• Membrane Journal
• /
• v.28 no.3
• /
• pp.214-219
• /
• 2018

In the present study, superflux nickel capillary supports for gas and vapor separation membranes were prepared by a combined process of NIPS and sintering. Nickel capillary precursors were prepared by NIPS process from PSf-Ni-DMAC-PEG400 dope solution and was sintered at various temperatures in $H_2$ atmosphere to reliably produce Ni capillary support. The optimized Ni capillary support has an outer and inner diameters of 722 and $550{\mu}m$, and its thickness was $94{\mu}m$. It has 3-dimensional pore channel network and its porosity and mean pore diameter was 26% and $4{\mu}m$, respectively. Also, its mechanical strength was tested in tensile mode: its fracture load was 2.84 kgf and the fracture elongation was 13%. Finally, its single gas permeance was measured: He, $N_2$, $O_2$, and $CO_2$ permeance was 432,327, 281,119, 264,259, and 193,143 GPU, respectively. The superflux behavior could be explained from viscous flow through the macropores having a diameter of $4{\mu}m$ and narrow thickness. It could be concluded that the superflux behavior of the Ni capillary support was from the 3-D pore channel network and the small thickness.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.720-730
• /
• 1997

This study was performed to observe the histopathological response to the bonding resin directly applied on the remaining pulp tissues. 40 teeth from 3 adult dogs were pulpotomized with a sterile round bur and sharp excarvater. In the control group, $Ca(OH)_2$ powder was applied on the pulp tissue and the cavities were sealed with IRM cement. In the experimental group 1, Superbond C&B was applied on the remaining pulp and the cavities conditioned with 10-3 solution were filled with the mixture of the MMA liquid, PMMA powder and Catalyst. Multi-purpose adhesive was used on the remaining pulp tissue in the experimental group 2 and Z-100 was filled in the cavities. In the experimental group 3, Clearfil photobond applied and directly photo-cured on the pulp tissue, then the cavities were treated with CA agent (10% citric acid and 20% $CaCl_2$ aqueous solution) for 20 seconds, washed and applied with Clearfil photobond then filled with Protect liner. The experimental animals were sacrified at the 1st, 2nd, and 4th week. The specimens were routinely processed and stained with H-E for light microscopic observation. The results were as followed : 1. In the experimental group 1, the number and characteristics of the dentin bridge formation case was similar to those in the control group and less cases were observed in the experimental group 2 and 3 than experimental group 3. The inflammatory response in experimental group 1 was less than that in the control group at 1st week but there had been little difference at between 2nd and 4th week. 2. The number of the dentin bridge in experimental group 2 was less than that in control group and experimental group 1. The inflammatory response of the experimental group 1 was similar to that of experimental group 1 but less than that of the control group. A number of bleeding and vascular congestion were observed. The least inflammatory response was seen in the experimental group 2 among all groups. 3. In the experimental group 3, one case of the dentin bridge formation was observed and that was the same as that in the experimental group 2 but smaller than that of the control and experimental group 1. The inflammatory response of the experimental group 3 was least at the 1st week and most at the 4th week in the all group.

• Korean Journal of Weed Science
• /
• v.18 no.1
• /
• pp.54-62
• /
• 1998

This experiment was conducted to find out the effects of ABA and IAA on activities of antioxidant enzymes, antioxidant content, and growth of tobacco under exposure to ozone. The exposure to ozone in tobacco plant significantly decreased plant height, but it did not show any difference in vegetative characteristics except plant height of IAA $10^{-3}$M treated. Total chlorophyll content of NC 82 was dramatically decreased with increase in days after ozone treatment. However, reduction of chlorophyll was minimized when plant growth regulators were treated before ozone exposure. Three days treament of ozone in tobacco increased ascorbic acid of oxidised form, while slightly decreased `in reduced ascorbic acid by IAA treatment. But seven days of ozone treatment showed increase in ascorbic acid and decrease in dehydroascorbic acid. Ozone treatment did not show any difference in glutathione content and glutathione reductase activity when plant growth regulators were treated. Activities of superoxide dismutase(SOD), ascorbate peroxidase(AP) and guaiacol peroxidase(GP) were increased by the exposure to ozone for three days. However, there were no difference in activities of SOD, AP and GP due to exposure to ozone for seven days. These reactions may be interpreted as protective responses to prevent or alleviate the damage of tobacco plant by ozone exposure.

• Journal of Ginseng Research
• /
• v.44 no.2
• /
• pp.222-228
• /
• 2020

Background: 20(S)-ginsenoside-Rg3 (C₄₂H₇₂O₁₃), a natural triterpenoid saponin, is extracted from red ginseng. The increasing use of 20(S)-ginsenoside Rg3 has raised product safety concerns. Methods: In acute toxicity, 20(S)-ginsenoside Rg3 was singly and orally administrated to Kunming mice and Sprague-Dawley (SD) rats at the maximum doses of 1600 mg/kg and 800 mg/kg, respectively. In the 26-week toxicity study, we used repeated oral administration of 20(S)-ginsenoside Rg3 in SD rats over 26 weeks at doses of 0, 20, 60, or 180 mg/kg. Moreover, a 4-week recovery period was scheduled to observe the persistence, delayed occurrence, and reversibility of toxic effects. Results: The result of acute toxicity shows that oral administration of 20(S)-ginsenoside Rg3 to mice and rats did not induce mortality or toxicity up to 1600 and 800 mg/kg, respectively. During a 26-week administration period and a 4-week withdrawal period (recovery period), there were no significant differences in clinical signs, body weight, food consumption, urinalysis parameters, biochemical and hematological values, or histopathological findings. Conclusion: The mean oral lethal dose (LD₅₀) of 20(S)-ginsenoside Rg3, in acute toxicity, is above 1600 mg/kg and 800 mg/kg in mice and rats, respectively. In a repeated-dose 26-week oral toxicity study, the no-observed-adverse-effect level for female and male SD rats was 180 mg/kg.

• Journal of Preventive Medicine and Public Health
• /
• v.3 no.1
• /
• pp.97-110
• /
• 1970

This survey was conducted to evaluate not only the present status of health center directors-their personal histories, their will to private practice in the future, their responses to governmental policies, -but also the distribution of doctorless myons, budget and subsidy, and director's opinions to the enhancement of health center activities. This survey questioned 116 health center directors and 16 health personnel from August to October of 1970 and obtained the following results; 1) The average ages of directors of kun, city, and total health centers were $43.2{\pm}7.8,\;42.1{\pm}7.7,\;and\;42.9{\pm}10.3$ respectively. 2) The average family sizes of directors of kun, city, and total health centers were $5.6{\pm}2.7,\;5.6{\pm}2.1,\;and\;5.6{\pm}2.6$ respectively. 3) Directors holding M. D. degrees were 79.3%, those holding qualified M. D. degrees ('approved director') were 20.7%. 4) M. P. H., M. S., and Ph. D. holders were 6.0%, 6.1%, and 4.3% respectively. 5) The average duration of present directorship in kun and city were 30.2 months and 20.4 months respectively. 6) The majority of directors had been employed in related fields before assuming current position : directorship at other health center 26.7%, army 22.4%, health subcenter 21.6%, private practice 19.0%. 7) Average length of directorship is 41.8 months. Average length of public health career, including health subcenter and present position, is 56.5 months. 8) Both rural and urban experience in health centers for regular directors is 16.3% and for approved directors, 12,5%. A total of 15.5% of all survey directors had experience in both rural and urban health center. 9) A total of 70.7% of health center directorships were staffed by local doctors. 10) Nearly 40% wanted to quit the directorships within 3 years and 60.3% had already experienced private practice. 11) Of the regular directors 17.4% felt strongly about devoting their lives to public health fields, but only 4.1% of the approved approved directors felt so. 12) There wire 432 doctorless myons among 996 respondent myons and 4.5 doctorless myons per kun. 13) The percentage of doctorless myon by Province are as follows, Cholla buk-do 57.2%, Cholla nam-de 55.0%, Kyungsang nam-do 52.0%, Kyungsang buk-do 49.7%, Chungchong but-do 42.4%, Kyonggi-do 32.9%. Cheju-do 30.8%, Kangwon-do 25.8%. 14) Two thirds of health critters have experienced the abscence of the director for a certain period since 1966 and the average span of the abscence was 18.2 months. 15) The percentage of doctorless myons increased proportionally with the span of the director's abscence. 16) The average budgets of health centers, kun, city and ku, were $W15.03\;million{\pm}W4.5\;million,\;W22.03\;million{\pm}W17.80\;million,\;W13.10\;million{\pm}W7.9\;million$ respectively. 17) Chunju city had the highest health budget per capita(W344) while Pusan Seo ku had the lowest(W19). 18) Director's medical subsidies are W30,000-50,000 in kun, and roughly W20,000 in city. 19) The older of priority in health center activities is T.B. control(31.1%), Family Planning and M. C. H.(28.0%), prevention of acute communicable disease and endemic disease (18.2%) and clinical care of patients(14.3%). 20) Nearly 32% opposed in principle the governmental policy of prohibiting medical doctors from going abroad. 21) Suggestions for immediate enhancing the position of director of health centers and subcenters: (1) Raise the base subsidy (48.2%), (2) Provide more opportunities for promotion (20.7%), (3) Exemption from army services(12.1%), (4) Full scholarship to medical students for this purpose only (7.8%). 22) A newly established medical school was opposed by 56.9% of the directors, however 33.6% of them approved. 23) Pertaining to the division of labor in Medicine and Pharmacy, the largest portion (31.9%) urged the immediate partial division of antibiotics and some addictive drugs to be given only by prescription. 24) More than half wanted a W70,000 level for the director's medical subsidies, white 36.2% stated W50,000. 25) Urgently needed skills in the kun are clinical pathologist (38.6%) and doctor (health center director) (25.5%); while in the city nurse (37.1%), doctors(clinical)(31.4%) and health educators(14.4%) are needed. 26) Essential treatment for the better health center administration; raising the base subsidy (22.7%), obtaining the power of personal management (19.3%) and the establishment of a Board of Health (14.3%). etc.

• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.195-202
• /
• 2005

Two experiments were conducted to evaluate the effects of dietary salt levels on the performance in laying hens and broilers. In experiment 1, 108 Avian broilers of 21 days age were conducted to evaluate broiler's performance. The broilers were divided into 6 treatment groups with 6 pens (3 broilers/pen), and 134 diets with different levels of salt with 0.25 (control), 0.5, 1.0, 1.5, 2.0 and $2.5\%$, respectively, for 3 weeks $(3\~5 weeks)$. The feed intake was not affected by the treatments. However, moisture content in feces was increased as increasing levels of dietary salt (P<0.05). In experiment 2, 135 ISA Brown laying hens were used to evaluate on performance of laying hens. The dietary supplementation of salt levels were prepared at 0.25 (control), 1, 2, 3 and $4\%$, respectively, for 4 weeks. Feed intake was decreased as increasing the dietary salt levels during the experiment (P<0.05). Particularly, it was lower in $3\%\;and\;4\%$ salt level treatments compared with the control (P<0.05). As expected, water intake was increased as increasing the dietary salt levels (P<0.05). Therefore, the present results could indicate that dietary salt content need to be considered for broilers and laying hens.

• Journal of Applied Biological Chemistry
• /
• v.52 no.4
• /
• pp.205-211
• /
• 2009

This study was carried out to acquire basic data for industrial production of Korean traditional kanjang (soy sauce). Five types of meju, $23{\times}11{\times}12$ ($L{\times}W{\times}H$, cm), $23{\times}11{\times}7$, $15{\times}11{\times}7$, $11{\times}11{\times}6$, $11{\times}11{\times}6$ (made a hole $\varphi$ 1.5 cm) were prepared. The temperature and humidity of meju preparation were $15{\sim}20^{\circ}C$ and 40~50% respectively. The smaller size of meju, the lower free amino acid and non-volatile organic acid content of that. And, two types of meju, conventional method (CM-meju, the temperature and humidity were prepared at $15{\sim}20^{\circ}C$ and 40~50% of relative humidity) and improved method(IM-meju, the temperature and humidity were prepared at $25{\sim}30^{\circ}C$ and 80~90% of relative humidity) for kanjang production were prepared. There was no difference of total nitrogen content and soluble nitrogen content in the size of meju. In total free amino acid content and total free sugar content, IM-meju was the higher than CM-meju. So, the quality of IM-meju was better than that of CM-meju.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2003

For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.