• 화훼연구
• /
• 제16권4호
• /
• pp.234-238
• /
• 2008

본 연구는 수출용 접목선인장의 연중 출하물량을 조절하는데 도움이 되기 위한 목적으로 생장억제제인 CCC와 diniconazole을 처리하여 접목선인장의 생육을 단기간 억제하는 방법을 알기 위하여 수행하였다. 비모란선인장에 diniconazole을 처리하여 구경을 조사한 결과 약 1.1mm 정도 구경이 감소하였으며 자구수는 무처리의 경우 7.2개였으나 $100\;mg{\cdot}L^{-1}$ 처리에서 6.4개로 자구수 감소에 유의성이 있었다. 산취선인장의 CCC 처리 30일 후의 생육특성을 조사한 결과 모든 처리구에서 구경, 구고, 자구수 등에 억제 효과가 있었으며 특히 $150\;mg{\cdot}L^{-1}$ 처리의 경우 무처리 보다 구경이 3.3 mm, 구고가 13.4 mm 감소하였다. 따라서 산취선인장 정식 후 재배과정에서 출하시기를 조절할 목적으로 생장억제제를 시용할 경우 $150\;mg{\cdot}L^{-1}$ CCC 처리가 가장 효과적이었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.173-173
• /
• 2017

Phalaenopsis orchid is one of the most important flowers in flower industry. We conducted an experiment to find out the response of different concentration of chlorocholine chloride (CCC) for the in vitro regeneration of protocorm like bodies (PLBs) of Phalaenopsis 'Fmk02010'. We used five different concentrations of CCC and these were 0 (control), 0.01, 0.1, 1 and $10mgL^{-1}$ in modified MS medium and cultured for 42 days. We added two major salts ammonium nitrate ($412.5mgL^{-1}$) and potassium nitrate ($950.0mgL^{-1}$) to the MS medium for the modification. Maximum numbers of PLBs were found from media with $0.01mgL^{-1}$ of CCC (15.667) and maximum fresh weight (0.211 g) as well. The 100% PLB formation rate was also found from $0.01mgL^{-1}$ of CCC. We found 58.83% variation in number of PLBs ($R^2=0.5883$) and 47.44% variation in fresh weight ($R^2=0.4744$) to the different CCC concentrations. Our study suggested that increase in the CCC concentration negatively affect the PLBs organogenesis of Phalaenopsis. We can suggest that the addition of very low concentration of CCC in plant culture medium can increase the number, formation rate and fresh weight of PLBs of Phalaenopsis.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.177-177
• /
• 2017

Phalaenopsis orchid is one of the most important flowers in flower industry. We conducted an experiment to find out the response of different concentration of chlorocholine chloride (CCC) for the in vitro regeneration of protocorm like bodies (PLBs) of Phalaenopsis 'Fmk02010'. We used five different concentrations of CCC and these were 0 (control), 0.01, 0.1, 1 and $10mgL^{-1}$ in modified MS medium and cultured for 42 days. We added two major salts ammonium nitrate ($412.5mgL^{-1}$) and potassium nitrate ($950.0mgL^{-1}$) to the MS medium for the modification. Maximum numbers of PLBs were found from media with $0.01mgL^{-1}$ of CCC (15.667) and maximum fresh weight (0.211 g) as well. The 100% PLB formation rate was also found from $0.01mgL^{-1}$ of CCC. We found 58.83% variation in number of PLBs ($R^2=0.5883$) and 47.44% variation in fresh weight ($R^2=0.4744$) to the different CCC concentrations. Our study suggested that increase in the CCC concentration negatively affect the PLBs organogenesis of Phalaenopsis. We can suggest that the addition of very low concentration of CCC in plant culture medium can increase the number, formation rate and fresh weight of PLBs of Phalaenopsis.

• Industrial Engineering and Management Systems
• /
• 제7권2호
• /
• pp.101-112
• /
• 2008

As charts to monitor the process fraction defectives, P, in the high-yield processes, Mishima et al. (2002) discussed a synthetic chart, the Synthetic CS chart, which integrates the CS (Confirmation Sample)$_{CCC(\text{Cumulative Count of Conforming})-r}$ chart and the CCC-r chart. The Synthetic CS chart is designed to monitor quality characteristics in real-time. Recently, Kotani et al. (2005) presented the EWMA (Exponentially Weighted Moving-Average)$_{CCC-r}$ chart, which considers combining the quality characteristics monitored in the past with one monitored in real-time. In this paper, we present an alternative chart that is more superior to the $EWMA_{CCC-r}$ chart. It is an integration of the $EWMA_{CCC-r}$ chart and the CCC-r chart. In using the proposed chart, the quality characteristic is initially judged as either the in-control state or the out-of-control state, using the lower and upper control limits of the $EWMA_{CCC-r}$ chart. If the process is not judged as the in-control state by the $EWMA_{CCC-r}$ chart, the process is successively judged, using the $EWMA_{CCC-r}$ chart. We compare the ANOS (Average Number of Observations to Signal) of the proposed chart with those of the $EWMA_{CCC-r}$ chart and the Synthetic CS chart. From the numerical experiments, with the small size of inspection items, the proposed chart is the most sensitive to detect especially the small shifts in P among other charts.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.140-146
• /
• 1996

A large portion(above 70%) fo the hydrocorbon and NOx emissions for a typical vehicle occur mainly before the conventional underbody catalyst reaches activation temperature. To meet the stringent regulation as EC stage 2, the emissions produced during this period must be reduced. One of alternative techniques is to place CCC(Close-Coupled Catalyst) near the exhaust manifold. In this study, the characteristics of CCC are observed through EEC mode.

• 응용통계연구
• /
• 제31권4호
• /
• pp.485-495
• /
• 2018

CCC-r 관리도는 고품질공정에서 공정불량률을 관리하는 경우 매우 효율적이라고 알려져 있다. 이 관리도를 사용할 때 관리상태의 공정모수는 일반적으로 알려져 있지 않기 때문에 제1국면의 표본을 추출하여 이를 추정해야 한다. 제2국면에서 관리도의 성능은 제1국면에서 추정한 모수와 관리한계에 영향을 받기 때문에, 추정 오차의 영향을 살펴보는 것은 중요하다. 이 논문에서는 일반적으로 많이 사용하는 평균런길이의 평균(average of average run length) 이외에 평균런길이의 표준편차(standard deviation of average run length)를 사용하여 CCC-r 관리도의 관리상태의 성능을 평가하였다. 그 결과 CCC-r 관리도에서 안정적인 관리상태의 성능을 유지하기 위해서는 이전에 권장하던 제1국면의 표본 크기보다 훨씬 더 큰 표본이 필요하다는 사실을 알 수 있었다.

• Industrial Engineering and Management Systems
• /
• 제4권1호
• /
• pp.75-81
• /
• 2005

Borror et al. discussed the EWMA(Exponentially Weighted Moving Average) chart to monitor the count of defects which follows the Poisson distribution, referred to the $EWMA_c$ chart, as an alternative Shewhart c chart. In the $EWMA_c$ chart, the Markov chain approach is used to calculate the ARL (Average Run Length). On the other hand, in order to monitor the process fraction defectives P in high-yield processes, Xie et al. presented the CCC(Cumulative Count of Conforming)-r chart of which quality characteristic is the cumulative count of conforming item inspected until observing $r({\geq}2)$ nonconforming items. Furthermore, Ohta and Kusukawa presented the $CS(Confirmation Sample)_{CCC-r}$ chart as an alternative of the CCC-r chart. As a more superior chart in high-yield processes, in this paper we present an $EWMA_{CCC-r}$ chart to detect more sensitively small or moderate shifts in P than the $CS_{CCC-r}$ chart. The proposed $EWMA_{CCC-r}$ chart can be constructed by applying the designing method of the $EWMA_C$ chart to the CCC-r chart. ANOS(Average Number of Observations to Signal) of the proposed chart is compared with that of the $CS_{CCC-r}$ chart through computer simulation. It is demonstrated from numerical examples that the performance of proposed chart is more superior to the $CS_{CCC-r}$ chart.

• 정보통신설비학회논문지
• /
• 제9권4호
• /
• pp.158-163
• /
• 2010

KT will deploy HSPA+/CCC network in this year to handle data explosion. CCC is an evolutionary wireless network architecture which divides a node B into baseband and radio part. By collecting baseband units in a digital unit central station and installing only remote units on desired sites, the operator can reduce the total cost of ownership and $CO_2$ emission. In this paper, we describe some expected problems in deploying HSPA+/CCC network, and how to implement the wireless network planning system to solve them effectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.844-847
• /
• 1996

This paper describes the servo position control for the 2-axis positioning table the servo controller consists of conventional feedback loops, disturbance observer. To reduce the contour error, which occurs in the multi-dimensions machines, cross-coupled controller(CCC) is suggested. A weak point of the CCC is their low effectiveness in dealing with arbitrary nonlinear contour such as circles and parabolas. This paper introduces a new nonlinear CCC that is based on control gains that vary during the contour movement The gains of CCC and adjusted in real time according to the shape of nonlinear contour. The feedback controller based on the disturbance observer compensated for external disturbance, plant uncertainty and bad effectiveness by friction model. Suggested servo controller which improve the contouring accuracy, apply to the 2-axis system. Simulation results on 2-axis table verify the effectiveness of the proposed servo controller.

• 한국잠사곤충학회지
• /
• 제22권1호
• /
• pp.46-51
• /
• 1980

CCC의 엽면살포가 상수의 생장 및 생체내 대사에 미치는 영향을 분석 검토하여 얻어진 결과를 요약하면 다음과 같다. 1. 상엽의 생건중, 엽면적, 지조장, 지조중은 감소되었으나 지조경장은 약간 증대되었다. 2. 상엽의 엽록소 함량 증대에 효과가 있었다. 3. 상엽의 GOT, GDP 활성에 영향을 주지 않았다. 4. 상엽내 분해능의 활성은 낮았으나 합성능의 활성은 높았다.