• Journal of The Korean Astronomical Society
• /
• v.27 no.2
• /
• pp.119-132
• /
• 1994

The BVR CCD photometry was performed for the globular cluster M13 down to $V=19^m$ over the region from the center to the west 13 arcmin and the CMD of M13 is investigated. The major photometric error in the crowded field which is due to the variation in the sky background was corrected by the median filtering method and the direct sky method. Some characteristics of the CMD of M13 obtained in the present study are as follows: Firstly, the distribution of stars on the CMD is well consistent with the mean lines of Sandage(1970) along the red giant branch(RGB), horizontal branch(HB) and asymtotic giant branch(AGB). Secondly, some gaps exists along the RGB and blue horizontal branch(BHB). Thirdly, the UV-bright stars are more concentrated at the inner region of the cluster.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.930-932
• /
• 2003

For this study we used a CCD video camera to capture the pavement image information via the computer. During investigation processing, the CCD video camera captured 10${\sim}$30 images per second. If the vehicle velocity is too fast, the collected images will be duplicated and if the velocity is too slow there will be a gapped between images. Therefore, in order to control the efficiency of the image grabber we should add accessory tools such as the Differential Global Positioning System (DGPS) and odometer. Furthermore, Kalman Filtering can also solve these problems. After the CCD video camera captured the pavement images, we used the Least-Squares method to eliminate images of gradation which have non-uniform surfaces due to the illumination at night. The Fuzzy Entropy method calculates images of threshold segments and creates binary images. Finally, the Object Labeling algorithm finds objects that are cracks or noises from the binary image based on volume pixels of the object. We used these algorithms and tested them, also providing some discussion and suggestions.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.4
• /
• pp.60-66
• /
• 2005

In this paper, we propose the basic measurement method of a 3D digitizer using a CCD camera in detail. In the localization measurement with a CCD camera, the effect of the background light and the sensitivity consideration are always problems in realizing a high precision. In this research, a new measurement principle is proposed in which the pulse compression technique known in radar is used to eliminate the effect of background light even under a low intensity light source, and the coordinate values on the CCD camera image plane are determined accurately. From the quantitative evaluation of the S/N ratio improvement and the fundamental experiment, it is verified that a substantial improvement in the S/N ratio is realized for both the background noise and the pixel noise and that a resolution of less than the pixel is sufficiently possible.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.28-29
• /
• 2003

각종 렌즈 및 카메라, 망원경, 현미경 등 다양한 광학계들이 설계 및 개발 되고 있는 시점에서 그 성능을 정확하게 평가하는 것이 매우 중요하다. 광학계의 성능 평가를 위해서는 크게 정성적인 방법과 정량적인 방법으로 나눌 수 있는데, 정성적인 방법에 의한 평가는 분해능 표판이나 주기적인 격자의 상을 스크린 등에 결상시킨 후 사람의 눈을 통해서 한계 분해능을 평가하는 방법이다. 정량적인 방법에 의한 평가는 OTF(Optical Transfer Function)를 측정하거나 설계 자료를 통해 계산해 내는 것이다. (중략)

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.201-206
• /
• 2011

With the development and supply of digital displayers, there has been a heightened interest of late in digital photo frames, eclipsing the existing print frames. This digital photo frame was developed into a new LCD digital photo frame that can be used not only for data display but also as a surveillance monitoring equipment when combined with a CCD camera. The developed photo frame uses a one-way communication encryption method that replaces the existing two-way communication encryption method to ensure the security of the surveillance image data. This method uses the chaotic signal's one-way synchronization phenomenon, where synchronization is made for a certain amount of time, after which the synchronized data can be encrypted and decoded at any point. It can yield the same results as the two-way communication encryption method. Moreover, if the proposed method is applied to the close-range communication methods of ubiquitous devices, it will be able to obtain more efficient results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1679-1684
• /
• 2004

This paper introduces a novel approach that can provide the three dimensional information on the movement of a spreader by using two CCD cameras and a laser distance sensor, which enables an ALS (Automatic Landing System) to be used for yard cranes at a harbor. So far a kind of 2D Laser scanner sensor or laser distance measuring units are used as corner detectors for the geometrical matching between the spreader and a container, which provides only 2D information which is not enough for an accurate and fast ALS system required presently. In addition to this deficiency in performance, the price for the system is too high to be adopted widely for the ALS. Therefore, to overcome these defects, a novel method to acquire the three dimensional information for the movement of a spreader including skew and sway angles is proposed using two CCD cameras and a laser distance sensor. To show the efficiency of proposed algorithm, real experiments are performed to show the accuracy improvement in distance measurement by fusing the sensory information of CCD camera and laser distance sensor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.69-77
• /
• 1993

Investigation is given to the detailed procedure of a computer assisted automatic correction for scanning errors of the digital images of close-range photographs scanned by the CCD camera scanner. After determination of the exterior orientation parameters, photo coordinates of the all pixels were calculated using collinearity equation. For the generation of geometric corrected image from the photo coordinates of the all pixels, inverse-weighted-distance average method was used. And the accuracy of the resulting new image was checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.99-108
• /
• 2004

In this paper, a new fast detection and clutter rejection method is proposed for CCD-image-based Automatic Target Detection System. For defence application, fast computation is a critical point, thus we concentrated on the ability to detect various targets with simple computation. In training stage, 1D template set is generated by regional vertical projection and K-means clustering, and binary tree structure is adopted to reduce the number of template matching in test stage. We also use adaptive skip-width by Correlation-based Adaptive Predictive Search(CAPS) to further improve the detecting speed. In clutter rejection stage, we obtain Fourier Descriptor coefficients from boundary information, which are useful to rejected clutters.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.2
• /
• pp.44-52
• /
• 2015

Various approaches have been used in crack preparations and each of the approaches has advantages and disadvantages. Although the routing method has been widely used and seems to be the best approach among the approaches, it is not a complete solution for crack preparation. This paper compares and evaluates a pneumatic crack cleaning device (CCD) developed by Robotics and Intelligent Construction Automation group at Georgia Tech, over existing devices. Surveys were conducted to discover factors that affect the performance of crack/joint preparation work. Then, data for such information were collected via field tests for devices such as router, heat lancer, air blower and CCD. Performed field test results and follow-up interviews demonstrated that the utilization of CCD has potential to offer improvements in productivity, safety, and maintenance cost. An analytic hierarchical procedure (AHP) and economic analyses were conducted. The AHP analysis considered three factors including safety, quality and productivity while the economic analyses examined the alternatives in various ways. The results indicated that the CCD was ranked first and second for the AHP analysis and economic analysis, respectively. In conclusion, the field tests and results revealed that the utilization of CCD achieved satisfactorily in performance, quality, safety and control, and showed that it has high potential in crack cleaning practice.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2050-2056
• /
• 2008

A realization for moving object sensing and tracking system in two dimensional plane using stereo line CCDs and lighting source is presented in this paper. The system is realized that instead of processing camera images directly, two line CCD sensor and input line image is used to measure two dimensional distance by comparing the brightness on line CCDs. The algorithms are used the moving object sensing, path tracking and coordinate converting method. To ensure the effective detection of moving path, a detection algorithm to evaluate the reliability of each measured distance is developed. The realized system results are that the performance of moving object recognizing shows 5mm resolution, and enables to track a moving path of object per looms period.