• 해양환경안전학회지
• /
• 제21권1호
• /
• pp.83-90
• /
• 2015

육지와 도서를 연결하는 차도선은 교통수단 기능과 물자수송을 담당하는 중요한 역할을 하고 있다. 이에 따라 차도선의 효율성 증대와 안전성 향상 및 경제적 요건 등을 고려한 선박이 개발 중이다. 유럽에서는 승객의 편의성 및 경제성을 고려하여 양방향 차도선(Double-ended Car Ferry)의 개발이 활발히 진행 중이며 국내에서도 이에 대한 연구 개발이 필요하다. 본 연구에서는 유한요소법을 이용하여 차도선 제작 시 축계의 제작 및 강도의 문제를 Campbell Diagram 및 Modal 해석을 통한 동특성 분석을 하였다. 이를 통하여 양방향 차도선의 추진 방향 및 후진 방향 축계 작동 시 공진 현상 및 위험속도를 분석 결과 안정성을 보인 것으로 판단된다.

• 한국융합학회논문지
• /
• 제10권11호
• /
• pp.321-326
• /
• 2019

대중교통의 이용량이 증가해 감에 따라 그 중 자동차의 연비를 올리기 위하여 많은 연구들이 수행되고 있다. 본 연구의 목표는 자동차의 3가지 모델을 통해 자동차의 연비를 높일 수 있기 위하여 전방 차체를 설계하고자 하는 것이다. 모든 모델들은 CATIA 프로그램으로 설계되었고 ANSYS 프로그램으로 자동차의 외부 공기에 대한 유동해석을 모델별로 수행하였다. 시속 90km/h의 운행 속도에서는 차체가 길쭉할수록 공기의 저항을 덜 받아 연비를 높일 수 있는 효과가 있다고 사료된다. 본 연구를 통하여 기차의 효율성을 극대화할 수 있는 자동차의 전방 차체를 설계하는데 도움이 될 수 있다. 본 연구에서의 자동차 내부에 있는 라디에이터 위치에 따른 유동 해석에 관한 설계 데이터를 이용함으로서 실제적인 자동차에서의 부품에 융합하여 그 미적 감각을 줄 수 있다.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.90-97
• /
• 2009

One of the most important factors that affect a person's risk of injury in a motor vehicle crash is the age of the person. This study investigates the characteristics of crash injuries among young, middle-aged and older drivers and occupants. Based on the comprehensive claim data from automobile insurance from 2000 to 2007, this study examines in great detail the drivers and occupants injury body regions and severity by age in car-to-car frontal crashes. It has been shown that elderly drivers and occupants suffer more injuries at a chest region compared to the middle-aged group. This research calls attention to the need for design to make vehicles more protective for older drivers in car-to car frontal crashes.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.97-106
• /
• 2011

Both an optimal design of the engine operating strategy and fuel economy prediction technique for a HEV under the vehicle driving condition are very crucial for the development of vehicle fuel economy performance. Thus, in this study, engine operating characteristics of PRIUS III were analyzed with vehicle running conditions and the correlations between vehicle tractive power and fuel consumption were introduced. As a result, fuel economy performance of PRIUS III with various test modes were predicted and verified. Errors of predicted fuel economy were between -5% and -1%.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.212-216
• /
• 2001

Recently, it has been trending toward speed-up not only in the passenger car but in the freight cu. In this study, we thus performed stress analysis for the carbody for high speed container freight car in use and field test of the freight car in Gyungbu-line so that we may utilize the results as a design guide for speed-up hereafter- Five vertical loading conditions due to dynamic effect and the weight of the carbody and the container applied to locking devices of the carbody and its results are compared with that of a test, As a result, we found that there is need to complement the strength of the carbody in some measure when speed up the present freight car.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.437-445
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed of the train but also to reduce the vibration. In this study, an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral, rolling and yawing motion of the car body and the bogie. The numerical analysis for the equation motions with 17 degrees of freedom showed the running stability and the critical speed due to the snake motion. Also the vibration modes of the high speed freight car was calculated using ADAMS RAIL software, which showed that the critical speed have the yawing modes of the car body and the bogie.

• 소음진동
• /
• 제10권5호
• /
• pp.806-810
• /
• 2000

This paper presents a practical method for reduction of interior noise and improvement of sound quality in compartment of passenger car. The tested vehicle has a booming noise problem at rear passenger seats. In order to identify the transfer path of interior noise, the running modal analysis, the vibro-acoustic frequency transfer response and the noise path analysis are systematically employed. Using these various methods, it has been founded that the rear part of the roof of the test car was a noise source for the booming noise. Through the modification of the roof, the booming noise has been reduced and sound quality inside car also has been improved.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.38-42
• /
• 2004

The optimal design for a leading car considering the aerodynamic resistance is required on the high-speed train due to increasing of ratio of drag force with proportion for the square of velocity. The aerodynamic analysis using CFD in the stage of concept design offers more economical analysis method which is used to estimate the influence of flow and pressure around the leading car than the experimental method using the Mock-up. In this study, we want to assist the artistic design with aerodynamics analysis in order to get the optimal design for leading car made of composite material. The results of aerodynamic analysis for two leading car models, which one is expressed with lineal beauty and the other is with curvaceous beauty, are compared with each other and offer the proposal of modification for two models in order to decrease be drag force. The shape of curvaceous model is better for the pressure force but slightly worse for the viscous force than the other. The Fluent software is used for the calculation of flow profile in this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.351-357
• /
• 2003

The optimal design for a leading car considering the aerodynamic resistance is required on the high-speed train due to increasing of ratio of drag force with proportion for the square of velocity. The aerodynamic analysis using CFD in the stage of concept design offers more economical analysis method which is used to estimate the influence of flow and pressure around the leading car than the experimental method using the Mock-up. In this study, we want to assist the artistic design with aerodynamics analysis in order to get the optimal design for leading car with the operation speed at 180km/h. The results of aerodynamic analysis for two leading car models which one is expressed with lineal beauty and the other is with curvaceous beauty are compared with each other and they offer the proposal of modification for two models in order to decrease the drag force. The shape of curvaceous model is better for the pressure force but slightly worse for the viscous force than the other. The Fluent software is used for the calculation of flow profile in this study.

• 한국융합학회논문지
• /
• 제11권6호
• /
• pp.209-213
• /
• 2020

본 연구에서는 경주용 자동차에서 기존에 사용 중인 형상을 가진 모델 A와 경량화를 한 모델 B를 설계하고 열 변형과 열응력을 동반한 구조해석을 하였다. Model A가 Model B에 비하여 최고온도가 낮음을 보인다. 다른 냉각 조건이 주어지지 않고 디스크의 형상에 따른 냉각성능은 Model A가 더 뛰어남을 알 수 있다. Model A가 Model B에 비하여 거의 2배 이상으로 그 열응력이 낮아져 내구성면에서도 우수함을 알 수 있었다. 응력이 가장 크게 나타나는 부분은 형상에 관계없이 허브와 접합되는 구멍으로 나타났다. 본 연구에서의 해석결과는 실제 자동차 브레이크 디스크의 형상을 설계하는데 있어서 유용하다고 보인다. 본 연구에서 얻은 해석 결과는 실제적으로 경주용 자동차 브레이크 디스크의 강도를 파악하는 데에 적용될 수 있다. 경주용 자동차 브레이크 디스크의 해석 결과를 이용함으로서, 본 연구가 미적인 설계 및 해석이 적용된 융합 연구라고 보여진다.