• Steel and Composite Structures
• /
• v.5 no.4
• /
• pp.325-340
• /
• 2005

This paper presents a thorough investigation into the structural performance of cold-formed steel column bases using double lipped C sections with bolted moment connections. A total of four column base tests with different connection configurations were carried out, and it was found that section failure under combined bending and shear was always critical. Moreover, the proposed column bases were demonstrated to be structurally efficient attaining moment resistances close to those of the connected sections. In order to examine the structural behaviour of the column base connections, a finite element model was established using shell and spring elements to model the sections and the bolted fastenings respectively. Both material and geometrical non-linearities were incorporated, and comparison between the test and the numerical results was presented in details. The design rules originally developed for bolted moment connections between lapped Z sections were adopted and re-formulated for the design of column base connections after careful calibration against the test data. Comparison on co-existing moments and shear forces at the critical cross-sections of the column bases was fully presented. It was shown that the proposed design and analysis method was structurally adequate to predict the failure loads under combined bending and shear for column bases with similar connection configurations.

• Steel and Composite Structures
• /
• v.5 no.4
• /
• pp.289-304
• /
• 2005

This paper presents a thorough investigation into the structural performance of cold-formed steel column bases using double lipped C sections with bolted moment connections. A total of four column base tests with different connection configurations were carried out, and it was found that section failure under combined bending and shear was always critical. Moreover, the proposed column bases were demonstrated to be structurally efficient attaining moment resistances close to those of the connected sections. In order to examine the structural behaviour of the column base connections, a finite element model was established using shell and spring elements to model the sections and the bolted fastenings respectively. Both material and geometrical non-linearities were incorporated, and comparison between the test and the numerical results was presented in details. The design rules originally developed for bolted moment connections between lapped Z sections were adopted and re-formulated for the design of column base connections after careful calibration against the test data. Comparison on co-existing moments and shear forces at the critical cross-sections of the column bases was fully presented. It was shown that the proposed design and analysis method was structurally adequate to predict the failure loads under combined bending and shear for column bases with similar connection configurations.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.129-133
• /
• 2004

The active compound responsible fer the anti-oxidant activity in Chinese cabbage kimchi were isolated and identified. The dichloromethane fraction of Chinese cabbage kimchi with the greatest anti-oxidant activity was used. Silica gel column chromatography, Sephadex LH-20 column chromatography, TLC, and Sep-pak catridge were used for isolating the active compounds and IR, EI-MS, GC-MS, $^{1}H-NMR$, $^{13}C-NMR$ were used to identify the structure of the isolated compounds. 3-(4'-Hydroxyl-3',5'-dimethoxyphenyl)propionic acid of molecular weight 226, which had 3.4 times greater free radical scavenging activity than Vit. C and significantly greater anti-oxidant activity against LDL oxidation than the control, was obtained, This active principle may be beneficial in preventing hyperlipidemia and artherosclerosis in human.

• Korean journal of food and cookery science
• /
• v.17 no.5
• /
• pp.497-502
• /
• 2001

능이버섯 〔Sarcodon aspratus(Berk.) S.Ito〕으로부터 단백질 가수분해 효소를 추출하여 75%(NH$_4$)$_2$SO$_4$ 염석과 DE52 anion exchange column chromatography 와 sepharyl-S 200 column 및 Mono s column chromatography 에 의해 정제하였는데 조 효소의 특이 활성은 55.2U/mg protein으로 조효소액에 비하여 11.26배 증가하였고 수율은 49.5%로 나타났다. 정제된 효소는 전기영동을 행한 결과 단일 band를 나타내었으며 분자량은 29,300으로 추정되었다. pH의 안정성은 4$^{\circ}C$에서 48시간 보존하였을 때 pH 8.5에서 가장 안정하였고, pH 5.5~10.5까지 높은 활성을 유지하였다. 온도에 대한 안정성은 30분간 보존 한 후 활성을 검토한 결과 단백분해능은 5$0^{\circ}C$까지 비교적 처음활성을 유지하다가 6$0^{\circ}C$에서는 53%정도의 활성이 유지되었으나 그 이상의 온도에서는 급격히 실화하여 7$0^{\circ}C$에서는 완전히 실화하였다. 금속 이온에 의해서는 크게 저해를 받지 않았으나 PMSF 저해제에 대하여 저해되어 본 효소가 serine protease임을 시사하였다.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.187-192
• /
• 2007

A reversed phase HPLC analysis of atorvastatin (AS) standard solution was performed using diclofenac (DF) as internal standard. Column oven temperature, flow rate and the composition of the mobile phase were varied in order to determine a practical system setup using a C18 column and UV detector. Two C18 columns of different length were compared regarding their influence on the AS peak shape. Based on these preliminary experiments a validation study was performed utilizing a C18 column at $62^{\circ}C$ with a mobile phase consisting of sodium phosphate buffer (0.05 M, pH 4.0), methanol and acetonitrile (40:50:10, v/v/v). The detection limit for AS was $0.1{\mu}g/ml$ and inter- and intra-day calibration curves were linear over a concentration range of $0.2-50{\mu}g/ml$. Accuracy and precision were satisfactory in the AS concentration range of $0.5-50{\mu}g/ml$.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.823-826
• /
• 1997

The EtOAc extracts from needles of Pinus densiflora showed antimicrobial activities against bacteria, yeast and fungi. The antimicrobial principle was successively purified by solvent fractionation, silica gel adsorption column chromatography and Sephadex LH-20 column chromatography. The active substance was further purified by HPLC using $C_{18}$ column. The active substance was identified as trans-cinnamic acid by MS, $^{1}H-NMR\;and\;^{13}C-NMR$. The amount of cinnamic acid was $9.27\;{\mu}g$ Per gram of fresh needle of Pinus densiflora.

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.27-32
• /
• 1990

Lipids of Job's tears (Yullmoo) were extracted by the mixture of chloroform: methanol (2:1, v/v) and from these lipids, triglycerides were separated by column chromatography (Sephadex G-25 column) and then confirmed by thin layer chromatography (TLC) and reconfirmed by gas chromatography (GC). The triglycerides were fractionated into 6 groups on the basis of their partition numbers (PN) by reverse phase high performance liquid chromatography (HPLC) on a column Shimpack CLC-ODS using tetrahydrofuran-acetonitril (25:75) mixture as a solvent. Each of these collected fractions gave one to two peaks in the GC chromatograms according to the acyl carbon number (CN) of the triglyceride and fatty acid composition of the triglycerides were also analyzed by GC. From the results, the major triglycerides of Job's tears lipids were estimated to be C18:1 C18:2 C18:2 (OLL, 38.2%), C16:0 C18:2 C18:3 (PLLn, 15.7%), C18:1 C18:1 C18:2 (OOL, 12.6%).

• Interaction and multiscale mechanics
• /
• v.4 no.4
• /
• pp.321-336
• /
• 2011

This paper presents the results of static vertical load tests carried out on a model building frame supported by pile groups embedded in cohesionless soil (sand). The effect of soil interaction on displacements and rotation at the column base and also the shears and bending moments in the columns of the building frame were investigated. The experimental results have been compared with those obtained from the finite element analysis and conventional method of analysis. Soil nonlinearity in the lateral direction is characterized by the p-y curves and in the axial direction by nonlinear vertical springs along the length of the piles (${\tau}-z$ curves) at their tips (Q-z curves). The results reveal that the conventional method gives the shear force in the column by about 40-60%, the bending moment at the column top about 20-30% and at the column base about 75-100% more than those from the experimental results. The response of the frame from the experimental results is in good agreement with that obtained by the nonlinear finite element analysis.

• Microbiology and Biotechnology Letters
• /
• v.32 no.3
• /
• pp.265-270
• /
• 2004

To select a promising technologies for removal of odorous gases emitted from a wastewater pump station, four methods such as activated carbon (A/C) adsorption, chemical absorption (acid and alkali scrubber), and two biofilters (polyurethane (PU) and worm cast) were investigated. The average odor removal efficiencies in the PU biofilter and A/C column was over 98%, but in a worm cast biofilter and chemical absorption were below 60-80%. The removal efficiency of PU biofilter was very stable (about 98-99%) in the range of retention times of 4-36s, and a maximum elimination capacity was $1.6${\times}$10^{ 7}$ $OUm^{-3}$$h^{-1}$ Deodorization costs for an activated carbon adsorption and a biofiltration method were investigated. With increasing odor intensity, the operating cost of the A/C column increased linearly, but the operating cost of the biofilteration increased slightly. The capital cost in a biofilter is about two times higher than that in an A/C column, but the operating cost is very lower than that of in A/C column. In conclusion, the biofiltration was evaluated one of the most promising technologies to control odor in a wastewater pump station.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.339-347
• /
• 1994

A multicolumn system consisted of two valve(10-port and 6-port valve)-three column (28% DC 200, SP 1700 and Chromosorb 102 column) was developed. Nine natural gas components composed of $N_2$, $CH_4$, $CO_2$, $C_2H_6$, $C_3H_8$, $i-C_4H_{10}$, $n-C_4H_{10}$, $i-C_5H_{12}$ 및 $n-C_5H_{12}$ completed all the baseline separation within 18 minutes. The accuracy and the precision of this system was tested. The retention times and the peak areas were determined with a repeatability between 0.02 and 0.16%, and less than 1%, respectively. Calibration curves for natural-gas components were plotted by the partial pressure injection method of pure gases, and good linear relationships for each component were presented. By using these calibration curves the accuracy of the multicolumn system compaired with that of the single column system for a certified standard gas of natural gas. As a result, relative error in the single and the multicolumn system was less than 0.5% and 0.04%, respectively. The result of application of this system in the analysis of importing LNG composition showed that the heating values calculated by the multicolum system were estimated lower compared with those calculated by the single column system and consequently, the importing price of LNG was able to be cut down.