• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.400-405
• /
• 2010

This study investigated lead adsorption by carboxylated alginic acid and its application in cleansing cosmetics. Carboxylated alginic acid showed the highest lead adsorptivity after oxidation in a 4-6 mM hydrogen peroxide solution at $20-30^{\circ}C$ for 30-40 min. Carboxylated alginic acid adsorbed $648.1{\pm}2.8-653.0{\pm}2.9$ mg/g of lead dry mass at pH 4-6. Carboxylated alginic acid modified by hydrogen peroxide and potassium permanganate adsorbed $651.3{\pm}3.8$ and $639.9{\pm}4.0$ mg/g of lead dry mass, respectively. Carboxylated alginic acid showed higher lead adsorptivity after modification by hydrogen peroxide than by potassium permanganate, with an increase of ~30% compared with raw alginic acid. To access the potential application of carboxylated alginic acid in cleansing cosmetics, we investigated the lead adsorptivity, conditions of the cosmetics procedure, and cytotoxicity of various concentrations of cleansing cosmetics added to 5% carboxylated alginic acid. The ideal cosmetic concentrations combined with 5% carboxylated alginic acid were 70% for peeling gel, 20% for massage cream, 20% for foam cleansing and 40% for cleansing cream. There was no cytotoxicity in cleansing cosmetics combined with 5% carboxylated alginic acid.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.165-170
• /
• 2014

PURPOSE. This study was aimed to evaluate effect of the desensitizing pretreatments on the micro-tensile bond strengths (${\mu}TBS$) to eroded dentin and sound dentin. MATERIALS AND METHODS. Forty-two extracted molars were prepared to form a flat dentin surface, and then they were divided into two groups. Group I was stored in distilled water while group II was subjected to a pH cycling. Each group was then subdivided into three subgroups according to desensitizing pretreatment used: a) pretreatment with desensitizer (Gluma); b) pretreatment with $CO_2$ Laser (Ultra Dream Pluse); c) without any pretreatment. All prepared surfaces were bonded with Single Bond 2 and built up with resin composite (Filtek Z250). The micro-tensile bond test was performed. Fracture modes were evaluated by stereomicroscopy. Pretreated surfaces and bonded interfaces were characterized by scanning electron microscope (SEM). The data obtained was analyzed by two-way ANOVA (${\alpha}$=0.05). RESULTS. For both sound and eroded dentin, samples treated with desensitizer showed the greatest ${\mu}TBS$, followed by samples without any treatment. And samples treated with $CO_2$ laser showed the lowest ${\mu}TBS$. SEM study indicated that teeth with eroded dentin appeared prone to debonding, as demonstrated by existence of large gaps between adhesive layers and dentin. CONCLUSION. Pretreatment with Gluma increased the ${\mu}TBS$ of Single Bond 2 for eroded and sound teeth. $CO_2$ laser irradiation weakened bond performance for sound teeth but had no effect on eroded teeth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.210-215
• /
• 2002

This thesis is contents on the crystal grown by the solide phase method at $925^{\circ}C$ with orthorhombic structure that $LiMnO_{2}$ active material synthesised with precurse $Mn_{2}O_{3}$ and $LiOH.H_{2}O$ material to get three voltage level. The porosity analysis of the grown crystal in secondary batteries $LiMnO_{2}$ thin film is $1.323E+02\AA$ of the average pore diameter of powder particles and its structure to be taken the pore diameter was prepared. Adding voltage area to get properties of charge and discharge of which experiment result of $LiMnO_{2}$ thin film area 2.2V~4.3V, current and scan speed were 0.1mAh/g and $0.2mV/cm^{2}$ respectively, and properties of the charge and discharge to be got optimum experiment condition parameter and density rate of Li for analyze that unit discharge capacity with metal properties is 87mAh/g was 96.9[ppm] at 670.784[nm] wavelength, and density rate of Mn analyzed 837[ppm] at 257.610[nm]. It can be estimated the quality of thin film that wrong cell reject from the bottle of electrolyte. The results of SEM and XRD were the same that of original researchers.

• Mycobiology
• /
• v.39 no.3
• /
• pp.200-205
• /
• 2011

Marssonina coronaria associated with apple blotch disease causes severe premature defoliation, and is widely distributed in Korea. Thirteen isolates were collected from orchards located in Gyeongbuk Province from 2005~2007. All isolates displayed over 99.6% and 99.2% sequence similarity to each other in internal transcribed spacer regions and partial sequences of 28S rDNA, respectively. The isolates were phylogenetically closely related to Chinese isolates. Selected isolates did not differ in their pathogenicity. The optimum conditions for fungal growth were $20^{\circ}C$ and pH 6 on peptone potato dextrose agar (PPDA). Peptone and mannose were the best nitrogen and carbon source, respectively. Fungal growth was better on PPDA than on common potato dextrose agar. This study provides valuable information for integrated disease management program and facilitates the routine culturing of M. coronaria.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.380-387
• /
• 2015

A lead slowing-down spectrometer (LSDS) system is a promising nondestructive assay technique that enables a quantitative measurement of the isotopic contents of major fissile isotopes in spent nuclear fuel and its pyroprocessing counterparts, such as $^{235}U$, $^{239}Pu$, $^{241}Pu$, and, potentially, minor actinides. The LSDS system currently under development at the Korea Atomic Energy Research Institute (Daejeon, Korea) is planned to utilize a high-flux ($>10^{12}n/cm^2{\cdot}s$) neutron source comprised of a high-energy (30 MeV)/high-current (~2 A) electron beam and a heavy metal target, which results in a very intense and complex radiation field for the facility, thus demanding structural shielding to guarantee the safety. Optimization of the structural shielding design was conducted using MCNPX for neutron dose rate evaluation of several representative hypothetical designs. In order to satisfy the construction cost and neutron attenuation capability of the facility, while simultaneously achieving the aimed dose rate limit (< $0.06{\mu}Sv/h$), a few shielding materials [high-density polyethylene (HDPE)eBorax, $B_4C$, and $Li_2CO_3$] were considered for the main neutron absorber layer, which is encapsulated within the double-sided concrete wall. The MCNP simulation indicated that HDPE-Borax is the most efficient among the aforementioned candidate materials, and the combined thickness of the shielding layers should exceed 100 cm to satisfy the dose limit on the outside surface of the shielding wall of the facility when limiting the thickness of the HDPE-Borax intermediate layer to below 5 cm. However, the shielding wall must include the instrumentation and installation holes for the LSDS system. The radiation leakage through the holes was substantially mitigated by adopting a zigzag-shape with concrete covers on both sides. The suggested optimized design of the shielding structure satisfies the dose rate limit and can be used for the construction of a facility in the near future.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.294-299
• /
• 2008

The present study investigates the ventilation effects on smoke spreading with the rescue stations. Experiments for tunnel fires were carried out for n-heptane pool em at different fire locations, and the heat release rates (HRR) were obtained by addition, using the commercial code (FLUENT), the present article presents numerical results for smoke behavior in railway tunnels with rescue station, and it uses the MVHS (Modified Volumetric Heat Source) model for estimation of combustion products resulting from the fire source determined from the HRR measurement. As a result, it is found that smoke propagation is prevented successfully by the fire doors located inside the cross-passages and especially, the smoke behavior in the accident tunnel can be controlled through the ventilation system because of substantial change in smoke flow direction in the cross-passages.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1195-1200
• /
• 2008

This study have goal with conceptual design for Offshore Structures of high pressure control valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the Offshore Structures high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the glycerin($C_3H_8O_3$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated until increasing 1bar to 10bar. CFD analysis used STAR-CCM+ which is commercial code and Governing equations were calculated by moving mesh which is rotated 90 degrees when ball valve operated opening and closing in 1 degree interval. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. Relation with flow and flow coefficient can not be proportional according to inlet pressure when compare with mass flow rate. Because flow coefficient have influence in flow and pressure difference. Namely, flow can be change even if it has same Cv value. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.3
• /
• pp.367-374
• /
• 2011

The purpose of this study was to determine the optimum condition for producing tea leaf Jeung-pyun that does not contain added parched tea leafs (0, 0.5, 1, 1.5, and 2%) while producing Jeung-pyun that has a variety of functional ingredients and to investigate the possibility of making practical application of tea leafs. Moisture contents were 56 ~66% and there were no significant differences among the samples. The pH of Jeung-pyun samples was 5.65~5.74. The L-value decreased as the amount of added tea leaf increased, and the a-value was low in the group made with added tea leafs. The b-value was high in the 1% added group and had a tendency to increase vs the control group as amount of added tea leaf increased. In the groups with added tea leaf the volume was evaluated as being higher in the order of 1>1.5>2%. The specific volume of the group with added tea leaf was evaluated as being higher in the order of 1>1.5>2%. Sensory characteristics of the group with added tea leaf were evaluated as being high. For characteristics of cell uniformity, rice wine flavor, and sweetness, the control group was evaluated as being high, and for characteristics of color, moistness, and softness the 1% added group was evaluated as high. Astringency was evaluated as being high in the 2% added group. Texture profile analysis was conducted after samples were maintained in an incubator at $20^{\circ}C$ for 0, 1, 3, 5, and 7 days. Characteristics for hardness, gumminess, chewiness tended to increase with longer periods of storage. Characteristics for cohesiveness, springiness tended to decrease as the storage period increased. As determined by this study, addition of 1% tea leaf was the most favorable method for making use of tea leafs the production of Jeung-pyun and a potentiality for the use of tea leafs in food was discorvered.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1999.07a
• /
• pp.63-67
• /
• 1999

We have isolated more than a dozen cDNA clones corresponding to genes that were expressed in Arabidopsis leaves when they were kept in the dark. The nucleotide sequence analysis showed that some of the clones encoded proteins with significant homology to $\beta$-glucosidase (din2), branched-chain $\alpha$-keto acid dehydrogenase subunit E1$\beta$(din3), and another subunit E2 (din4), yeast RAD23 (din5), asparagine synthetase (din6), pre-mRNA splicing factor SRp35 (din7), phosphomannose isomerase (din9), seed imbibition protein (din10), and 2-oxoacid-dependent oxidase (din11). Accumulation of transcripts from din3,4,6 and 10 occurred rapidly after the plants were transferred to darkness. Transcripts from din2,9, and 11 could be detected only after 24 h of dark treatment. Inhibition of photo-synthesis by DCMU strongly induced the accumulation of transcripts from those genes, and application of sucrose to detached leaves suppressed the accumulation both in the dark and by DCMU. These observations indicate that expression of the genes is caused by sugar starvation resulted from the cessation of photosynthesis. We further showed that din2-encoded protein also accumulated in senescing leaves. Given these results, possible roles of din genes in leaves in the dark and senescing leaves are discussed.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.121-125
• /
• 2002

Cherry tomato was packed with several plastic films, and investigated the quality characteristics such as gas composition, weight loss, microbial load, soluble solid content, total acidity during storage at 12$\^{C}$. Cast polypropylene(CPP), low density polyethylene(LDPE), polyolefin(MPD, PD961) and perforated polyolefin(PY85) were used as packaging film. Oxygen and carbon dioxide concentration inside packages generally showed a stabilized levels after 10 days, but those of CPP and PD961 changed throughout the storage. Weight loss of PY85 was 25.6 % after 20 days, while others maintained around 1.0%. Total microbial count showed a increase pattern similar to yeast and mold, and CPP maintained the highest microbial load after 10 days. MPD retarded the decay of cherry tomato to 5.3%, while others showed above 20% after 20 days.