• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.638-647
• /
• 1993

현재 미국에서 컴퓨터 디자인(Computer aided design)은 의류산업과 의류학 교육에 중요한 역할을 하고 있다. 그러나 한국내 의류학관련 학과에서의 CAD의 도입은 아직 초기 단계에 불과하다. 이에 본 연구는 미국내 대학을 중심으로 의류학관련 학과에서의 전반적인 CAD 교육 경향을 조사 분석하여 실질적인 자료와 국내 의류학관련 학과의 CAD 교육의 나아갈 방향을 제시하는데 그 목적이 있다. 1993년 5월, 총 19문항의 질문지가 124개 대학 의류학관련 학과에 우편으로 배포되었으며 71부가 회수되어 57%의 회수율을 나타내었다. 그 결과는 다음과 같다. 조사 대상(71개 학교)중 56%가 CAD를 커리큘럼에 포함시켰다. 특히 의상디자인 전공을 가진 학과의 79%가 CAD를 도입하여, 의상디자인 전공이 없는 학과(28%가 CAD를 도입)보다 그 비율이 훨씬 높았다. 의류학 교육에서 CAD의 도입은 1988년 이후 급격한 증가 추세를 보였으며, 대부분의 강의는 의류학분야 교수진에 의해, 의류학과 시설물내에서 이루어졌다. CAD를 독립된 과목으로 강의하는 경우 대부분 필수과목으로서 한 학기 코오스가 많았으며 3학년부터 시작되었다. CAD를 다른 의류학 과목에 포함시켜 일부분으로 강의할 경우 영역 별로는 복식 의장학 분야의 과목에, 시간 별로는 한 학기 중 "몇 주" 정도로 가르치는 경우가 가장 많았다. 전체 CAD 강의에서 다루는 주제로는 패턴 메이킹이 가장 많이 차지하였으며 그 다음에는 패턴 그레이딩, 마커 메이킹, 직물/패턴 디자인, 패션 일러스트레이션, 의상디자인 순이며 스토어 레이아웃 상품전시 및 디스플레이 계획이 가장 적었다. 본 연구 결과는 현재 CAD를 강의하고 있거나 앞으로 CAD를 커리큘럼에 도입하려는 한국 의류학 분야 교육자에게 유용한 정보를 제공할 수 있을 것으로 기대된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.259-266
• /
• 2016

In edentulous mandible, implant supported overdenture was considered as a first treatment option. Konus type attachment supplies rigid support and cross arch stabilization so that more favorable force transmission and distribution can be attained. In the dentistry, computer aided design-computer aided manufacturing (CAD-CAM) system makes it possible to fabricate restorations with high precision and effectiveness. Recently, Palladium-silver (Pd-Ag) alloy which is millable has been developed. This article presents that application of CAD-CAM Konus type attachment can be provide satisfactory stability and function on four-implant supported mandibular overdenture.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.140-149
• /
• 2020

PURPOSE. This study evaluated the color stabilities of two computer-aided design and computer-aided manufacturing (CAD/CAM) blocks and a nanofill composite resin and the microtensile bond strength (µTBS) between the materials. MATERIALS AND METHODS. Twelve specimens of 4 mm height were prepared for both Lava Ultimate (L) and Vita Enamic (E) CAD/CAM blocks. Half of the specimens were thermocycled (10,000 cycle, 5° to 55℃) for each material. Both thermocycled and non-thermocycled specimens were surface treated with one of the three different methods (Er,Cr:YSGG laser, bur, or control). For each surface treatment group, one of the thermocycled and one of non-thermocycled specimens were restored using silane (Ceramic Primer II), universal adhesive (Single Bond Universal), and nanofill composite resin of 4-mm height (Filtek Ultimate). The other specimens were restored with the same procedure without using silane. For each group, 1 × 1 × 8 mm bar specimens were prepared using a microcutting device. Bar specimens were thermocycled (10,000 cycle, 5° to 55℃) and microtensile tests were performed. Staining of the materials in coffee solution was also compared using a spectrophotometer. Data were analyzed using one-way ANOVA, t-test and post-hoc Scheffe tests. RESULTS. µTBS were found similar between the thermocycled and non-thermocycled groups (P>.05). The highest µTBS (20.818 MPa) was found in the non-thermocycled, bur-ground, silane-applied E group. Silane increased µTBS at some E groups (P<.05). Composite resin specimens showed more staining than CAD/CAM blocks (P<.05). CONCLUSION. CAD/CAM blocks can be repaired with composite resins after proper surface treatments. Using silane is recommended in repair process. Color differences may be shown between CAD/CAM blocks and the nanofill composite after a certain time period.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.211-217
• /
• 2018

PURPOSE. To evaluate the effect of prolonged sandblasting on the bond durability of dual-cure adhesive resin cement to computer-aided design and computer-aided manufacturing (CAD/CAM) restoratives. MATERIALS AND METHODS. Nano-ceramic LAVA Ultimate and hybrid-ceramic VITA Enamic CAD/CAM blocks were used for this study. Each CAD/CAM block was sectioned into slabs of 4-mm thickness for the microtensile test (${\mu}TBS$) test and 2-mm thickness for the surface roughness test. Three groups were created according to the sandblasting protocols; group 1: specimens were sandblasted for 15 seconds, group 2: specimens were sandblasted for 30 seconds, and group 3: specimens were sandblasted for 60 seconds. After sandblasting, all specimens were luted using RelyX Ultimate Clicker. Half the specimens were subjected to ${\mu}TBS$ tests at 24 hours, and the other half were subjected to tests after 5000 thermocycles. Additionally, a total of 96 CAD/CAM block sections were prepared for surface roughness tests and scanning electron microscopy (SEM) evaluations. The Mann-Whitney U test, Kruskal-Wallis one-way analysis of variance, and Dunn's post hoc test were used to compare continuous variables among the groups. RESULTS. At baseline, group 1, group 2, and group 3 exhibited statistically similar ${\mu}TBS$ results for LAVA. However, group 3 had significantly lower ${\mu}TBS$ values than groups 1 and 2 for VITA. After 5000 thermocycles, ${\mu}TBS$ values significantly decreased for each block (P<.05). CONCLUSION. It is important to perform controlled sandblasting because it may affect bond strength results. Sixty seconds of sandblasting disturbs the initial ${\mu}TBS$ values and the stability of adhesion of CAD/CAM restoratives to dual-cure adhesive resin cement for VITA Enamic.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.490-494
• /
• 2019

Abutment teeth supporting removable partial denture could be faced a number of problems including development of dental caries. If the existing removable partial denture is in clinically acceptable state and the patient does not want to replace the existing removable partial denture, then a new prosthesis for abutment teeth need to be made. The procedure of fabricating a new prosthesis of abutment teeth for existing removable partial denture is complicate and technically challenging. To fabricate the abutment crown, the original cast of patient obtained before any complication to the abutment teeth is required. The original cast should also contain teeth other than the abutment teeth as a reference point. Once the cast is prepared, CAD/CAM could be used to produce retrofitting prosthesis effortlessly and efficiently. This clinical report presents fabricating a crown to fit existing removable partial denture using CAD/CAM for a patient with post and core failure and dislodged prosthesis. The prosthesis had high stability with minimum adjustment yielding satisfying result.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.158-167
• /
• 2023

As digital technology has advanced in the field of dentistry, the use of computer-aided design/computer-aided manufacturing (CAD/CAM) has brought changes to the stages of dental treatment. The use of CAD/CAM technology in dental restoration offers clinical efficiency and convenience by reducing production time and appointment intervals, while also simplifying the fabrication process to reduce errors. In this case, digital replication and printing of temporary teeth were used to aid a patient with complex medical histories and physical disabilities. The final impression obtained with silicone impression material included information on the vertical dimension, centric relation, and the angle and length of the anterior teeth, which shortened the production time and appointment intervals and increased patient satisfaction. The final restoration was fabricated using milling and monolithic disc techniques, demonstrating appropriate stability, retention, and support, resulting in functional and aesthetic satisfaction.

• Restorative Dentistry and Endodontics
• /
• v.44 no.3
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.269-272
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse cam. The main objection is the development of computer-aided design (CAD) program for simulating the motion of the cam-feeding mechanism using computer-graphics. A computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is independent of computer hardware used. The program is also interactive using a menu-selection technique. As the second part of the paper for the motion simulation of the cam-feeding system, this paper discusses the state-of-art for CAD. The first part of the paper presents the algorithm to simulate the notion of the cam-feeding mechanism.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.426-432
• /
• 2012

For students majoring in Architecture or Architectural Engineering, describing a building with pictures and signs is equal to expressing his/her opinion with sentences and presentations. CAD (computer aided design) is a method of describing buildings, and is used practically in architecture-related companies. Many universities prescribe CAD instruction as a compulsory subject, and ABEEK (Accreditation Board for Engineering Education of Korea) requires an introduction to CAD as a basic subject for visual expression. The Architectural Drawing and CAD class in the department of Architectural Engineering of J University is a 2-credit course, with 4 hours of lectures per week. Relative to other subjects, this is insufficient for practical study. Thus, to make up for this insufficient time, the class has adopted a Blended learning system that mixes off-line and on-line classes. The objective of this research is to introduce Blended learning, and to give a case study of the CAD class using Blended learning.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.4
• /
• pp.197-199
• /
• 2013

Three-dimensional (3D) computed tomography image models are helpful in reproducing the maxillofacial area; however, they do not necessarily provide an accurate representation of dental occlusion and the state of the teeth. Recent efforts have focused on improvement of dental imaging by replacement of computed tomography with other detailed digital images. Unfortunately, despite the advantages of medical simulation software in dentofacial analysis, diagnosis, and surgical simulation, it lacks adequate registration tools. Following up on our previous report on orthognathic simulation surgery using computer-aided design/computer-aided manufacturing (CAD/CAM) software, we recently used the registration functions of a CAD/CAM platform in conjunction with surgical simulation software. Therefore, we would like to introduce a new technique, which involves use of the registration functions of CAD/CAM software followed by transfer of the images into medical simulation software. This technique may be applicable when using various registration function tools from different software platforms.