• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1418-1424
• /
• 2011

This study proposes the suggested amount of clothing (SAC) and examines the preferred amount of clothing (PAC) for thermal comfort in mild cold conditions. Six male and nine female college students were systematically exposed to mild cold conditions by reducing the amount of clothing (Step I, 1.2clo ${\rightarrow}$ Step II, 1.0clo ${\rightarrow}$ Step III, 0.8clo ${\rightarrow}$ Step IV, 0.7clo). The subjects were then asked to adjust the amount of clothing to attain overall thermal comfort until they maintained thermal comfort for 10 minutes without changing the amount of clothing (Step V). The experiment was carried out in a climatic chamber at $19.5^{\circ}C$, 50%R.H. Body composition was measured and individual cold climate adaptability was surveyed before starting the experiment. Rectal temperature ($T^{re}$), skin temperature ($T_{sk}$), and oxygen consumption ($\dot{V}O_2$) were measured and the overall thermal sensation was voted in each step. PAC was obtained from the garments weight selected by each subject in Step V. SAC was proposed based on the change of oxygen consumption (${\Delta}\dot{V}O_2$). As a result, males showed higher $\bar{T}_{sk}$ and greater $O_2$ than females (p<.01). SAC obtained from $\dot{V}O_2$ were 652.0 (SE 3.9) g/$m^2$ for males and 766.0 (SE 2.5) g/$m^2$ for females and it was significantly different between groups (p<.01). PAC of males and females were 1.6 and 1.5 times heavier than SAC. In conclusion, females were more sensitive to the cold stress and recommended larger amount of clothing than males.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1705-1713
• /
• 2012

A gene encoding ${\beta}$-glucosidase was cloned from Weissella cibaria 37, an isolate from human feces. Sequence analysis showed that the gene could encode a protein of 415 amino acids in length, and the translated amino acid sequence showed homology (34-31%) with glycosyl hydrolase family 1 ${\beta}$-glucosidases. The gene was overexpressed in E. coli BL21(DE3) using pET26b(+) and a 50 kDa protein was overproduced, which matched well with the calculated size of the enzyme, 49,950.87 Da. Recombinant ${\beta}$-glucosidase was purified by using a his-tag affinity column. The purified ${\beta}$-glucosidase had an optimum pH and a temperature of 5.5 and $45^{\circ}C$, respectively. Among the metal ions (5mM concentration), $Ca^{2+}$ slightly increased the activity (108.2%) whereas $Cu^{2+}$ (46.1%) and $Zn^{2+}$ (56.7%) reduced the activity. Among the enzyme inhibitors (1 mM concentration), SDS was the strongest inhibitor (16.9%), followed by pepstatin A (45.2%). The $K_m$ and $V_{max}$ values of purified enzyme were 4.04 mM and 0.92 ${\mu}mol/min$, respectively, when assayed using pNPG (p-nitrophenyl-${\beta}$-D-glucopyranoside) as the substrate. The enzyme liberated reducing sugars from carboxymethyl cellulose (CMC).

• Journal of Microbiology and Biotechnology
• /
• v.21 no.11
• /
• pp.1151-1158
• /
• 2011

In this study, a galactooligosaccharide (GOS) was synthesized using active ${\beta}$-galactosidase (${\beta}$-gal) inclusion bodies (IBs)-containing Escherichia coli (E. coli) cells. Analysis by MALDI-TOF (matrix-assisted laser desorption/ionization-time of flight) mass spectrometry revealed that a trisaccharide was the major constituent of the synthesized GOS mixture. Additionally, the optimal pH, lactose concentration, amounts of E. coli ${\beta}$-gal IBs, and temperature for GOS synthesis were 7.5, 500 g/l, 3.2 U/ml, and $37^{\circ}C$, respectively. The total GOS yield from 500 g/l of lactose under these optimal conditions was about 32%, which corresponded to 160.4 g/l of GOS. Western blot analyses revealed that ${\beta}$-gal IBs were gradually destroyed during the reaction. In addition, when both the reaction mixture and E. coli ${\beta}$-gal hydrolysate were analyzed by high-performance thin-layer chromatography (HP-TLC), the trisaccharide was determined to be galactosyl lactose, indicating that a galactose moiety was most likely transferred to a lactose molecule during GOS synthesis. This GOS synthesis system might be useful for the synthesis of galactosylated drugs, which have recently received significant attention owing to the ability of the galactose molecules to improve the drugs solubility while decreasing their toxicity. ${\beta}$-Gal IB utilization is potentially a more convenient and economic approach to enzymatic GOS synthesis, since no enzyme purification steps after the transgalactosylation reaction would be required.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.7
• /
• pp.719-727
• /
• 2011

Botulism is a neuroparalytic disease caused by Clostridium botulinum, which produces seven (A-G) antigenically diverse neurotoxins (BoNTs). BoNTs are the most poisonous substances known to humans, with a median lethal dose ($LD_{50}$) of approximately 1 ng/kg of body weight. Owing to their extreme potency and lethality, they have the potential to be used as a bioterrorism agent. The mouse bioassay is the gold standard for the detection of botulinum neurotoxins; however, it requires at least 3-4 days for completion. Attempts have been made to develop an ELISA-based detection system, which is potentially an easier and more rapid method of botulinum neurotoxin detection. The present study was designed using a synthetic gene approach. The synthetic gene encoding the catalytic domain of BoNT serotype B from amino acids 1-450 was constructed with PCR overlapping primers (BoNT/B LC), cloned in a pQE30 UA vector, and expressed in an E. coli M15 host system. Recombinant protein production was optimized at 0.5 mM IPTG final concentration, 4 h post induction, resulting in a maximum yield of recombinant proteins. The immunogenic nature of the recombinant BoNT/B LC protein was evaluated by ELISA. Antibodies were raised in BALB/c mice using various adjuvants. A significant rise in antibody titer (p<0.05) was observed in the Alum group, followed by the Titermax Classic group, Freund's adjuvant, and the Titermax Gold group. These developed high-titer antibodies may prove useful for the detection of botulinum neurotoxins in food and clinical samples.

• Textile Coloration and Finishing
• /
• v.29 no.2
• /
• pp.97-103
• /
• 2017

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the p-aramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber for technical textiles. For this purpose, dyed polyketone fabric is prepared, mechanical properties of coated and uncoated polyketone fabrics such as tensile strength, elongation and tear strength were examined before and after weather resistance test(temperature $63{\pm}3^{\circ}C$, humidity 60%, amount of power $0.35w/m^2$). The differences of mechanical properties between uncoated and coated fabrics for high functional technical textiles and composite materials are estimated through this study. The UV-stability of polyketone fabric showed obvious improvement after coating. After 168h(7day) of UV exposure, the coated fabric showed less deterioration in mechanical properties with the retained tensile strength and elongation at break greater than 22 and 17% of the uncoated polyketone fabrics values, respectively.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.392-400
• /
• 2005

Highly integrated MPEG-4@SP video compression engine, VideoCore, is proposed for mobile application. The primary components of video compression require the high memory bandwidth since they access the external memory frequently. They include motion estimation, motion compensation, quantization, discrete cosine transform, variable length coding, and so on. The motion estimation processor adopted in VideoCore utilizes the small-size local memories such that the video compression system accesses external memory as less frequently as possible. The entire video compression system is divided into two distinct sub-systems: the integer-unit motion estimation part and the others, and both operate concurrently in a pipelined architecture. Thus the VideoCore enables the real-time high-quality video compression with a relatively low operation frequency.

• Quality Improvement in Health Care
• /
• v.25 no.2
• /
• pp.2-15
• /
• 2019

Purpose: The purpose of this study is to provide basic data for the development of the most appropriate and effective educational materials for patients and their caregivers through the educational experiences of patient safety officer. Methods: This study is a qualitative analysis that involves using the focus group interview to understand the patient safety education experience of the patient safety officer. Results: The patient safety education experience of the patient safety officer is divided into four topics: (1) patient safety education content (2) patient safety education method (3) patient safety education status (4) activation and improvement of patient safety education. Additionally, the study incorporated twelve subtopics: (a) falls (b) speak up (c) patient safety campaign (d) patient safety rounding and a one on one training (e) education through medical staff (f) education using broadcast, video, post, among others (g) a lot of education in patient (h) patients not interested in patient safety education (i) patient safety education is less effective (j) human and medical expenses support (k) provision of standardized educational materials (l) patient safety culture for patient participation. Conclusions: This study indicate that education for patients and the caregivers should be inclusive and protective of stakeholders from the risks involved in patient safety events. The experience of patient safety officer is necessary for patient safety education for both patients and the caregivers since it is the source of basic data for the future development of patient safety education.

• Quality Improvement in Health Care
• /
• v.14 no.2
• /
• pp.125-132
• /
• 2008

Background : The number of outpatient injected anticancer drug is increasing. and the pathway of prescribing, compounding, and injecting anticancer drug is processed very rapidly in out-patient department. Moreover, Dose of anticancer drug is often changed depending on side effect of patients. So we need more effective inspection of anticancer drug prescriptions. The purpose of this study was to analyze the prescription errors for anticancer drugs in Out-Patient Department and to suggest system to prevent them. Method : The study took place at Asan Medical Center from July to September 2007. The pharmacists performed inspection of anticancer drug prescriptions before compounding and injecting. We used protocol-based anticancer drug order program and Electronic Medical Record (EMR). Result : During the study period, we analyzed 4683 prescriptions for out-patient. And we detected 55 medication errors (1.2%). Most common errors included dosage above or below the correct ones (56.3%), followed by incorrect treatment duration. Because most of dosing errors were in the range of usual dosage, it was hard to detect them. So when inspecting the prescription, we considered the medical records of individual patients. As a result, we could raise the efficiency of intervention. Therefore inspection using EMR could possibly reduce the number of anticancer drug errors. Conclusion : we are preventing the medication errors on stability and dosage above or below the maximum therapeutic dose according to the previous inspection system. However most of dosing errors were in the range of usual dosage according to the result of this study. Because of there was interpatient variability of dosage depending adverse effect. For improvement of quality assurance, we suggest inspection system based on patient's medical history.

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.386-391
• /
• 2017

Two kinds of steels whose compositions were Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si-(0.009 or 0.35)S (wt.%) were centrifugally cast, and oxidized at $900^{\circ}C$ for 50-350 h in order to find the effect of sulfur on the high-temperature oxidation of Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si-(0.009 or 0.35)S (wt.%) alloys. These alloys formed oxide scales that consisted primarily of $Cr_2O_3$ as the major oxide and $Cr_2MnO_4$ as the minor one through preferential oxidation of Cr and Mn. They additionally formed $SiO_2$ particles around the scale/alloy interface as well as inside the matrices. The high affinity of Mn with S led to the formation of scattered MnS inclusions particularly in the 0.35S-containing cast alloy. Sulfur was harmful to the oxidation resistance, because it deteriorated the scale/alloy adherence so as to accerelate the adherence and compactness of the formed scales.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.215-226
• /
• 1993

Color stability of tooth colored restorative resins is an important factor, particularly in anterior teeth restoration. The purpose of this study was to evaluate the color stability and opacity change of several light curing composite resins. Specimens of eight composite resins(Prisma AP. H., Brilliant Enamel, Charisma, Durafil, Helio Progress, Herculite XR, P-50 and Silux Plus) were divided into two groups : In Group 1, the specimens were polymerized by visible light curing unit for 60 seconds on both sides and in Group 2, the post-cured specimens were heat tempered by light/heat curing unit for 45 units(about 18 min.). All specimens were stored in distilled water at $60^{\circ}C$ for 30 days. The color characteristics($L^*,a^*,b^*$) and opacity of the specimens before and after immersion were measured by spectrocolorimetry and the total color difference(${\Delta}E^*$) and opacity change (${\Delta}Y%$) were computed. The results obtained were as follows : 1. SP and APH in both groups, DF, HP and HXR in Group 1 showed ${\Delta}E^*$-value above 2.0. 2. DF, HP, SP and HXR in Group 1 showed higher ${\Delta}E^*$-value than in Group 2, but the others had no significant difference. 3. The opacity of CH and HXR in Group 1, and of CH and BE in Group 2 decreased after immersion, while that of the others increased. 4. Opacity change of BE, P50 and HXR was significantly different between Group 1 and 2. These results suggest that color change in the post-cure heat tempered specimens by light/heat curing unit was smaller than that of the specimens polymerized by visible light curing unit. No clinically detectable opacity changes were noted for any materials in either goup.