• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.300-304
• /
• 2010

This study was performed to development a dental three-dimensional laser scanning system and measure the accuracy of new adjustable upper dental impression tray. The metal stock, individual, and new adjustable stock trays were used for 30 stone casts(10 casts each) duplicated a resin master model of maxilla. The dental stone was poured in a vinyl polysiloxane impressions and allowed to set for on hour. The master model and the duplicated casts were digitized using an dental scanning system. The distance between the reference points were measured and analyzed on the graphic image of 3D graphic software of CATIA. The statistical significance of the differences between the groups was determined by a two-way ANOVA. There were no significant differences between the accuracies of the adjustable stock tray and the master model except only anterior arch width on the upper arch. The adjustable upper stock tray showed clinically acceptable accuracies of the study cast produced by them.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.211-218
• /
• 2002

Swept volumes have been used in a wide variety of applications, and the literature contains much discussion of methods for computing the swept volumes in many situations. However, the commercially available CAD systems do not support the operations of generating the swept volumes enough to satisfy a variety of users' needs. In this paper, we present a new, simple and efficient algorithm for computing the swept volume of moving a polyhedron in 3-D region. The screw motion is used to describe the sweep motion of a polyhedron, because of its simplicity and computational advantages. The boundary of a swept volume is the result of combining the envelope surfaces and the partial boundaries at the initial and final position of a polyhedron. Some portions of these boundaries are inside the swept volume. We develop the algorithm to remove these interior portions. Then, to implement our algorithm, it is performed to integrate our program with the commercial CAD software, CATIA.

• CDE review
• /
• v.3 no.2
• /
• pp.52-58
• /
• 1997

제품 개발 환경을 자세히 들여다보면, 고객의 요구 또는 창조된 새로운 제품의 컨셉(Spec)을 사람(개발자)이 도구(설계경험, CAD)를 이용해서 업무수행절차(업무처리규정, 부서별 역할)에 따라 제품을 정의(모양, 크기, 구조)하는 것을 설계행위로 볼 수 있고, 이러한 활동의 결과로써 도면 Mock-up, 각종 Document가 만들어지고 이러한 매체가 부서간, 업무공정간 의사소통의 수단으로 이용되고 있다. 여기서 CAD를 없애서는 안될 개발의 도구로 인식하고 이용하는데, 일반적으로 경쟁력있는 제품을 개발하기 위한 노력의 일환으로 3차원 CAD시스템을 도입하여 적용해 오고 있다. 현재의 3차원 CAD시스템들은 공통적으로 솔리드(Solid) 근간에, FEATURE 개념을 수용하면서 PARAMETRIC 또는 VARIATIONAL 모델링 기법을 채택하여 설계자들에게 다양한 기능을 제공하고 있다. 그러나 3차원 CAD 시스템을 적용하여 만족할 만한 결과를 얻어내기란 간단한 문제가 아니다. 본 고에서는 당 사업장에서 개발한 무선전화기 및 FAX에 3차원 설계를 적용한 사례를 중심으로, 3차원 설계에 대한 허와 실을 살펴보고 3차원 설계가 나아가야 할 방향에 대해 생각해 보고자 한다. 참고로 당 사업장은 디자인, 기구설계, 금형설계까지는 I-DEAS, CAM 작업은 CATIA를 이용하고 있다.

• Structural Engineering and Mechanics
• /
• v.55 no.1
• /
• pp.1-27
• /
• 2015

This article presents a theoretical parametric analysis on the ultimate torsional behaviour of axially restrained reinforced concrete (RC) beams. This analysis is performed by using a computing procedure based on a modification of the Variable Angle Truss Model. This computing procedure was previously developed to account for the influence of the longitudinal compressive stress state due to the axial restraint conditions provided by the connections of the beams to other structural members. The presented parametric study aims to check the influence of some important variable studies, namely: torsional reinforcement ratio, compressive concrete strength and axial restraint level. From the results of this parametric study, nonlinear regression analyses are performed and some design charts are proposed. Such charts allow to correct the resistance torque of RC beams (rectangular sections with small height to width ratios) to account for the favorable influence of the axial restraint.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.123-129
• /
• 2012

This study was carried out to improve the design of fuel injection pump for marine medium diesel engine. For this purpose, all parts of fuel injection pump were modeled and simulated using CATIA V5R19, FLUENT & MSC Nastran. Flow analysis for plunger cylinder and structural analysis for plunger, roller and spring, which were considered as essential parts of fuel injection pump, were performed to find the optimal design of fuel injection pump. As the results, flow of fluid in plunger cylinder was showed good results in case of 7.7~8.0m/s of plunger velocity. Furthermore, it was confirmed that plunger, roller and spring could be operated safely under 1,800bar pressure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.159-164
• /
• 2011

This paper is about the frame for an all terrain vehicle(ATV). An all terrain vehicle, also known as an ATV, has a seat designed to comfortably accommodate a rider over a wide variety of rugged terrain. This study developed and evaluated a buffer system to drive safely and reduce impact force on the load. The Frame includes a main frame portion which has one or more support frames. The buffer system with a double cushion system, one or more of the interaction of the shock absorber is constructed. The 3D modeling of ATV frame is built up with the software CATIA. According to the designing requirement, we analyzed the stress and the deformation of the frame.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.134-138
• /
• 2014

Power packs can change energy to hydraulic energy generated by an engine as a tool for use with civil engineering construction equipment. This paper determines which type of power pack meets the standards of construction machinery. A power pack was formulated as a three-dimensional model by using the software CATIA. A modal analysis was conducted using ANSYS Workbench, and the resonance was checked. Next, a harmonic analysis was conducted. The analytical results show that the dynamic stability of the power pack is assured.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.99-103
• /
• 2014

A hypoid gear is a type of spiral bevel gear whose axis does not intersect with the axis of the meshing gear. The size of a hypoid gear is compact and the ratio of contact is high; therefore, the noise is lower than in other types. Due to these characteristics, the hypoid gear is commonly used in manufacturing processes such as those of escalators and subway screen doors. The purpose of this paper is to develop a reducer using the hypoid gear. In order to check the stability of the proposed reducer, 3D modeling is carried out by CATIA, and a structural analysis is performed using FEM (a finite element method).

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.69-74
• /
• 1999

This paper aims to DNC application of car seat cushion die. DNC systems are consist of CAD(CATIA1, CAM(Z-MASTER, OMEGA) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.119-125
• /
• 2008

A new type of swivel unit is suggested in order to complement weak points of the existing. This new type of Swivel unit is developed by adopting a spring type cable which has elasticity and restoring force. To minimize the troubles in the process of manufacturing during operating the new type system, strength analysis and the check of interference between parts are accomplished with CATIA. The check of rotating performance is also carried out to determine the diameter and length of spring type cable by SimDesigner motion analysis. Swivel unit used in the robot spot welding is developed with spring type cable and its usefulness in the industrial field is verified through experiments. This system has been registered for patent.