• 한국분무공학회지
• /
• 제13권3호
• /
• pp.134-142
• /
• 2008

In the case of heavy duty diesel engines, the Urea-SCR system is currently considered to reduce the NOx emission as a proved technology, and it is widely studied to get the high performance and durability. However, the nozzles to inject the urea-water solution into the exhaust pipe occur some problems, including the nozzle clogging, deposition of urea-water solution on the inner wall of the exhaust pipe, resulting in the production of urea salt. In this study, a swirl-type twin-fluid nozzle to produce more fine droplets was used as a method to solve the problems. The effect of the nozzle cap geometry, including the length to diameter ratio ($l_o/d_o$) and chamfer, on the spray characteristics were investigated experimentally. The length to diameter ratio of nozzle cap were varied from 0.25 to 1.125. The chamfer angle of the nozzle cap was constant at 90o. The mean velocity and droplet size distributions of the spray were measured using a 2-D PDA (phase Doppler analyzer) system, and the spray half-width, AMD (arithmetic mean diameter) and SMD (Sauter mean diameter) were analyzed. At result, The larger length to diameter ratio of nozzle cap were more small SMD and AMD. The effect of the chamfer did increase the radial velocity, while it did not affect the atomization effect.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2165-2171
• /
• 2015

최근 생활환경의 개선과 의학기술의 발달로 인해 성인병 질환을 앓고 있는 환자의 경우 병원 입원 치료 보다는 통원치료를 통한 주기적인 약물 복용이 증가하고 있다. 이러한 성인병 환자의 경우 주기적인 약물 치료가 유지되기 위해 복약관리에 보다 많은 관심이 요구되고 있다. 본 논문에서는 환자의 주기적이고 안정적인 복약을 위한 NFC 기반의 u-Drug Cap 을 이용한 복약정보 서비스 시스템을 제안하고 개발된 시스템과 테스트 결과를 기술한다. 개발된 시스템은 성인병을 앓고 있는 환자나 고령 환자의 올바른 복약 지도 및 알람을 통해 약품 미복용 및 오복용 방지함으로써 환자의 건강 유지가 가능할 것으로 기대된다.

• 한국대기환경학회지
• /
• 제23권1호
• /
• pp.50-63
• /
• 2007

The development of domestic plant specific emission factors is very important to estimate reliable national emissions management. This study, for the reason, was carried out to obtain advances emission factor for Carbon Dioxide ($CO_2$) by source-specific emission tests from the iron and steel industry sector which is well known as one of the major sources of greenhouse gases ($CO_2$). Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$. There was no good information available on $CO_2$ plant specific emission factors from the iron and steel industry in Korea so far. The major emission sources of $CO_2$ examined from the iron and steel manufacturing precesses were a hot blast stove, coke oven, sintering furnace, electric arc furnace, heating furnace, and so on. In this study, the concentration of $CO_2$ from the hot blast stove process was the highest among all processes. The $CO_2$ emission factors for a ton of Steel and Iron products (using B-C oil) were estimated to be 0.315 $CO_2$ tonne (by Tier 3 method) and 4.89 $CO_2$ tonne. In addition, emission factor of $CO_2$ for heating furnace process was the highest among all process. Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.20-25
• /
• 2003

Various welding methods such as Gas Tungsten Arc Welding(GTAW), magnetic force electrical resistance welding and Laser Beam Welding(LBW) are now available for end cap closure of nuclear fuel rods. Even though the resistance and GTA welding processes are widely used in manufacturing commercial fuel rods, they can not be recommended for the remote seal welding of fuel rods in the hot cell Facility due to the complexity of the electrode alignment, the difficulty in replacing parts in a remote manner and the large heat input for the thin sheath. Therefore, the Nd:YAG laser system using optical fiber transmission was selected for the end cap welding of irradiation fuel rods in the hot cell. The remote laser welding apparatus in the hot cell Facility was developed using a pulsed Nd:YAG laser of 500 watt average power with an optical fiber transmission. The weldment quality such as microstructure and mechanical strength was satisfactory. The optimum conditions of laser welding for encapsulating irradiation fuel rods in the hot cell were obtained.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.610-615
• /
• 2003

With the growing competitive pressure from market participants, utilities, consumer and government, analyses of existing competitive electricity market become more important. The presence of congestion in the transmission system can significantly increase the potential of exercising market power. Since the congestion in the network depends on the several factors, the market power cannot be simply analyzed through the existing indices. This paper presents a systematic analysis on local market power under uniform pricing scheme and provides determining approach of the level of price cap as mitigation measure of the strategic market power.

• 대한수학회보
• /
• 제30권2호
• /
• pp.213-221
• /
• 1993

In this paper, we will show that the multiplicative group G in a finite ring R with identity 1 has a (B, N)-pair satisfying the following conditions; (1) G=BNB where B and N are subgroups of G. (2) B.cap.N is a normal subgroup of N and W = N/(B.cap.N), is generated by a set S = { $s_{1}$, $s_{2}$, .., $s_{k}$} where $s_{i}$.mem.N/(B.cap.N), $s_{i}$$^{2}$.iden.1 and $s_{i}$.neq.1. (3) For any s.mem.S and w.mem.W, we have sBw.contnd.BwB.cup.BswB. (4) We have sBs not .subeq. B for any s.mem.S. When G, B, N and S satisfy the above conditions, we say that the quadruple (G, B, N, S) is a Tits system. The group W is called the Weyl gorup of the Tits system.ystem.m.

• 풍력에너지저널
• /
• 제5권1호
• /
• pp.50-55
• /
• 2014

Surface Permanent-Magnetic-Synchronous-Generator (SPMSG) discussed in the present study has operational characteristics such as high rotational speed over 1,000 rpm and centrifugal force of 12 kN·m for each magnet. Structure-development analysis for the minimization of rotor-core weights and the maximization of thermal emission is performed by applying the aluminum-laminated cap which combines the advantages of IPM and SPM in order to overcome the difficulty that attaching the magnet to rotor-core only with an adhesive. In this study, the simulations in terms of structure and electromagnetic were performed with the variable parameters such as shape and thickness of laminated-cap and division method of magnet. As a result, condition for minimized centrifugal force with minimum loss is derived.

• 대한환경공학회지
• /
• 제30권3호
• /
• pp.250-256
• /
• 2008

• Journal of Applied Biological Chemistry
• /
• 제43권3호
• /
• pp.125-130
• /
• 2000

An antiviral protein (CAP30) with ribosome-inactivating activity was purified from the leaves of Chenopodium album L. through ammonium sulfate precipitation and column chromatography using S-Sepharose, Blue-Sepharose, FPLC Suprose12 HR, and FPLC Mono-S. The molecular wight of CAP30 was estimated to be 30kD. CAP30 was thermostable, maintaing its activity even after incubation at $70^{\circ}C$ for 30 min, and was stable in the pH range of 6 to 9. In a cell-free in vitro translation system using rabbit reticulocyte lysate, protein synthesis was inhibited by the addition of CAP30 with an $IC_{50}$ of 2.26pM. The comparison of N-terminal amino acid sequences of this protein with known ribosome-inactivating proteins (RIPs) revealed that it had some sequence homology with PAP-S and PAP-R from pokeweed (Phytolacca americana)and dodecandrin from P. dodecandra, but had no sequence homology with RIPs from other plants belonging to different orders. The mosaic symptoms on tobacco leaves caused by cucumber mosaic virus infection was completely inhibited by 100 ng/ml of the pure CAP30 protein.

• Journal of Astronomy and Space Sciences
• /
• 제29권3호
• /
• pp.259-267
• /
• 2012

Polar cap potential has long been considered as an indicator for the amount of energy flowing in the magnetosphere-ionosphere system. Thus, the estimation of polar cap potential is important to understand the physical process of the magnetosphere. To estimate the polar cap potential in the Northern Hemisphere, merging electric field by Kan & Lee (1979) is adopted. Relationships between the PC index and calculated merging electric field ($E^*$) are examined during full-time and storm-time periods separately. For this purpose Dst, AL, and PC indices and solar wind data are utilized during the period from 1996-2003. From this linear relationship, polar cap potential (${\Phi}^*$) is estimated using the formula by Doyle & Burke (1983). The values are represented as $58.1{\pm}26.9$ kV for the full-time period and $123.7{\pm}84.1$ kV for a storm-time period separately. Considering that the average value of polar cap potential of Doyle & Burke (1983) is about 47 kV during moderately quiet intervals with the S3-2 measurements, these results are similar to such. The monthly averaged variation of Dst, AL, and PC indices are then compared. The Dst and AL indices show distinct characteristics with peaks during equinoctial season whereas the average PC index according to the month shows higher values in autumn than in spring. The monthly variations of the linear correlation coefficients between solar wind parameters and geomagnetic indices are also examined. The PC-AL linear correlation coefficient is highest, being 0.82 with peaks during the equinoctial season. As with the AL index, the PC index may also prove useful for predicting the intensity of an auroral substorm. Generally, the linear correlation coefficients are shown low in summer due to conductance differences and other factors. To assess the role of the PC index during the recovery phase of a storm, the relation between the cumulative PC index and the duration is examined. Although the correlation coefficient lowers with the storm size, it is clear that the average correlation coefficient is high. There is a tendency that duration of the recovery phase is longer as the PC index increases.