• 대한전자공학회논문지SD
• /
• 제42권5호
• /
• pp.47-54
• /
• 2005

본 논문에서는 Crosstalk에 의한 coupling capacitance의 변화량, ${\Delta}Cc$이 기본값인 Cc보다 더 커질 수 있음을 제안한 테스트 회로를 이용하여 실험적으로 증명하였다. 또한 ${\Delta}Cc$가 Aggressive line의 위상에 매우 의존함을 보였으며 위상이 같은 경우보다 반대인 경우에 ${\Delta}Cc$가 크게 됨을 보였다. 실험 결과의 타당성을 검증을 위해 HSPICE 시뮬레이션을 수행하여 실험치와 잘 맞음을 나타내었다.

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.833-838
• /
• 2011

제조 산업현장에서 RFID 시스템은 제조 물품의 데이터를 수집, 분류 그리고 처리를 위하여 사용되어진다. 큰 공장에서 RFID시스템을 설치하려면 RS232통신을 위한 많은 양의 유선 데이터 통신망이 필요하다. 만약 공장에서 RFID 시스템의 설치장소가 변경이 되거나 혹은 증설되는 경우 이미 설치된 유선 데이터 망은 다시 재 설치되어야 한다. 이러한 재설치를 위해서 많은 시간적 그리고 금전적인 재투자가 필요하다. 그러나 무선 데이터 통신망을 이용하면 초기 설치 혹은 재설치가 매우 간단하다. 본 논문에서는 무선통신시스템과 RFID 시스템을 구현하였다. 무선통신시스템을 위해서 CC1020칩을 사용하였고 RFID 시스템을 위해서 EM4095칩을 사용하였다. CC1020칩은 고 신뢰 데이터 통신이 가능하며 간단한 상태 레지스터를 설정함으로서 송신과 수신 상태전환 그리고 400 MHz 혹은 900 MHz의 원하는 주파수를 선택할 수 있다. 또한 통신거리는 외장안테나를 사용하면 약 50m이다. RFID 시스템을 위한 EM4095는 125 KHz 반송주파수를 사용하며 적은 수의 부품을 연결함으로써 리더 시스템을 구현할 수 있다. 그리고 Tag은 읽기 전용인 EM4100을 사용되어졌다. 무선통신 시스템과 RFID 시스템을 제어하기 위해 Atmega128을 사용되어졌다. 구현된 시스템으로 Tag의 데이터가 50 m 거리에서는 에러 없이 통신이 되는 것을 확인하였다. 논문에서 CC1020을 위한 회로도와 동작 프로그램, 그리고 RFID 시스템의 회로도와 동작 프로그램을 보였다. 그리고 실험에 사용된 시스템을 사진으로 보이고, CC1020의 데이터 동작 파형을 그림으로 보였으며. 각 전송방법에 대한 성능을 보였다.

• Archives of Pharmacal Research
• /
• 제25권1호
• /
• pp.11-24
• /
• 2002

The antitumor antibiotic (+)-CC-1065 can alkylate N3 of guanine in certain sequences. A previous high-field $^1H$ NMR study on the$(+)-CC-1065d[GCGCAATTG*CGC]_2$ adduct ($^*$ indicates the drug alkylation site) showed that drag modification on N3 of guanine results in protonation of the cross-strand cytosine [Park, H-J.; Hurley, L. H. J. Am. Chem. Soc.1997, 119,629]. In this contribution we describe a further analysis of the NMR data sets together with restrained molecular dynamics. This study provides not only a solution structure of the (+)-CC-1065(N3- guanine) DNA duplex adduct but also new insight into the molecular basis for the sequence- specific interaction between (+)-CC-1065 and N3-guanine in the DNA duplex. On the basis of NOESY data, we propose that the narrow minor groove at the 7T8T step and conformational kinks at the junctions of 16C17A and 18A19T are both related to DNA bending in the drugDNA adduct. Analysis of the one-dimensional $^1H$ NMR (in $H_2O$) data and rMD trajectories strongly suggests that hydrogen bonding linkages between the 8-OH group of the (+)-CC-1065 A-sub-unit and the 9G10C phosphate via a water molecule are present. All the phenomena observed here in the (+)-CC-1065(N3-guanine) adduct at 5'$-AATTG^*$are reminiscent of those obtained from the studies on the (+)-CC-1065(N3-adenine) adduct at $5'-AGTTA^*$, suggesting that (+)-CC-1065 takes advantage of the conformational flexibility of the 5'-TPu step to entrap the bent structure required for the covalent bonding reaction. This study reveals a common molecular basis for (+)-CC-1065 alkylation at both $5'-TTG^*$ and $5'-TTA^*$, which involves a trapping out of sequence-dependent DNA conformational flexibility as well as sequence-dependent general acid and general base catalysis by duplex DNA.

• 융합신호처리학회논문지
• /
• 제8권1호
• /
• pp.58-62
• /
• 2007

디지털 통신은 통신시스템의 구현과 모바일 화를 위해 필요하다. 모바일 화를 위한 무선 데이터 송신 그리고 수신은 이동 중 언제든지 그리고 어디 곳이든지 가능해야 한다. 모바일 통신 시스템은 소형화, 경량화 그리고 적은 소비전력으로 운영이 되어야 한다. 이러한 기술은 유비쿼터스 시대에서 모바일용 통신기기의 필수이다. 모바일 통신의 적용에서 요구되는 사항들은 다음과 같다. 첫째, 간단한 명령으로 데이터를 주고받을 수 있어야 한다. 둘째로 저 전력으로 구동되는 핸디 헬드형으로 구현되어야 한다. 셋째로 데이터 통신에 신뢰성이 있어야 한다. 이 기본적인 요구조건으로 구현된 시스템의 활용분야은 매우 다양해진다. 최근 각광 받고 있는 Car to Car 시스템에서 적용이 그 한 예이다. 이 시스템은 도로의 모든 상황을 자동차끼리 연결하여 전달해 주며 이로 인해 일어 날수 있는 여러 사고들은 막아 준다. 이러한 시스템을 신뢰성있게 구현하기 위해서는 기본적으로 디지털 데이터 통신이 필요하다. 본 논문에서는 디지털 데이터 통신을 위해서 CC1020 칩을 사용하여 통신 모뎀을 구현하였다. 이 침의 사용으로 주파수의 선택이 간결하게 되었고, 송신에서 수신 상태로 변환도 간단히 레지스터의 설정으로 가능하였다. 송신 출력도 10dBm로 통신 거리는 약 100m이다. 또한 칩의 전원이 3v의 저 전력을 사용하고, 간단한 레지스트 설정으로 송신 및 수신 상태에서 쉽게 sleeping mode 상태로 전환할 수 있었다. 결론으로 CC1020칩의 프로그램 알고리즘, MCU(Atmega128)과의 연결 회로도를 보였다. MCU와 CC1020의 연결 핀에서 중요한 파형을 그림으로 보였다. 그리고 실험에 사용된 송신부 및 수신부를 사진으로 보였으며, 이것을 이용하여 통신 수신율을 분석하였다.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.123-136
• /
• 2013

Objectives: This paper was prepapred to report airborne asbestos fiber concentrations in asbestos textile, brake-lining, commutator, and building materials manufacturing industries, and some other asbestos related industries in Korea from 1994 to 2006. Methods: Airborne asbestos data that have been sampled and analyzed in the above industries during 1994-2006 were collected. These data were reviewed to scrutinize the qualified data based on the records such as sampling and analyzed method and quality control procedures. All asbestos data were generated using the National Institute for Occupational Safety & Health (NIOSH) Method 7400. Results: Average concentration of asbestos fiber was 2.14 fibers/cc(0.02-15.6 fibers/cc) in the asbestos textile industry, 0.26 fibers/cc(0.01-1.01 fibers/cc) in the building-materials industry, 0.15 fibers/cc(0.01-0.93 fibers/cc) in the brake-lining manufacturing industry, and 0.14 fibers/cc(0.03-1.36 fibers/cc) in the commutator producing industry. For these industries, the percentage of samples of which asbestos fiber concentrations above the limit of exposure(0.1 fibers/cc) was 97.6% in the asbestos textile industry, 62.3% in the building-materials industry, 53.5% in the brake-lining manufacturing industry, and 34.3% in the commutator producing industry. Asbestos fiber concentration was below the limit of exposure in the gasket producing, petrochemistry, musical instrument producing industries, and the brake-lining exchange operations. Conclusions: Airborne asbestos fiber level in the asbestos textile, brake-lining producing, commutator and building-material producing industries was above the limit of exposure, but in the gasket producing, petrochemistry, musical instrument producing industries and the brake-lining exchange operations were below the limit of exposure.

• 디지털콘텐츠학회 논문지
• /
• 제13권4호
• /
• pp.525-530
• /
• 2012

무선 센서 네트워크는 일반적으로 엔드 장치에 연결된 센서가 측정한 데이터를 코디네이터에게로 전달하는 자원이 한정된 장치들로 구성된다. 지그비는 무선 센서 네트워크에서 가장 많이 사용되는 프로토콜 중의 하나로서, 적정한 데이터 전송률을 가지면서 저전력, 저비용의 무선 통신을 지원하기 위해 표준으로 도입되었다. 이 논문에서는 TI의 CC2530 상에서 TI의 지그비 프로토콜 스택 이식과 UART 인터페이스를 구현하는 방법에 관하여 논의한다. 시리얼 포트를 통한 데이터 전송 과정을 시현함으로써 구현한 보드가 올바르게 동작됨을 보인다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.247-252
• /
• 2006

Almost ship monitoring systems are event driven alarm system which warn only when the measurement value is over or under set point. These kinds of system cannot warn until signal is growing to abnormal state that the signal is over or under the set point. therefore cannot play a role for preventive maintenance system. This paper proposes fault diagnosis method which is able to diagnose and forecast the fault from present operating condition by analyzing monitored signals with present ship monitoring system without any additional sensors. By analyzing the data with high correlation coefficient(CC), correlation level of interactive data can be defined. Knowledge base of abnormal detection can be built by referring level of CC(Fault Detection CC. FDCC) to detect abnormal data among monitored data from monitoring system and knowledge base of diagnosis built by referring CC among interactive data for related machine each other to diagnose fault part.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.281-286
• /
• 2005

Almost ship monitoring systems are event driven alarm system which warn only when the measurement value is over or under set point. These kinds of system cannot warn while signal is growing to abnormal state until the signal is over or under the set point and cannot play a role for preventive maintenance system. This paper proposes fault diagnosis method which is able to diagnose and forecast the fault from present operating condition by analyzing monitored signals with present ship monitoring system without additional sensors. By analyzing this data having high correlation coefficient(CC), correlation level of interactive data can be understood. Knowledge base of abnormal detection can be built by referring level of CC(Fault Detection CC, FDCC) to detect abnormal data among monitored data from monitoring system and knowledge base of diagnosis built by referring CC among interactive data for related machine each other to diagnose fault part.

• 한국산업보건학회지
• /
• 제5권1호
• /
• pp.16-39
• /
• 1995

From July 8 to September 2 1994, asbestos exposure level among asbestos textile workers was surveyed. Six plants out of plants in Korea were selected for this study. In addition to the exposure level, the relationship between the level of exposure and some factors affecting exposure were studied. Also, using historical data of asbestos concentrations in asbestos textile plants plus current data, trend of asbestos exposure level could be introduced. Historical exposure level was estimated on the basis of these data. The main results of this study are follows. 1. Average concentration of all six plants surveyed was 1.54 f/cc, and range of those concentrations was 0.03 - 11.58 f/cc. The minimum average concentration was 0.32 f/cc and the maximum was 8.04 f/cc which is four times higher than the Korean standard. A wide difference of exposure level among the workers of different plants was observed. In three plants, the half of all the plants surveyed, their average concentrations exceeded the Korean standard, and those in all the plants exceeded the ACGIH TLV. 2. Among total 56 samples, 22 samples(39%) were in excess of the Korean standard, and 53 samples(95%) were above the ACGIH TLV. Among 32 personal samples, 15 samples(47%) exceeded the Korean standard, and 30 samples(94%) exceeded the ACGIH TLV. Among 24 area samples excluding a few samples collected in office area, seven samples exceeded the Korean standard, and 23 samples( 96%) exceeded the ACGIH TLV. 3. Distributions of concentrations were observed by processes. In weaving, the highest, average concentration was 4.29 f/cc, and range was 2.61 - 11.58 f/cc. In spinning, average concentration was 2.22 f/cc, and range was 0.41 - 8.93 f/cc. In carding, average concentration was 1.98 f/cc, and range was 0.23 - 10.93 f/cc, In twisting, average concentration was 1.65 f/cc, and range was 0.21 - 9.83 f/cc. In mixing, the lowest, average concentration was 0.48 f/cc, and range was 0.22 - 1.20 f/cc. 4. All the samples from basic processes of asbestos textile plants were above the ACGIH TLV. Nineteen samples(45%) out of all these 42 samples exceeded Korean standard. Fourteen samples(58%) of total 24 personal samples, and five samples(28%) of total 18 area samples exceeded the Korean standard. Considering processes, all the samples in weaving process exceeded the Korean standard and 50 did 54% of those in spinning, 40% in carding, and 27% in twisting. 5. Trend of decreasing asbestos concentrations in asbestos textile plants was observed by time. 6. Asbestos concentrations in asbestos textile plant in 1975 were estimated to be 11.0 - 92.4 f/cc.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권3호
• /
• pp.15-20
• /
• 2018

No-insulation (NI) pancake magnets are fabricated using Rare earth-Barium-Copper Oxide (REBCO) coated conductor (CC) tapes, which enabled a very compact magnet in the aspects of high critical current density ($J_c$) and high mechanical strength by removing insulation and allowing thinner stabilizer. They have also advantages such as self-quench protection. Therefore, it does not need quench detection and protection that can be very challenging in a high critical temperature ($T_c$) superconducting magnet technology. Recently, it was reported that the NI REBCO CC magnets have some drawbacks of long charging time and high field ramp loss which will be a concern in the operation of cryocooled magnets. These issues are related to the turn-to-turn contact resistivity and can be released by managing it. This is also closely related to the activity of reducing the contact joint resistance in the case of CC joints for long length CC fabrication. Therefore, in this study, the turn-to-turn contact resistance ($R_c$) at the CC contact part of differently stabilized CC tapes was measured. The behaviors of $R_c$ at CC contact parts according to the applied contact pressure were investigated. The range of $R_c$ measured for CC tapes adopted will provide fundamental data for design and fabrication of the CC NI coils.