• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.141-148
• /
• 1997

Continuous development of Personal Computer(PC) combined with the decrease of price and the expansion of operating system in PC like Windows 95, and Windows N/T makes it possible for the user to consider PC-bas-ed Automated Happing/Facilities Management (AM/FM) system. Therefore, the purpose of this study is to establish a PC-based data automation system of pipe infrastructures-water, sewer, and drainage-and road in Korea Land Corporation. In order to achieve this goal, relevant literature survey was done first. Secondly, the study site was determined by discussion with Korea Land Institute. Thirdly, PC-based CAD software for AM/FM in the world market were surveyed, and AutoCAD Map was selected because KLC had been using hundreds of AutoCAD copies already. After that user needs assessment was done to visit on-site office, local branch office, and the corresponding city office for the system design and database design. After the graphic data were digitized and the attribute data were entered into the batabase, the data automation system was established, and tested for application. Finally, the guidelines and problems for PC-based data automation in AM/FM was discussed.

• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.12-17
• /
• 2015

The purpose of this study was to evaluate the marginal and internal gap of metal coping fabricated using additive manufacturing (AM) group and subtractive manufacturing (SM) group by dental computer-aided design (CAD)/computer-aided manufacturing (CAM) systems. Twenty same cases of stone models of abutment teeth 16 by the universal numbering system were manufactured and scanned. Ten metal copings of control group were fabricated using SM and ten metal coping of experimental group were fabricated using AM. Marginal and internal gap of copings were measured using the silicone replica technique and digital microscope (${\times}140$). The data were analyzed using IBM SPSS 21.0 Statistical Software for independent samples t-test (${\alpha}=0.05$). Mean${\pm}$ standard deviation (SD) of marginal and internal gap total size of SM group was $101.00{\pm}40.33{\mu}m$ of AM group was $83.61{\pm}40.37{\mu}m$. Mean${\pm}$SD of marginal and internal gap total size of SM group was significantly greater than that of AM group (p<0.05). This study showed that AM metal copings had a better marginal and internal gap than SM metal copings.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.347-353
• /
• 2018

PURPOSE. The purpose of this study was to evaluate the marginal discrepancy of heat-pressed ceramic veneers manufactured using a CAD/CAM system. MATERIALS AND METHODS. The ceramic veneers for the abutment of a maxillary left central incisor were designed using a CAD/CAM software program. Ten veneers using a microstereolithography apparatus (AM group), ten veneers using a five-axis milling machine (SM group), and ten veneers using a traditional free-hand wax technique (TW group) were prepared according to the respective manufacturing method. The ceramic veneers were also fabricated using a heat-press technique, and a silicone replica was used to measure their marginal discrepancy. The marginal discrepancies were measured using a digital microscope (${\times}160$ magnification). The data were analyzed using a nonparametric Kruskal-Wallis H test. Finally, post-hoc comparisons were conducted using Bonferroni-corrected Mann-Whitney U tests (${\alpha}=.05$). RESULTS. The $mean{\pm}SD$ of the total marginal discrepancy was $99.68{\pm}28.01{\mu}m$ for the AM group, $76.60{\pm}28.76{\mu}m$ for the SM group, and $83.08{\pm}39.74{\mu}m$ for the TW group. There were significant differences in the total marginal discrepancies of the ceramic veneers (P<.05). CONCLUSION. The SM group showed a better fit than the AM and TW groups. However, all values were within the clinical tolerance. Therefore, CAD/CAM manufacturing methods can replace the traditional free-hand wax technique.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.49-62
• /
• 1993

The purpose of this research was to utilize of Pattern Design System(P.D.S) by using AM-300 The conclusion were like these : 1. A coat of basic pattern was selected by design sketch. 2. The basic pattern was input into computer by digitizing. 3. The basic pattern was change into designed shape by using various skills. This system were enabled to draw straight lines, curves, delete lines, sections of lines, extend lines, cut pattern into sections, measure line or section reproduce whole pattern shape of section, rotate and mirror pattern and complete patterns. 4. Automatic grading of finished master pattern have been developed by creation and modification of grading rules of basic pattern. 5. Production pattern added seam allowance, not-ches was generated by P.D.S menu option. 6. Finished pattern design was plotted out 100% and 20% size by AM-300 Plotter. This results will be the basic materials to develop the CAD SYSTEM if some problems were improve. Furthermore, the utilization of P.D.S is expected to be developing in pattern making process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.799-809
• /
• 2000

This study was designed for automated pattern drawing and grading a man's Durumagi, Korean traditional coat in order to reestablished and grade the pattern by Apparel CAD SYSTEM. For the study, AM-250 systems of Gerber as the computer and Macro program as the automated drawing were used. Also, PDS(Pattern Design System) was used for the grading of the original Durumagi pattern. Results were followings; First, the size data that could be standardized by reestablishing the pattern of a man's Durumagi by each size was presented. Second, The pattern was developed by each size. Third, new design was propose for mass production with the traditional design of the DURUMAGI Fourth, The time for making DURUMAGI pattern and the cost through the automated drawings by using the Macro program were reduced. Moreover, was presented the basic data for a ready to made garment like the Western garment. Five, A man's DURUMAGI by CAD System was graded that could be applied to ready to made Hanbok

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.335-336
• /
• 2007

A new current-programmed pixel circuit for activematrix organic light emitting diodes (AMOLEDs), based on Organic TFTs (OTFTs), is proposed and verified by SPICE simulations. The simulation results show that the proposed pixel circuit, which is a current mirror structure consisting of five Organic TFTs and one capacitor, has reliable linear characteristics between input current and output OLED current. Also, the threshold voltage degradation of Organic TFTs due to long time operation stress is well compensated to reliable values.

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.241-253
• /
• 2013

A Shipbuilding design program used in the shipbuilding industry tends to be shifted from the TRIBON software to the AM(AVEVA MARINE) software these days. Many large domestic shipbuilding companies have been using the AM instead of the TRIBON. New design software requires education programs for the necessary personnel. However the education programs for the AM are largely based on offline education. They suffer from constraints in space and time, and from high costs. This paper describes a development of online contents for the AM software that are focused for cyber education. It covers the applied process and the organization of the contents. The details of the development decisions including the security issue for the contents are described also.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.151-163
• /
• 2004

This study aims to develop a standard protocol by which users can exchange data information efficiently between KOSDIC and GIS. The ultimate goal from this study is to propose a data exchange format using KOSIC. The background of this study is that GIS industry sector is vigorously developing linked to spatial information construction such as UIS, LIS, EIS, AM/FM through supporting by regional government institution. According to do, the format of data transformation becomes major issue. GIS data can easily transfer to CAD version but when CAD data convert to GIS format (DWG->DXF->SHP) cannot get high success rate due to errors and problems. In addition, CAD data feature is made from oriental structure which is made of point and line faeture so that GIS system is impossible to data transformation. In the reason, the biggest problem is discordance of symbolization in integration and standard of data format. By investigation the usability of this study, conclusion are drawn efficient alternative plan in data transformation. Though this wort we will be able to provide a better transformation of data conversion between CAD format and GIS format. Accordingly, it is of important to enrich the integrated construction information infrastructure, which accommodates ever-changing constructions environment.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_1
• /
• pp.107-113
• /
• 2020

Additive manufacturing(AM) can create complex shapes directly in 3D CAD models with internal geometry compared to conventional subtraction manufacturing. AM technology has the advantage of adopting various materials as well as the reduction of material. However, the high cost of AM is still a significant barrier preventing the wider adoption of AM in industries. This paper analyzes the technical application cases for solving these entry barriers and proposes a bi-metal 3D printing technology as an anticipated application to overcome the difficulty. The paper investigates the complications for current 3D metal printing technology to conduct bi-metal 3D printing and addresses ongoing solution research based on laser technology.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.773-780
• /
• 2015

Traditionally, additive manufacturing (AM) technology has been used to fabricate prototypes in the early development phase of a product. This technology is being applied to release manufacturing of a product because of its low cost and fast fabrication. AM technology is a process of joining materials to fabricate a product from the 3D CAD data in a layer-by-layer manner. The orientation of a layer during manufacturing can affect the mechanical properties of the product because of its anisotropy. In this paper, tensile testing of polymer-based specimens were built with a typical AM process (FDM, PolyJet and SLA) to study the mechanical properties of the AM materials. The ASTM D 638 tensile testing standard was followed for building the specimens. The mechanical properties of the specimens were determined on the basis of stress-strain curves formed by tensile tests. In addition, the fracture surfaces of the specimens were observed by SEM to analyze the results.