• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1100-1102
• /
• 2015

In the study, stereo-based of gamma-ray sources detector for the space including the gamma-ray source to scan in a raster scan method, and obtains a visible light image and the gamma-ray image. We went to retrieve and visualize the distance to source and the direction of the 3-dimension information from Stereo gamma-ray detectors. Configuration of the detector consisted of gamma-ray detecting sensor for gamma-ray Sources, pan-tilt for the scanning of the raster for detecting sources, and CCD camera for visible-light image. Implement a stereo structure of the device to measure the spatial distribution of source, the gamma-ray Detector and CCD camera for the stereo image acquisition was as each configuration 2. The gamma-ray detector and a visible light camera to revision the distribution of detection source, After performing each of the cameras of the stereo correction and shows the distribution of the gamma-ray Sources through 중첩 visible light image and the gamma-ray image. After Rectification process of Left and right image, we were derived visualization results of the stereo image.

• 대한치과보철학회:학술대회논문집
• /
• 1997.11a
• /
• pp.49-49
• /
• 1997

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.351.2-351
• /
• 2001

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.289-290
• /
• 2006

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1157-1163
• /
• 2000

In this paper, we present a novel and practical stereo vision system that uses only one camera and four mirrors placed in front of the camera. The equivalent of a stereo pair of images are formed as left and right halves of a single CCD image by using four mirrors placed in front of the ten of a CCD camera. An object arbitrary point in 3D space is transformed into two virtual points by the four mirrors. As in the conventional stereo system, the displacement between the two conjugate image points of the two virtual points is directly related to the depth of the object point. This system has the following advantages over traditional two camera stereo that identical system parameters, easy calibration and easy acquisition of stereo data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.205-210
• /
• 2008

In previous paper, we introduced 3d acquisition system with CCD cameras, but it was not distinguished from other 3d acquisition system with PSD camera. In this paper, we introduce the 3d data acquisition system using by stereo method with two cameras, show the calibration method of two cameras, and present 3d acquisition methods. we tried to improve the accuracy of 3d data acquisition and implemented the proposed methods. According to the result, we found that the proposed algorithms can boost the accuracy highly against the previous works. The proposed methods are to remove distortion on input images and adjust z axis. We describes the performance in the result.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.1 s.16
• /
• pp.13-21
• /
• 2005

Experiments on settling behaviour of fine-grained particles without destroying the large fragile aggregates were carried out in still water with a CCD (Charged Coupled Device)-Camera. The experiments dealt with the measuring of the vertical concentration profile of cohesive particles with a CCD-Camera and the physico-chemical influences (NaCl, density, temperature and pH value) on the vertical distribution of the concentration. The vertical concentration profile of fine suspended particles (alumina and quartz) was possible up to $20,000\;mg/{\ell}$ with a CCD-Camera. The vertical concentration profile of cohesive sediments was on the decrease because of the increasing initial concentration, temperature and salinity. The vertical concentration profile of alumina was on the decrease quicker than quartz with increasing salinity. Furthermore, the pH value affects the settling behaviour of alumina. At a PH value of 4.2 the settling rate of the particles was very low and on the increase until pH 8.9 because of the aggregation behaviour of particles. From the PH value of 9 the average settling velocity was on the decrease.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.48-55
• /
• 1999

This paper describes automatic gain control circuit (AGC) design techniques for CMOS CCD camera interface systems. The required gain of the AGC in the proposed system is controlled directly by digital bits without conventional extra D/A converters and the signal settling behavior is almost independent of AGC gain variation at video speeds. A capacitor-segment combination technique to obtain large capacitance values considerably improves the effective bandwidth of the AGC based on switched-capacitor techniques. A proposed layout scheme for capacitor implementation shows AGC matching accuracy better than 0.1 %. The outputs from the AGC are transferred to a 10b A/D converter integrated on the same chip. The proposed AGC is implemented as a sub-block of a CCD camera interface system using a 0.5 um n-well CMOS process. The prototype shows the 32-dB AGC dynamic range in 1/8-dB steps with 173 mW at 3 V and 25 MHz.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.30-37
• /
• 2007

Hardware for monitoring the water quality is developed using water fleas. Water flea is a frequently used biological sensor for monitoring the water quality. Water fleas quickly respond to the incoming toxic water by changing their activity when they are exposed. By measuring the activity of water fleas, the incoming toxic water is instantly detected in real time. So far the measurement of activity of water fleas has been done with a system equipped with a light source of LED and a light detector of photo transistor. Water flea itself is, however, sensitive to light resulting in incorrect response and the system has two inconvenient separate parts of the light source and the detector. This paper suggests a system using a CCD camera instead of a light source and a detector. The suggested system processes the image data from the CCD camera in real time without any delay. The developed system becomes a part of the remote water monitoring embedded system.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.410-416
• /
• 2010

This paper presents the auto-extraction method that searches for the Mapping points in the calibration algorithm of the image acquired by the wide angle CCD camera. In this algorithm, we remove the noise from the distorted image and then obtain the edge image. Proposed method extracts the distortion point, comparing the threshold value of the histogram of the horizontal and vertical pixel lines in edge image. This processing step can be directly applied to the original image of the wide angle CCD camera output. Proposed method results are compared with hand-worked result image using the two wide angle CCD cameras having different angles with the difference value of the result images respectively. Experimental results show that proposed method can allocate the distortion-calibration constant of the wide angle CCD camera regardless of lens type, distortion shape and image type.