• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.1-9
• /
• 2002

Reverse engineering is an emerging technology to obtain CAD models from existing physical parts in the case that CAD models are not available or paras are changed an(1 modified so that new CAD models for final parts are necessary. Reverse engineering helps designers to quickly generate computer interpretable data from existing Physical objects So it is applying for field of Rapid Prototyping NC Processing CAE, Inspection and so on. The objective of this study is to develop the software that deals with unorganized point data and quickly obtains CAD model. In this paper, several models such as human\`s bone, car, are experimented by the proposed methods.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.83-91
• /
• 1999

In this paper, we suggest a virtual machining system that can simulate cutting forces of ball end milling at the stage of part design. Cutting forces, here, are estimated from the machanistic model that uses the concept of specific cutting farce coefficient. To this end, we need undeformed chip thickness which is used for calculating chip load. It is derived from the Z-map data of a CAD model. That is, chip load is the height difference between the cutting tool and the workpiece at an arbitrary position. The tool contact point is referred from the cutter location data. On the other hand, the workpiece height is acquired from the Z-map model of a CAD data. From the experimental verification, we can simulate machining process effectively to the slot and the side cutting of ball end mill.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.112-120
• /
• 1992

The use of Pre-processor for building structural analysis used to rely upon filling up fixed format data, which was ineffective and error-prone. This research attempts to integrate structural analysis system with DBMS and CAD system in order to make it easy to exchange data between pre-process, analysis, and post-process stages. Automatic generation of database from pre-process stage allows easy preparation of main input data for other structural analysis programs. CAD system with some sub-programs written in LISP and C works as a graphic user interface. This approach gives an easy, effective and error-free way of inputing data for structural analysis.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.422-428
• /
• 2006

In this paper, an NC data optimization approach for enhancing 5-axis machining speed is presented. It is usual to use expensive commercial CAD/CAM programs for NC data of 5-axis machining, since it needs very large calculations for optimal tool positioning and orientation, tool path planning, and collision-free tool path generation. Since commercial CAD/CAM systems have similar functions and efficiency based on common algorithms of reliable theories, they do not have their own unique features for machining speed and efficiency. In other words, most commercial CAD/CAM systems consider only the characteristics of part geometry to be machined, which means that they generate almost the same NC data if the part to be machined is the same, even though different machines are used for the pin. A new approach is proposed for optimizing NC data of 5-axis machining, which is based on the characteristics of the machine to be operated. As a result, the speed of 5-axis machining can increase without losing machining accuracy and surface quality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.906-909
• /
• 2003

This paper proposes an algorithm of CAD data extraction for the computer controlled making system. In general logo is directly designed at the marking controller, but that is not an effective method because of the very limited working area. In this paper, for the data extraction we used a general PC and Auto CAD for logo design, and developed the software with GUI(Graphic User Interface) method. Then the data is transferred to the marking controller for marking on the object. With experimental result we showed the proposed algorithm to be very effective in the computer controlled marking system.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.138-145
• /
• 2009

Custom medical treatment is being widely adapted to lots of medical applications. A technology for 3D modeling is strongly required to fabricate medical implants for individual patient. Needs on true 3D CAD data of a patient is strongly required for tissue engineering and human body simulations. Medical imaging devices show human inner section and 3D volume rendering images of human organs. CT or MRI is one of the popular imaging devices for that use. However, those image data is not sufficient to use for medical fabrication or simulation. This paper mainly deals how to generate 3D geometry data from those medical images. A new image processing technology is introduced to reconstruct 3D geometry of a human body vacancy from the medical images. Then a surface geometry data is reconstructed by using Marching cube algorithm. Resulting CAD data is a custom 3D geometry data of human vacancy. This paper introduces a novel 3D reconstruction process and shows some typical examples with implemented software.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.209-216
• /
• 1997

A feature is well known as a medium to integrate CAD, CAPP and CAM systems. For a part drawing including both simple geometry and compound geometry, a process plan such as the selection of process, machine tool, cutting tool etc. normally needs simple geometry data and non-geometry data of the feature as the input. However, a extended process plan such as the generation of process sequence, operation sequence, jig & fixture, NC program etc. necessarily needs the compound geometry data as well as the simple geometry data and non-geometry data. In this paper, we propose a feature data model according to the result of analyzing necessary data, including the compound geometry data, the simple geometry data and the non-geometry data. Also, an example of the feature data model in milling process planning is described.

• 한국디지털건축인테리어학회논문집
• /
• 제1권1호
• /
• pp.24-30
• /
• 2001

This study conducts a questionnaire with undergraduate students in the Dept. of Architecture who will lead the architectural field in future, examines environment and perception of CAD in their home and universities and aims at supplying the data required for setting CAD educational index and building its use environment, and it could obtain the following results. Individual CAD environment of undergraduate students in the Dept. of Architecture reach a considerable level in hardware part, but they don't have the same level in software part as the hardware and use illegal copy programs. It is shown that they spend their time in using CAD for five to eight hours a week and its main purposes are to perform a project related to architectural design or make report requiring drawing. Major places using CAD are CAD room in university or public PC room equipped with CAD compared to their own houses and most of them have a negative recognition of the convenience of its use. Their satisfaction with CAD use is considerably high and when they submitted their assignments of architectural design project by means of CAD, they had a positive evaluation from their professors and they have such hopes that 'Korean Support Strengthening', 'lowering price through version supply for students' and 'diversification of design symbol' in CAD S/W, and especially, most of respondents have an intention to purchase the original goods when version only for students will be marketed in future. Accordingly, for a qualitative improvement of CAD environment for undergraduate students in the Dept. of Architecture, universities must be equipped with the various types of CAD S/W and Applications and students' opportunity to access them should be increased. In addition, a method which can enhance using convenience of CAD room and PC room is required and CAD related S/W developers must market the version for students which consider the reality of undergraduates in Korea properly with an appropriate price level in order to settle a sound S/W culture.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.290-295
• /
• 1989

This paper proposes a Expert CAPP System for integrating CAD/CAM of rotational work-part by rule based approach. The CAD/CAPP integration is performed by the recognition of machined features from the 2-D CAD data (IGES) file. Selecting functions of the process planning are performed in modularized rule base by forward chaining inference, and operation sequences are determined by means of heuristic search algorithm. For CAPP/CAM integration, post-processor generates NC code from route sheet file. This system coded in OPS5 and C language on PC/AT, and EMCO CNC lathe interfaced with PC through DNC and RS-232C.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.393-398
• /
• 2001

This paper aims to work process of connecting rod die using CAD/CAM/CNC systems. CAD/CAM/CNC systems are consist of CAD(MDT4.0), CAM(Z-MASTER) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for data network.