• Progress in Superconductivity and Cryogenics
• /
• v.12 no.3
• /
• pp.16-20
• /
• 2010

For large scale power applications of HTS conductor, it is getting more important to have a stacked HTS coated conductor with low loss and large current capacity. But it was not easy to measure some electric properties. Stabilizer free YBCO CC for striated/ stacked conductors is easily burned out during the measurement of the critical current density because it has no stabilizer and it is difficult to set-up the current lead and voltage taps because it has many pieces of YBCO CC in a conductor. Instead of direct measuring the critical current of a stacked HTS coated conductor, indirect estimation from measuring a magnetization loss of HTS coated conductor could be useful for practical estimation of the critical current. The magnetization loss of a superconductor is supposed to be affected by a full penetrating magnetic field, and it tends to show an inflection point at the full penetrating magnetic field when we generate the graph of magnetization loss vs. external magnetic field. The full penetrating magnetic field depends on the shape of the conductor and its critical current density, so we can estimate the effective critical current density from measuring the magnetization loss. In this paper, to prove the effectiveness of this indirect estimation of the critical current, we prepared several different kinds of YBCO CC(coated conductor) including a stacked conductor short samples and measured the magnetization losses and the critical currents of each sample by using linked pick up coils and direct voltage measurement with transport current respectively.

• Korean Journal of Plant Resources
• /
• v.36 no.2
• /
• pp.107-121
• /
• 2023

This study analyzed the polyphenol, flavonoid contents, antioxidant activity, anti-aging activity and phenol component contents of Saccharina japonica (SJ), Costaria costata (CC) extracts with hot water, 95% methanol, 95% prethanol for investigating possible utilization of SJ and CC extracts. The result revealed that the SJ and CC methanol extracts showed the highest polyphenol and flavonoid contents, 4.63 mg TAN/g, and 4.19 mg QUE/g respectively. Also, the SJ and CC methanol extracts showed higher antioxidant activity than prethanol and hot water extracts, whereas the ABTS radical scavenging activities were the highest in prethanol extracts (IC₅₀ = 15.4, 10.3 ㎍/µL). In anti-aging activity for evaluating the anti-wrinkle activity and skin whitening activity, the CC methanol extracts had high collagenase inhibitory activity (88.3%), and the SJ prethanol extracts showed higher elastase inhibitory activity (19.0%) compared to other extracts. Then the tyrosinase inhibitory activity was significantly higher in the SJ and CC methanol extracts (41.8, 30.3%, respectively), whereas prethanol extracts were the lowest. To identify the phenol component contents of SJ and CC extracts, 4-hydroxybenzoic acid, naringenin, naringin and nicotinic acid were measured using LC-MS/MS. As a result, the phenol contents were the highest in SJ methanol extract (4-hydroxybenzoic acid), SJ and CC prethanol extract (naringin and naringenin) and CC prethanol extract (nicotinic acid). Lastly, the antioxidant activity of SJ and CC showed high correlations with polyphenol and flavonoid contents (R = -0.946~0.883). These results suggest that prethanol or methanol extracts of SJ and CC have higher antioxidant activities, anti-aging activity and the potential to be used as material for health functional food and cosmetics.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.5-8
• /
• 2004

본 논문은 보안제품 적합성 검중을 위한 자동화 도구를 리눅스 기반에서 구현하였으며, 구현된 적합성 검증 자동화 도구를 이용하여 TCP/IP 5Layer중 IP Layer 이상의 계층에서 보안성을 제공하는 제품들에 대한 무결성 테스트를 실시하였다. 그리고 CC(Common Criteria) 기반의 적합성 검증 절차를 연구하여 구체적인 보안제품의 보호파일에 대한 제안을 제기했다. 구현된 적합성 검증 자동화 도구를 이용하여 개발된 보안제품의 안정성을 테스트할 수 있으리라 예상되며, 제안된 보호파일은 구체적인 평가항목으로 국가기관에서 보안제품의 평가 시 사용될 수 있으리라 예상된다.

• Review of KIISC
• /
• v.17 no.6
• /
• pp.41-56
• /
• 2007

정보시스템의 보호를 위한 정보보호 제품의 경우, CC를 바탕으로 하는 '정보보호시스템 평가제도'를 통해 평가 및 인증하며, 정보보호제품을 구현한 암호모듈의 경우, '암호모듈검증제도'(CMVP)를 통해 시험 및 검증한다. 본 글에서는 사실상의 국제기준인 미국 및 카나다의 CMVP의 새로운 검증기준 후보인 FIPS PUB 140-3의 변화내용을 분석한다. 또한, FIPS 140-1, FIPS 140-2, ISO/IEC 19790(즉, FIPS 140-2의 국제표준)의 내용과도 비교한다.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.71-76
• /
• 2002

The real scale tunnel fire tests are carried out for the first time in domestic range to assess the extent of risk in the tunnel fire. The tunnel dimension is 465 m in length, 9.2 m in width and 6.5 m in height. Gasoline pools with 0.25 MW∼2.5 MW size and a 1500CC passenger car are used as fire sources. Six jet fans are used to change the flow velocity inside the tunnel. Temperatures at total 86 points in the tunnel are measured to find the temperature distribution and smoke behavior in the real tunnel fire. In the experiment, it is examined that the important parameters to assess the extent of risk in tunnel fire such as back layering of smoke front, descending of smoke layer and the fire size of a real passenger car.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.449-454
• /
• 2009

In this paper, we analyze the hardware and software platform for constructing the USN in the vessel environment. Specifically, we analyze the mote technology based on the CC2420 in the hardware platform and analyze the TinyOS platform in the software platform. We also analyze the physical layer of IEEE802.15.4 which is the standard of the USN communication. In the simulation, we evaluate the performance in the physical layer of ZigBee/IEEE 802.15.4 by using the MATLAB and verify the validity of constructing the USN in the vessel environment based on the simulation results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.180-188
• /
• 2011

Recently a number of researches about mechanical splice have been studied to apply on a large diameter reinforcing steel bars of spliced sleeves. In this study the structural performance of large diameter reinforcing bars with spliced sleeves was evaluated. For the application of nuclear power plant structures, two different types of existing splices with #11, 14, 18 rebars were fabricated and static and dynamic test were performed on the basis of ASME SEC III DIV.2CC-4330.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.53-60
• /
• 2015

Purpose : The purpose of this study is to evaluate the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. Materials and Methods : The phantom is produced to equally describe prostate and rectum based on a 3D volume contour of an actual prostate cancer patient who is treated in Asan Medical Center by using a 3D printer (3D EDISON+, Lokit, Korea). CT(Computed tomography) images of phantom are aquired by computed tomography (Lightspeed CT, GE, USA). By using treatment planning system (Eclipse version 10.0, Varian, USA), treatment planning is established after volume of a prostate cancer patient is compared with volume of the phantom. MOSFET(Metal OXIDE Silicon Field Effect Transistor) is estimated to identify precision and is located in 4 measuring points (bladder, prostate, rectal anterior wall and rectal posterior wall) to analyzed treatment planning and measured value. Results : Prostate volume and rectum volume of prostate cancer patient represent 30.61 cc and 51.19 cc respectively. In case of a phantom, prostate volume and rectum volume represent 31.12 cc and 53.52 cc respectively. A variation of volume between a prostate cancer patient and a phantom is less than 3%. Precision of MOSFET represents less than 3%. It indicates linearity and correlation coefficient indicates from 0.99 ~ 1.00 depending on dose variation. Each accuracy of bladder, prostate, rectal anterior wall and rectal posterior wall represent 1.4%, 2.6%, 3.7% and 1.5% respectively. In- vivo dosimetry represents entirely less than 5% considering precision of MOSFET. Conclusion : By using a 3D printer, possibility of phantom production based on prostate is verified precision within 3%. effectiveness of In-vivo dosimetry is confirmed from a phantom which is produced by a 3D printer. In-vivo dosimetry is evaluated entirely less than 5% considering precision of MOSFET. Therefore, This study is confirmed the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. It is necessary to additional phantom production by a 3D printer and In-vivo dosimetry for other organs of patient.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2087-2090
• /
• 2002

최근 보안성 평가기준의 국제 표준인 공통평가기준(Common Criteria, ISO/IEC 15408)의 국내 도입이 활발하게 진행되고 있다. 따라서 개발자들은 개발초기부터 공통평가기준에 대비하여 보안 제품을 개발하는 것이 필요하다. 본 논문에서는 공통평가기준과 공통평가방법론(Common Evaluation Methodology, CEM)을 참고하여 개발자들이 공통평가기준에 대비하여 보안 제품을 개발할 수 있도록 하기 위한 개발 지침을 제시한다.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.335-339
• /
• 2001

국외의 경우엔 일찍부터 컴퓨터 시스템 평가기준이 제정되어 활용중이나 국내의 경우엔 아직 평가기준이 없는 상태이다. 본 논문에서는 국내외 정보시스템의 보안 요구사항과 보증 요구사항을 바탕으로 리눅스 기반 PC의 보안성 평가기준을 제안하고자 한다. 평가등급은 KL(Korea Linux)1, KL2, KL3 등의 3등급으로 분류하였다. 제안된 평가기준은 오픈 소스기반의 리눅스를 이용하여 보안기능을 강화한 운영체제 개발방향을 제시하였고, 보안 시스템 구축의 방향 및 보안표준에 대한 복잡한 문제를 줄였다. 또한 국제공통평가기준(CC : Common Criteria)의 보안기능부분과 보증부분을 거의 수용함으로써, 외국의 보안성 평가기준과 상호 운용이 가능하다.