• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.977-980
• /
• 1998

A real-time holography system using LCD with CCD camera is proposed. In this system, the rainbow hologram is used since it can be reconstructed by white light source. And to record on CCD camera, a kind of in-line holography method is used to widen the width of the fringe pattern. The interference fringe pattern by proposed system is detected with CCD camera and transferred to the LCD A 3-dimensional image is reconstructed when a white light source illuminates the LCD. So it can represent 3 dimensional moving images at real-time. In this paper, to confirm the usefulness of the proposed method, the reconstructed image by holographic film is compared to the same reconstruct image by LCD. In the recording of the interferenced processing, the optimal ratio of the reference and object beam intenstiy is also investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.101-108
• /
• 2004

It is very important to diagnose state of knife and strip cutting face in real time in the side trimming process due to improvement of quality of trimming face. In this study, diagnosis system for knife and strip cutting face was developed. CCD camera was installed at the both side of strip in the entry of burr masher roll. This system offer to operator the diagnosis result that was analyzed image obtained from CCD camera. As a result, bad quality of trimming face is decreased below 1/10 and knife breakage is detected $100\%$.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.248-252
• /
• 2002

Many sensors such as a structured grid pattern generator, a laser, and CCD camera to information have been used, but most of algorithms for a calibration are inefficient memory and experiment data are required. In this paper, the calibration algorithm of a structured grid pattern based on triang is introduced to calculate 3D information in the real world. The beams generated from str pattern generator established horizontally with the CCD camera are projected on the calibn CCD camera observes the intersection plane of a light and an object plane. The 3D infon calculated using observed and calibration data. This proposed method in this paper has advantages such as a memory saving and an experimental data since the 3D information are obtained simply triangulation method.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.139-144
• /
• 2014

As a result of a mismatch of the residual stress between both sides of the silicon wafer, which warps and distorts during the patterning process. The accuracy of the warpage measurement is related to the calibration. A CCD camera was used for the calibration. Performing optimization of the error function constructed with phase values measured at each pixel on the CCD camera, the coordinates of each light source can be precisely determined. Measurement results after calibration was performed to determine the warpage of the silicon wafer demonstrate that the maximum discrepancy is $5.6{\mu}m$ with a standard deviation of $1.5{\mu}m$ in comparison with the test results obtained by using a Form TalySurf instrument.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.353-355
• /
• 1994

This work describes a hardware implementation of a precision image tracking system which employs a CCD camera mounted on pan/tilt device. Unknown translation between two successive images of a moving object is estimated by using a generalized least-squares method. Estimated position error obtained by the tracking algorithm is used to drive DC motors built in the pan/tilt device for the camera to follow the image. An experimental result shows a sub-resolution tracking error for a image moving with a uniform velocity.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.930-932
• /
• 2003

For this study we used a CCD video camera to capture the pavement image information via the computer. During investigation processing, the CCD video camera captured 10${\sim}$30 images per second. If the vehicle velocity is too fast, the collected images will be duplicated and if the velocity is too slow there will be a gapped between images. Therefore, in order to control the efficiency of the image grabber we should add accessory tools such as the Differential Global Positioning System (DGPS) and odometer. Furthermore, Kalman Filtering can also solve these problems. After the CCD video camera captured the pavement images, we used the Least-Squares method to eliminate images of gradation which have non-uniform surfaces due to the illumination at night. The Fuzzy Entropy method calculates images of threshold segments and creates binary images. Finally, the Object Labeling algorithm finds objects that are cracks or noises from the binary image based on volume pixels of the object. We used these algorithms and tested them, also providing some discussion and suggestions.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.60-66
• /
• 2005

In this paper, we propose the basic measurement method of a 3D digitizer using a CCD camera in detail. In the localization measurement with a CCD camera, the effect of the background light and the sensitivity consideration are always problems in realizing a high precision. In this research, a new measurement principle is proposed in which the pulse compression technique known in radar is used to eliminate the effect of background light even under a low intensity light source, and the coordinate values on the CCD camera image plane are determined accurately. From the quantitative evaluation of the S/N ratio improvement and the fundamental experiment, it is verified that a substantial improvement in the S/N ratio is realized for both the background noise and the pixel noise and that a resolution of less than the pixel is sufficiently possible.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.793-799
• /
• 2018

CCD카메라는 방사선에 쉽게 열화되어 고방사선구역에서는 촬상관을 이용한 일체화된 카메라가 사용되고 있다. 이를 방사선에 강한 전자부품을 사용한 카메라헤드부와 방사선에 약한 TR, IC등을 사용한 원격제어부로 분리제작한 내 방사선 카메라시스템을 구현하였다. 실험결과 전자부품 중 가장 먼저 손상된 것은 수평 및 수직 동기 발생 IC이었으며 $2{\times}10^5{\sim}10^6rad$의 방사선이 누적되면 정상적인 기능이 상실됨을 확인하였다. 또한 원격화를 위한 신호전송 케이블은 입출력 버퍼회로를 부가하고 쉴드와 케이블의 폐루프면적을 감소시켜 신호 손실보정 및 노이즈를 제거하였다. 따라서 전체의 시스템을 교체하는 것이 아니라 카메라 헤드부분만을 교체하여 사용할 수 있으므로 실용적이며 관리 유지비용이 많이 절감 될 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.887-888
• /
• 2012

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.433-435
• /
• 2005

광변환 물질을 사용하여 X-선이나 감마방사선을 가시광으로 변환한 다음 CCD 카메라를 통하여 광량을 측정하면 방사선의 양을 간접적으로 측정할 수 있다. 본 연구에서는 CCD형 비상대용 로봇용 고속 삼차원 방사선 위치 탐지장치에서 방사선 위치 센싱의 핵심 역할을 수행하는 CCD 방사선 탐지부를 간접 방사선 측정 방법을 응용하여 고안하고 구현한 다음 이에 대한 방사선 특성시험을 수행하였다. 시험 결과로 부터 구현한 CCD형 방사선 센서가 방사선 위치 및 선량 탐지장치로 활용 가능성이 충분함 확인하였다.