• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.352-358
• /
• 2002

The effects of boron or manganese added as $B_4C$, Mn, $TiB_2$, B on TiC-30vo1.%$Ni_3Al$ cermet sintered at 1380 and $1400^{\circ}C$ for 1 hour, were examined in relation with shrinkage, relative density, microstructure, lattice parameter, hardness and fracture toughness ($K_{IC}$). The results are summarized as follows: 1) The highest shrink-age showed about 30.5% in the specimen added B$_4$C and the maximum relative density was about 99% in the specimen added $TiB_2$; 2) The grains of TiC were grown during sintering and made the surrounding structure by adding boron and manganese. The largest grain size showed about $2.8\mutextrm{m}$ in the specimen with boron sintered at $1400^{\circ}C$;3) The lattice parameter of TiC was about $4.325\AA$ and $Ni_3Al$ about $3.592\AA$ by adding other elements; 4) The highest hardness was about $1100kgf/\textrm{mm}^2$ in the specimen with B4C; 5) The fracture toughness ($K_{IC}$) showed about $15MNm^{-3/2}$ in the specimen added $TiB_2$.

• Bulletin of the Korean Chemical Society
• /
• 제8권3호
• /
• pp.185-189
• /
• 1987

Reactions of $Ir(ClO)_4(CO)(PPh_3)_2$ with dicyano olefins, cis-NCCH = CH$CH_2$$CH_2$CN (cDC1B), trans-NCCH = CH$CH_2$$CH_2$CN (tDC1B), trans-NC$CH_2$CH = CH$CH_2$CN (tDC2B), and NC$CH_2$$CH_2$$CH_2$$CH_2$CN (DCB) produce binuclear dicationic iridium (I) complexes, $[(CO)(PPh_3)_2Ir-NC-A-CN-Ir(PPh_3)_2(CO)](ClO_4)_2$ (NC-A-CN = cDC1B (1a), tDC1B (1b), tDC2B (1c), DCB (1d)). Complexes 1a-1d react with hydrogen to give binuclear dicationic tetrahydrido iridium (Ⅲ ) complexes, $[(CO)(PPh_3)_2(H)_2Ir-NC-A-CN-Ir(H)_2(PPh_3)_2(CO)](ClO_4)_2$ (NC-A-CN = cDC1B (2a), tDC1B (2b), tDC2B (2c), DCB (2d)). Complexes 2a and 2b catalyze the hydrogenation of cDC1B and tDC1B, respectively to give DCB, while the complex 2c is catalytically active for the isomerization of tDC2B to give cDC1B and tDC1B and the hydrogenation of tDC2B to give DCB at $100^{\circ}C$.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.18-23
• /
• 2003

정량의 B$_2$O$_3$/A1/C의 혼합분말을 화학노 대신 고압의 알곤 분위기를 사용하여 SHS 공정으로 B$_4$C-A1$_2$O$_3$ 복합분말을 제조하였다. 2B$_2$O$_3$+4A1+C=B$_4$C-2A1$_2$O$_3$의 반응식에 해당하는 B$_2$O$_3$(-100 메쉬), Al(-200 메쉬), C(-200 메쉬)의 분말을 2시간 건식 볼밀로 혼합한 후, 고온 고압의 SHS 반응기에 넣고 약 10기압의 알곤 분위기에서 점화하여 SHS을 일으켰다. 반응 생성물은 XRD 분석으로 안과 겉이 균일하게 반응이 일어났으며 반응 생성물로 화학노 사용시 동반되는 부산물 AlB$_{12}$C$_2$가 없는 B$_4$C-A1$_2$O$_3$ 복합 분말을 얻었다. 이 복합 분말은 SEM으로 보면 약 0.3~l $mu extrm{m}$ 크기의 결정이 모인 약 60~100$\mu\textrm{m}$ 크기이었다. 그러나 약 15기압을 사용하였을 때는 부분 소결이 일어나 15~25$\mu\textrm{m}$ B$_4$C 분말에 0.1~0.2$\mu\textrm{m}$의 알루미나가 분산되어 있는 고강도의 복합 분말이 생성되었다.

• Molecules and Cells
• /
• 제43권12호
• /
• pp.1023-1034
• /
• 2020

Complement fragment iC3b serves as a major opsonin for facilitating phagocytosis via its interaction with complement receptors CR3 and CR4, also known by their leukocyte integrin family names, αMβ2 and αXβ2, respectively. Although there is general agreement that iC3b binds to the αM and αX I-domains of the respective β2-integrins, much less is known regarding the regions of iC3b contributing to the αX I-domain binding. In this study, using recombinant αX I-domain, as well as recombinant fragments of iC3b as candidate binding partners, we have identified two distinct binding moieties of iC3b for the αX I-domain. They are the C3 convertase-generated N-terminal segment of the C3b α'-chain (α'NT) and the factor I cleavage-generated N-terminal segment in the CUBf region of α-chain. Additionally, we have found that the CUBf segment is a novel binding moiety of iC3b for the αM I-domain. The CUBf segment shows about a 2-fold higher binding activity than the α'NT for αX I-domain. We also have shown the involvement of crucial acidic residues on the iC3b side of the interface and basic residues on the I-domain side.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.609-614
• /
• 1988

This study was carried out to investigate the effects of B4C or Y2O3 additives on the tendency of sintering, $\beta$-SiC synthesis and mineral phase changes by reaction bonding of SiC at 145$0^{\circ}C$. At the sintering temperature of 145$0^{\circ}C$, the additives such as B4C or Y2O3 did not improved porosity and bending strength. Added more than 1.5% of Y2O3, 0.5-0.3% of B4C, the formation of $\beta$-SiC was increased. At higher temperature above 145$0^{\circ}C$, it seems that the bodies added B4C, contained 3C form of SiC were denser than that of Y2O3 added. Because the transition of 3Clongrightarrow4Hlongrightarrow6H promoted sintering.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.224-225
• /
• 2006

The Ethylene polymerization behavior of a series of polymethylene bridged dinuclear CGC $[Zr({\eta}^{5}:{\eta}^{1}-C_{9}H_{5}SiMe_{2}NCMe_{3})Me_{2}]_{2}[(CH_{2})_{n}]\;[_{n}=6(1),\;9(2),\;12(3)]$ in the cocatalytic activation with $Ph_{3}C^{+}B^{-}(C_{6}F_{5})_{4}\;(B_{1})\;or\;Ph_{3}C^{+}(C_{6}F_{5})_{3}B^{-}C_{6}F_{4}B^{-}(C_{6}F_{5})_{3}Ph_{3}C^{+}\;(B_{2})\;or\;B(C_{6}F_{5})_{3}\;(B_{3})$ were investigated to study the nuclearity effects as well as the counteranion effects. The ethylene polymerization and ethylene/1-hexene copolymerization were conducted at $30^{\circ}C$ It was found that both in ethylene polymerization and ethylene/1-hexene copolymerization, activities increased in the order of 1 < 2 < 3, which indicates the presence of longer bridge between two active sites contributes more efficiently to facilitate the polymerization activity.

• 대한화학회지
• /
• 제39권6호
• /
• pp.440-445
• /
• 1995

메탄올 용액에서 Nd(III)과 B15C5(benzo-1,4,7,10,13-pentaoxacyclopentadecane)의 치환체들간의 착물형성에 따른 화학적 조겅비 및 온도변화에 따른 안정도상수, 열역학적 파라메타들을 분광광도법과 전기전도도법을 이용하여 결정하였다. 이때 B15C5의 치환기들은 $CH_3,\;Br\;CHO,\;NO_2$ 및 43,4-(NO_2)_2$이었다. 메탄올 용액에서 Nd(III)과 이들 리간드와의 착물의 조성비는 1:1임을 알 수 있었으며, 안정도상수는 치환기효과에 $B15C5-3,4(NO_2)2 의하여 순으로 증가함을 알 수 있었다. 또한 용매변화에 따른 안정도상수의 순위는 용매 염기도(DN)에 역비례하는데 이는 용매의 염기도, 리간드의 염기도, 금속이온의 용매화 현상 및 착물형성에 따른 엔트로피변화 등으로 설명할 수 있었다.

• 한국식품영양학회지
• /
• 제7권2호
• /
• pp.95-99
• /
• 1994

In order to investigate the fatty acid composition of Korean pumpkins, this study was designed. Three samples of Korean pumpkins, A(yellowish ripe), B(unripe, 30 days old) and C(unripe, 20 days old) were used for fatty acid analysis by gas chromatography. The results were as follows : Pumkin C, B and A showed 10, 12 and 15 kinds of fatty acids, respectively. In case of palmitic acid(C16:0), pumpkin C, B and A showed 22.5%, 22.9% and 26.6%, respectively. In case of u linolenic acid(C18:3), pumpkin C, B and A showed 22.6%, 23.6% and 44.8%, respectively. In case of palmitoleic acid(Cl6:1), pumpkin C. B and A showed 12.4%, 10.1% and 0.5%, respectively. In case of oleic acid(C18:1), pumpkin C. B and A showed 9.2%, 7.7% and 2.8%, respectively, In case of stearic acid(C18:0), pumpkin C, B and A showed B.S%, 3.7% and 3.5%, respectively. The ratio of P/S was 1.4, 1.6 and 1.9 for sample C, B and A, respectively. The ratio of w-3/w-6 was 1.1, 0.9 and 2.6 for sample C, B and A, respectively. Through this study, the ripe pumpkin(sample A) was thought to be good enough in nutritional aspects of fatty acids, particularly a-linoleic acid, Cl8 : 3(u-3) series.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.191-193
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC-39vol.% $TiB_2$ and using 61vol.% SiC-39vol.% $ZrB_2$ powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650^{\circ}C$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the SiC-$TiB_2$, and SiC-$ZrB_2$ composites. The ${\beta}\;{\alpha}$-SiC phase transformation was occurred on the $SiC-TiB_2$, $SiC-ZrB_2$ composites. The relative density, the flexural strength and Young's modulus showed respectively value of 98.57%, 226.06Mpa and $86.37{\times}10^3Mpa$ in SiC-$ZrB_2$ composites.

• Korean Journal of Mathematics
• /
• 제30권3호
• /
• pp.467-474
• /
• 2022

In this article, we consider the integral operator 𝓒^b,c, which is defined as follows: $${\mathcal{C}}^{b,c}(f)(z)={\displaystyle\smashmargin{2}{\int\nolimits_{0}}^z}{\frac{f(w)*F(1,1;c;w)}{w(1-w)^{b+1-c}}}dw,$$ where * denotes the Hadamard/ convolution product of power series, F(a, b; c; z) is the classical hypergeometric function with b, c > 0, b + 1 > c and f(0) = 0. We investigate the boundedness of the 𝓒^b,c operators on Bloch spaces.