detect of position of docking station. CCD Camera is also used for this purpose. In case of using cameras, the position-based visual servoing method is widely used. But position-based visual servoing method requires the accurate calibration and it is hard and complex work. Another method using cameras is image-based visual servoing. Recently, image based visual servoing is widely used for robotic application. But it has a problem that cannot have linear trajectory in the 3-dimensional space. Because of this weak point, image-based visual servoing has a limit for real application. In case of 2-dimensional movement on the plane, it has also similar problem. In order to solve this problem, we point out the main reason of the problem of the resolved rate control method that has been generally used in the image-based visual servoing and we propose an image-based visual servoing method that can reduce the curved trajectory of mobile robot in the cartesian space.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.88-95
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand fur high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The geometrical relationship between PCB, cameras, and xy$\theta$ stage is derived, and analytical equations for alignment errors are also obtained. The unknown parameters including camera declining angles and etc. can be obtained by initialization process. Finally, the proposed algorithm is verified by experiments by using test bench.