• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1121-1124
• /
• 2002

In this paper, an IC realization of a cell-network type SC DC-DC converter is reported. To achieve small and low-cost realization, the converter is designed by using a 1.2 $\mu\textrm{m}$ CMOS technology. The CMOS implemented converter will be useful as a building block of various mobile equipments since step-up and step-down voltages can be provided at one time. Concerning the proposed DC-DC converter, SPICE simulatiorls are performed to investigate the characteristics of the circuit. The SPICE simulations show that, the efficiency of the simulated circuit is more than 95 %. From the layout design using a CAD tool, MAGIC, the VLSI chip is fabricated in the chip fabrication program of VLSI Design and Education Center(VDEC), the University of Tokyo with the collaboration by On-Semiconductor. The proposed circuit is integrable by a standard 1.2 $\mu\textrm{m}$ CMOS technology.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.399-404
• /
• 2001

In CNC machining, a 3D(3-dimension) linear segment and a 2D(2-dimension) circular arc are general forms given by CAD/CAM system. Generally, the 2D circular arc machining is processed using dividing into some linear segments. A 3D circular arc also don't exist in the standard form of NC data. This paper present a algorithm and method for real-time machining of a circular arc(not only the 2D one, but also the 3D one). The 3D circular arc machining is based on the 2D circular arc machining. It only needs making a new coordinate system, converting given 3D points(a start point, a end point, and a center point of a 3D circular arc) into points of the new coordinate system, and processing a inverse transformation about a interpolated point. The proposed algorithm was implemented and simulated on PC system. It was confirmed to give a gcod result.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.217-224
• /
• 2003

ISO 14649 is a new interface (or language) standard for the CAD-CAM -CNC chain, currently under establishment by ISO TC184 SCI and SC4 . Upon completion, it will replace ISO 6983, so called M amp; G codes used for CNC since 1950' s. As the new language is being established, a new CNC controller called STEP-CNC (STEP­compliant CNC), capable of carrying out various intelligent tasks using the new language as an input, receives worldwide attention. In this paper, we present a distributed architecture for STEP-NC system based on the generic paradigm of STEP-NC. The STEP-NC system is consisted of 3 sub-systems: 1) CGS (Code Generation System), 2) CES (Code Edit System), and 3) ACS (Autonomous Control System). Also presented in this paper is algorithm for delta volume decomposition, a crucial algorithm for developing CGS. First method is based on the cutting tool and the second method is based on the turning features commonly used in the shop floor. An illustrative example is given to compare the two methods, and to illustrate usage scenario of the delta volume in the turning STEP- NC system under development.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.85-95
• /
• 2003

During the design of dies and molds, the cavity of the object is obtained by subtracting it from a surrounding rectangular block. This box is subsequently split into two halves by the parting surface. Similar problems also occur in some RP processes such as LOM, SGC, SLS and 3DP where the machine produces a block inside which the prototype is buried. Determining the orientation of the object inside the box and the corresponding parting surface taking appropriate constraints into account have been addressed by several researchers. However, given the parting surface, the problem of splitting the box development of a software package called OptiLOM (now a module of an RP software Magics 8.0), the authors realized non-triviality of this problem since the loop can spread over as many as 5 faces of the box. In this paper, the authors have tried to bring out the importance of this problem and have presented their algorithm to solve it.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.109-113
• /
• 2020

A power device is a component used as a switch or rectifier in power electronics to control high voltages. Consequently, power devices are used to improve the efficiency of electric-vehicle (EV) chargers, new energy generators, welders, and switched-mode power supplies (SMPS). Power device designs, which require high voltage, high efficiency, and high reliability, are typically based on MOSFET (metal-oxide-semiconductor field-effect transistor) and IGBT (insulated-gate bipolar transistor) structures. As a unipolar device, a MOSFET has the advantage of relatively fast switching and low tail current at turn-off compared to IGBT-based devices, which are built on bipolar structures. A superjunction structure adds a p-base region to allow a higher yield voltage due to lower R_DS (on) and field dispersion than previous p-base components, significantly reducing the total gate charge. To verify the basic characteristics of the superjunction, we worked with a planar type MOSFET and Synopsys' process simulation T-CAD tool. A basic structure of the superjunction MOSFET was produced and its changing electrical characteristics, tested under a number of environmental variables, were analyzed.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.48-54
• /
• 2004

This paper describes the development of automatic shape design program for spur gear. It produces automatically third-dimensional surface and solid model used in CAD/CAM system with inputting simple measurements. This program can maximize user's convenience and get surface and solid model quickly as accepting GUI(graphic user interface). Automatic shape design program for spur gear was developed by Visual LISP, a developer program. Besides, a geometrical method and a mathematical algerian are used in this program. Use frequency of a fine spur gear is on the increase recently and manufacture process of this gear is heat treatment after press processing with molding. In this press processing, the upper punch portion of a fine spur gear shape is drafted by CAM. Therefore, estimated that surface and solid model of spur gear used to CAM are needed in this research. In this research, after 2 ㎜ gear was modeled by auto shape design program, the upper punch portion of a fine spur gear was manufactured as giving third-dimensional model to CAM software and then, displayed the result as applying to press process.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.391-396
• /
• 2000

Today most companies are designing their automobile shapes by using 3 dimensional CAD software, CATIA. And they used to design 2 dimensional press dies to do some elastic work on their products, but they are currently trying to make use of dimensional software, Pro-Engineer. In this case, they have to change the 3 dimensional product design data to the proper format data for the following process. This paper will show the data loss and the deformation during data transfer between CATIA and Pro-Engineer, and then suggest a solution for these problems. Product's surface will be automatically placed by automatic press tipping angle setting in CATIA to prevent the product from being stuck in the press die. The 2 dimensional section view which is based on the tipping angle setting is created by Z-map. And, to remove the data loss and the data deformation in pro-Engineer, the product surface are delivered to the next process after it is changed to the 2 dimensional Z-map curves in CATIA. finally, this paper suggests an algorithm to develop the automatic design program for the press layout which regenerates product shape surface from the previous process.

• 한국CDE학회논문집
• /
• 제4권4호
• /
• pp.339-349
• /
• 1999

The punose of this paper is to introduce the comprehensive CAM system (called PosCAM) supporting various function requested from shop floor operators. PosCAM is comported of two subsystems (PosCAM I and PosCAM II) which are designed to make up for the contemporary CAD/CAM systems. PosCAM I is mainly for : a) verifying the part programs written in both custom macros and standard G-codes, b) enhancing machining productivity and quality with built-in cutting conditions and feedrate optimization algorithm. PosCAM II is for : a) efficiently managing the numerous part programs and tool data stored in CNC memory, and b) integratively controlling and monitoring various CNCs from the control center through RS-422 with DNC 2 protocol. The developed systems have been tested via various experiments, and can be Applied for the industrial CNC machine shop as a means for enhancing productivity. The PosCAM system has been implemented and successfully used in the Machine Shop Department of PosCAM since march 1998.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.38-45
• /
• 1993

본 연구에서는 선반작업에서의 피삭체의 형상을 특징형상(feature)단위로 정 의하였고, 이 특징형상을 이용하여 형상정의를 수행한 후 가공순서 및 가공조건을 대 화형식으로 입력하면 공구위치 데이터(CL data)를 자동으로 산출하고 이를 기계제어데 이터(MC data)로 변화시켜 주는 NC선반가공 프로그래밍시스템 FeaTURN (Feature-based TURNing system)을 개발하였다.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.199-205
• /
• 2001

Burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, burr types are classified and data bases are developed to predict burr formation result. From the CAD file for work geometry and the NC data for tool path, the exit angles are calculated at every edges. This program predicts the burr geometry at exit edges using the prediction algorithm and data bases which are developed experimentally. Simulation results on deformation strain and temperature are also available in specific 2-dimensional cutting conditions. Also algorithm which can determine the exit angle is proposed.