• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.789-800
• /
• 2013

$N_2O$ and $CH_4$, Greenhouse gas emission, Forest soil, Closed chamber technique, Soil uptake $N_2O$ and $CH_4$ are important greenhouse gases (GHG) along with $CO_2$ influencing greatly on climate change. Their soil emission rates are highly affected by bio-geo-chemical processes in C and N through the land-atmosphere interface. The forest ecosystems are generally considered to be net emission for $N_2O$; however, net sinks for $CH_4$ by soil uptake. Soil $N_2O$ and $CH_4$ emissions were measured at Mt. Taewha in Gwangju, Kyeonggi, Korea. Closed chamber technique was used for surface gas emissions from forest soil during period from May to October 2012. Gas emission measurement was conducted mostly on daytime (from 09:00 to 18:00 LST) during field experiment period (total 25 days). The gas samples collected from chamber for $N_2O$ and $CH_4$ were analyzed by gas chromatography. Soil parameters were also measured at the sampling plot. GHG averages emissions during the experimental period were $3.11{\pm}16.26{\mu}g m^{-2}hr^{-1}$ for $N_2O$, $-1.36{\pm}11.3{\mu}gm^{-2}hr^{-1}$ for $CH_4$, respectively. The results indicated that forest soil acted as a source of $N_2O$, while it acted like a sink of $CH_4$ on average. On monthly base, means of $N_2O$ and $CH_4$ flux during May (spring) were $8.38{\pm}48.7{\mu}gm^{-2}hr^{-1}$, and $-3.21{\pm}31.39{\mu}gm^{-2}hr^{-1}$, respectively. During August (summer) both GHG emissions were found to be positive (averages of $2.45{\pm}20.11{\mu}gm^{-2}hr^{-1}$ for $N_2O$ and $1.36{\pm}9.09{\mu}gm^{-2}hr^{-1}$ for $CH_4$); which they were generally released from soil. During September (fall) $N_2O$ and $CH_4$ soil uptakes were observed and their means were $-1.35{\pm}12.78{\mu}gm^{-2}hr^{-1}$ and $-2.56{\pm}11.73{\mu}gm^{-2}hr^{-1}$, respectively. $N_2O$ emission was relatively higher in spring rather than other seasons. This could be due to dry soil condition during spring experimental period. It seems that soil moisture and temperature mostly influence gas production and consumption, and then emission rate in subsoil environment. Other soil parameters like soil pH and chemical composition were also discussed with respect to GHG emissions.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• The Korean Journal of Pharmacology
• /
• v.18 no.2
• /
• pp.79-87
• /
• 1982

Higenamine(dl-demethylcoclaurine, dl-1-(4-hydroxybenzyl)-6,7-dihydroxy-1,2,3,4-tetrah-ydroisoquinoline hydrochloride), which has recently been isolated from Aconite root by Drs. Kosuge and Yokota, has known to be the main cardiotonic component of the Aconite root. The present study was undertaken to investigate the effects of Higenamine on the calcium binding and release and ATPase activity of fragmented cardiac sarcoplasmic reticulum under in vitro condition. The calcium binding and release of sarcoplasmic reticulum were measured by using the double-beam spectrophotometer and the calcium sensitive dye, murexide. In the presence of $10^{-4}{\sim}5{\times}10^{-3}M$ of Higenamine, the maximal calcium binding and the initial binding rate of porcine cardiac sarcoplasmic reticulum were inhibited dose dependently by up to 43%. However, the calcium release from cardiac sarcoplasmic reticulum, which was loaded with $Ca^{++}(50{\mu}M)$, was stimulated in dose dependent manner. When incubated in the medium of 20 mM Tris-maleate(pH 7.0), 100 mM KCl, 10 mM $MgCl_2,\;0.05mM\;CaCl_2\;and\;0.014{\sim}1\;mM\;Tris-ATP\;at\;30^{\circ}C$ in the presence of Higenamine $(10^{-4}{\sim}5{\times}10^{-3}M)$, both $Ca^{++}-and\;Mg^{++}-ATPase$ of sarcoplasmic reticulum were inhibited non-competitively by Higenamine and values of $K_i$ were 4.896 mM and 6.875 mM respectively. It is suggested from the above findings that the cardiotonic effects of Higenamine might be partially explained by the inhibition of calcium binding and the stimulation of calcium release from the sarcoplasimic reticulum which may increase the free intracellular calcium that is available in the contraction of the cardiac muscle fiber.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1378-1385
• /
• 1999

The antioxidative activity of Fermented Anchovy on linoleic acid autooxidation was investigated in an aqueous system at pH 7.0. All solvent fractions from Fermented Anchovy were exhibited the strong antioxidative activity. Especially, BuOH and aqueous fractions were gained large amounts with strong antioxidative activity. Ultrafiltration, dialysis, heat treatment of aqueous fraction indicated that water-soluble antioxidants of Fermented Anchovy were heat-resistant, amino acid related compounds with smaller molecular weights than 1,000. Unbound fractions from DE-52 anion exchange chromatography were exhibited antioxidative activity with or without $15\;{\mu}M\;Fe^{+++}\;ion$. We were able to purify one methionine derivative from lots of antioxidative substances in Fermented Anchovy aqueous fraction by gel filtration, anion-exchange chromatography, TLC and HPLC, successfully. These data suggest that Fermented Anchovy aqueous fraction is a mixture of fermented small molecules with strong antioxidative activities.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.6
• /
• pp.690-695
• /
• 2005

Nitric acid is an oxidizing agent used in metal refining and cleaning, electroplating, and other industrial applications. Its accidental spillage generates oxides of nitrogen, including nitric oxide (NO) and nitrogen dioxide ($NO_2$), which cause chemical pneumonitis when inhaled. The clinical presentation of a nitric acid inhalation injury depends on the duration and intensity of exposure. In mild cases, there may be no symptoms during the first few hours after exposure, or the typical symptoms of pulmonary edema can appear within 3-24 hours. However, in cases of prolonged exposure, progressive pulmonary edema develops instantaneously and patients may not survive for more than 24 hours. We report a case of a 44-year-old male who was presented with acute respiratory distress syndrome after nitric acid inhalation. He complained of cough and dyspnea of a sudden onset after inhaling nitric acid fumes at his workplace over a four-hour period. He required endotracheal intubation and mechanical ventilation due to fulminant respiratory failure. He was managed successfully with mechanical ventilation using positive end expiratory pressure and systemic corticosteroids, and recovered fully without any deterioration in his pulmonary function.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.26-33
• /
• 2017

The objective of this study was to examine the immune-enhancing effects of polysaccharides isolated from Phellinus linteus mycelium on Mori ramulus. Crude polysaccharides were isolated by pressurized extraction ($121^{\circ}C$, $1.2kgf/cm^2$, 3 h), ethanol precipitation, and lyophilization. In addition, crude polysaccharides were further fractionated into unabsorbed fractions (PF-1, fraction No. 3~15) and absorbed fractions (PF-2, fraction No. 24~33) by DEAE-sepharose CL-6B column chromatography in order to isolate immune-regulating polysaccharides. The major constituents in PF-1 and PF-2 were total sugar (75.51% and 52.38%), total protein (1.63% and 8.41%), uronic acid (17.53% and 15.04%), and ${\beta}-glucan$ (28.33% and 25.04%), respectively. PF-1 increased production of nitric oxide (NO) and cytokines, such as tumor necrosis factor-alpha ($TNF-{\alpha}$) and interleukin-6 (IL-6) in a dose-dependent manner. The mRNA expression levels of inducible NO synthetase, cyclooxygenase-2, $TNF-{\alpha}$, and IL-6 markedly increased as determined by polymerase chain reaction analysis. The above data led us to conclude that macrophage activation of purified polysaccharides was higher than that of crude polysaccharides. The polysaccharides isolated from P. linteus mycelium on M. ramulus investigated herein are useful as natural immune-enhancing agents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.1-21
• /
• 1973

The muscle of abalone, Notohaliotis discus (REEVE), and top-shell, Turbo cornutus Solander, were examined for protein composition. Then paramyosins which are known as one of the important structural protein of the muscle fibrils were isolated from the both muscle and their physico-chemical properties such as solubility, salting-out behaviour, intrinsic viscosity, ATPase activity, etc. involving amino acid composition and N-terminal amino acid residues were investigated to elucidate phylogenie characteristics more intensively from the viewpoint of comparative biochemistry. The analysis of protein composition resulted in the following estimations: abalone muscle; water-soluble protein of 22 %, salt-soluble protein, 34%, alkali-soluble protein, 20%, and stroma protein, 24%, and top-shell muscle; water-soluble protein of 16%, salt-soluble protein, 30%, alkali-soluble protein, 29%, and stroma protein, 25%, respectively. It is demonstrated in sedimentation analysis that paramyosin and myosin-actomyosin account for approximately 65% and 35% of the salt-soluble protein of abalone, and that the composition of both sediments in top-shell was approximately 70% and 30%, respectively. The ultracentrifugally homogenous paramyosins isolated essentially according to Bailey's ethanol-dried method from both of the muscle showed a $S^{\circ}_{20,w}$ of 3. 14s for abalone and a $S^{\circ}_{20,w}$ of 3.50s for top-shell. The both paramyosins were commonly rich in arginine, aspartic acid, and glutamic acid, while scarcely contained proline and tryptophan, in rough accord with the other paramyosins thus far reported. It is clear that these gastropod paramyosins showed of having the characteristic N-terminal amino acid residues such as N-aspartic acid, N-valine, N-serine, and N-threonine in common. The abalone paramyosin completely salted in with KCl beyond $0.35{\mu}$ and the top-shell paramyosin beyond $0.30{\mu}$. The abalone paramyosin was salted-out between 18% and 30% saturation of ammonium sulphate and the top-shell paramyosin between 22% and 29% saturation. The intrinsic viscosities at abalone and top-shell paramyosins at $25^{\circ}C$ were estimated respectively to be 3.1 dl/g and 2.6 dl/g showing somewhat higher than the values for some other paramyosins from lamellibranchs. In regard with the ATPase activity, the para myosin specimens did not exhibit any significant activity over through the pH conditions of 5 to 9.5. irrespective of the presence of $Ca^{++}$ or $Mg^{++}$. So was the case with the abalone paramyosin prepared by a slightly modified Bailey's wet-extraction method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.333-340
• /
• 2018

This study aimed to estimate the effect of inoculant application level on chemical composition and bacterial count of fermented chestnut meal (FCM), and its rumen fermentation characteristics. The inoculant contained Lactobacillus acidophilus ($1.2{\times}10^{10}cfu/g$), Bacillus subtilis ($2.1{\times}10^{10}cfu/g$), and Saccharomyces cerevisiae ($2.3{\times}10^{10}cfu/g$). The chestnut meal mixed with molasses, double distilled water, and inoculant at 1 kg, 3 g, 480 mL, and 20 mL ratio for the basal chestnut meal diet. The double distilled water from basal chestnut meal diet was substituted with bacterial inoculant at a level of 0 (Control), 20 (Medium), and 40 mL (High) in the experimental diets. The mixed experimental diets were incubated at $39^{\circ}C$ for 7, 14, and 21 days, respectively. On 7 days of FCM incubation, the contents of crude protein (CP) (quadratic, P=0.043) and neutral detergent fiber (quadratic, P=0.071) decreased by increases of inoculant application levels, whereas bacterial count (quadratic, P=0.065) and rumen $NH_3-N$ (linear, P=0.063) increased. By increases of inoculant application levels on 14 days of FCM incubation, the increases were found on dry matter (DM) (quadratic, P=0.085), CP (quadratic, P=0.059), acid detergent fiber (quadratic, P=0.056), in vitro DM digestibility (linear, P=0.002), rumen total volatile fatty acid (VFA) (linear, P=0.057), and rumen iso-butyrate (linear, P=0.054). However, the decreases were found on bacterial count (linear, P=0.002), propionate (linear, P=0.099), and butyrate (quadratic, P=0.082). On 21 days of FCM incubation, in vitro DM digestibility (linear, P=0.002) and total VFA (linear, P=0.001) increased by increases of inoculant application levels, whereas the contents of CP (quadratic, P=0.034) and neutral detergent fiber (quadratic, P=0.047) decreased. These results indicate that the FCM with a medium level of inoculant application and 14 of fermentation had beneficial effects by increasing DM digestibility and rumen total VFA content, without altering bacterial count.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.4
• /
• pp.589-598
• /
• 2000

A pilot-scale Spray Drying Sorber (SDS) system was set up to evaluate the effect of spray characteristics on the desulfurization yield. The size distribution and the Sauter Mean Diameters of slurry droplets were measured in advance using the optical size measurement system, Malvern 2600. The desulfurization yield of the drying chamber by size was measured for the conditions of inlet gas and spray injection. As a reagent, 10% limestone slurry of $Ca(OH)_2$ was treated with flue gas containing $SO_2$, and the combustion gas analyzer and gas detectors were attached to measure the $SO_2$ concentration. With a flow rate of 144 Nm3/h and a temperature range of $200{\sim}300^{\circ}C$, the experiments were performed for the Stoichiometric Ratio (SR) of 1.0 to 3.0 and droplet mean diameter of 6.5 to $34.3{\mu}m$. In case of smaller spray droplets, the desulfurization efficiency improved due to the increase of total droplet surface area, while the reduction in evaporation time reduced the contact time between the droplets and $SO_2$ gas. In some typical region of droplet diameter, this negative effect, reduction of contact time, became dominant and the desulfurization yield decreases the desulfurization yield in spite of the expansion in absorption area. These results revealed that there exists the optimal size of spray droplets for a given state, which is determined by the compromise between the total surface area of slurry droplets and the evaporation time of droplets. The measurements also indicated that the inlet temperature of flue gas changes the optimal injection condition by varying the driving force for evaporation. The results confirm that the effect of the evaporation time of slurry droplets should be considered in analyzing the desulfurization yield as well as the total surface area, for it is a significant aspect of the correlation with the capabilities of $SO_2$ absorption in wet droplets. In conclusion, the optimal condition of spray can be determined based on these results, which might be applied to design or scale-up of SDS system.