• Journal of Biosystems Engineering
• /
• 제26권3호
• /
• pp.229-236
• /
• 2001

The torque loads acting on the input shaft of the transmission and final driving shaft of the tractor having a cage wheel attached to the driving tries as a traction aid were measured during the rotavating operations in a poorly drained paddy field. Using the measured load data load spectra were constructed. Effects of the design parameters of the cage wheel on the load characteristics were also analyzed. The torque load exerted on the input shaft decreased as the diameter of the cage wheel increased and increased as the rotavator speed increased. The torque load exerted on the final driving shaft increased as the working speed of the tractor increased and decreased as the rotavator speed increased. The torque load on the final driving shaft with the cage wheel were greater than those without the cage wheel.

• 수산해양기술연구
• /
• 제52권2호
• /
• pp.79-87
• /
• 2016

Mobile fish-cage was developed assuming a cage net with an enclosed area, which and estimated the hydrodynamic characteristics of the cage through the model experiment. Flux-shielding plates, installed in the bow were compared with the resistance test carried out by making a hole, bilge keel and stud, and basic block flow rate consisting of the results to a flat surface plate. The experimental results confirmed the improved resistance performance effect of 3~6% in the bilge keel and the stud form. To assess the stability of the fish-cage, evaluation of the stability in accordance with the stability criteria for determining the floating docks had confirmed that it satisfied the static stability performance under operating conditions at sea.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1364-1367
• /
• 2003

These days, spinal interbody arthrodesis using fusion cage is very popular. The cage used for the spinal interbody arthrodesis is mainly inserted from the posterior of the spine. Accordingly, there could possibly occur damages at posterior and results in instability of structure. Moreover, one or two cages are inserted depending on the patients. In this study, it is attempted to evaluate the stability quantitatively by comparing two cases where one and two cages are inserted. For this purpose, a very fine 3-dimensional finite element model of vertebra is generated from the MRI data. From this vertebra model, two models are made: one with one cage and the other with two cages. Finally, finite element analys is performed for these two models and both of the mechanical behaviors are examined In addition, the effect on the stability is evaluated and compared quantitatively.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.101-108
• /
• 2000

The torque loads were measured at the input shaft of the transmission and driving shaft of the tractor having a cage wheel attached to the driving tires as a traction aid during. a rotavating operation in wet paddy fields with deep hardpan. Their load spectra were also calculated. Effects of design parameters of the cage wheel on the load characteristics were analyzed. The torque load exerted on the input shaft decreased as diameter of the cage wheel increased and increased as the rotating speed of the rotavator increased. The torque load exerted on the driving shaft increased as the working speed of the tractor increased and decreased as the PTO speed increased. Both the torque loads with the cage wheel were greater than those without the cage wheel. The cage wheel was developed for this study.

• 수산해양기술연구
• /
• 제32권2호
• /
• pp.117-124
• /
• 1996

The real size submersible fish cage($L{\times}B{\times}D$, $3{\times}3{\times}6$m)system consists of the compressed air equipment was made in order to control efficiently in case of heavy weather or environmental pollution such as red tide, and then carried out experiment on the submersible functions and safety for that cage at Koje inland sea in 14th June, 1995. The authors could confirm that the submersible cage was very stabilized it's submersible functions and safety when the cage was floating and sinking at sea.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2016

According to the recent increase in the height of supertall buildings, construction lift became one of most important equipment for vertical transportation of resources. However, increase in lifting load during peak time in which the resources are concentrated often causes a risk of construction delay. This study suggests a concept of Double-Cage construction lift, which is a lift with two cages attached together allowing transportation of resources on two consecutive work floors simultaneously. The aim of this study is to present a simulation model suitable for calculating hoisting time of Double-Cage construction lift. The proposed model is expected to be utilized when applying Double-cage construction lift for its efficient operation and management.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.464-469
• /
• 2019

테이퍼 롤러 베어링은 큰 부하 하중이 가해져도 안정적으로 차량을 지지할 수 있어서 승합차, 화물차, 열차 등에 핵심적인 구동 부품으로 광범위하게 사용된다. 테이퍼 롤러 베어링 부품 중에서 케이지는 롤러들 사이의 간격을 유지해 주며, 이를 통해서 마찰 방지 및 마모, 발열을 억제하고 윤활을 위한 공간을 제공해주는 등의 역할을 한다. 차량이 주행 중에 공진으로 인해 케이지가 심하게 변형되면 롤러가 원활한 구름 운동을 하지 못하거나, 케이지를 이탈하는 경우가 발생하게 된다. 따라서 베어링의 안정적인 내구성능을 확보하기 위해서는 케이지의 공진주파수를 파악하는 것이 매우 중요하다. 베어링 케이지는 구조적으로 동일한 형상이 반복되는 주기적 구조물로 볼 수 있는데, 이러한 구조물은 제작과정에서 설계 시 의도한 완벽한 기하학적 형상과는 어느 정도의 오차를 가진 형상으로 제작되게 된다. 본 연구에서는 이러한 케이지의 기하학적 불완전성이 동특성에 미치는 영향을 파악하고자 한다. 그 결과 기하학적인 불완전성에 의하여 이상적인 케이지의 고유진동수 부근에서 고유진동수 분리가 발생하며, 그 간격은 기하학적 오차의 크기에 비례하고 모드의 차수가 증가할수록 그 간격도 넓어진다고 판단된다.

• Fibers and Polymers
• /
• 제4권2호
• /
• pp.89-96
• /
• 2003

A vertebral cage is a hollow medical device which is used in spine forgery. By implanting the cage into the spine column, it is possible to restore disc and relieve pressure on the nerve roots. Most cages have been made of titanium alloys but they detract the biocompatibility. Currently PEEK (polyether ether ketone) if applied to various implants because it has good properties like heat resistance, chemical resistance, strength, and especially biocompatibility. A new shape of vertebral cage is designed and injection molding of PEEK is considered for production. Before injection molding of the cage, it is needed to evaluate process conditions and properties of the final product. Variables affecting the shrinkage of the cage are considered, e.g., injection time, packing pressure, mold temperature, and melt temperature. By using the numerical simula-tion program, MOLDFLOW, several cases are studied. Data files obtained by MOLDFLOW analysis are used for stress anal-ysis with ABAQUS, and shrinkage and residual stress fields are predicted. With these results, optimum process conditions are determined.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.419-427
• /
• 2011

Simulation technique for the fish behavior was applied to estimate fish school movement in the cage net. Individual-based fish behavior model (Huth and Wessel, 1991) was evaluated in a free area to understand the characteristics for the model, and the movement in the cage net was simulated by defining the fish reaction against the displacement of cage net. As a result, the distance to the net was not considerably changed and the space among fishes in cage net was slightly decreased by reducing the net space. Swimming area was, however, significantly affected by changing the net space and the relationship between swimming area and net displacement was theoretically estimated as y=-0.21x+1.02 ($R^2$=0.96). these results leads the conclusion that individual-based model was appropriated to describe the fish school reaction in the cage net and be able to use for evaluating the influence on cultured fish.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1024-1029
• /
• 2017

A novel analytic solution has been derived for the bird-cage receiver coil of a magnetic resonance imaging (MRI) system, which is widely used in 3-dimensional medical imaging, by transforming the coil into an equivalent circuit model by using a transmission matrix-based circuit analysis. The bird-cage coil composed of N legs is divided into a cell for which input impedance is to be analyzed and the remaining N-1 cells, and then a transmission matrix corresponding to the N-1 cells is converted into a circuit to transform the 3-dimensional bird-cage coil into the 2-dimensional equivalent circuit model, which is suitable to derive the analytic solution for the input impedance. The proposed method derives directly the analytic solution for the input impedance at an arbitrary point of the coil unlike the conventional analytic solution of a bird-cage coil, so that it can be used not only for resonance frequency calculations but also for various coil characteristics analyses. Since the analytic solution agreed well with the results of computational simulations, it can be useful for the impedance matching of a coil and the analysis and the design of a multi-tune bird-cage coil.