• Journal of Biosystems Engineering
• /
• v.29 no.5 s.106
• /
• pp.419-424
• /
• 2004

In this study, a series of soil bin experiment was carried out to investigate experimentally the effect of the tire inflation pressure and axle load of tire on the steering torque for the off-road condition. The experiment was performed at the three levels of off-road conditions(ground I, ground II and ground III) and on-road condition(ground IV), four levels of tire inflation pressure(120 kPa, 170 kPa, 220 kPa and 270 kPa), and four levels of axle load(1470N, 1960N, 2450N and 2940N). The results of this study are summarized as follows: 1. Steering torque at the off-road conditions were higher than that on the on-road conditions for all levels of tire inflation pressure and axle load. 2. As the axle load increased, steering torque also increased f3r all experimental ground conditions. 3. For the axle load of 1470N the biggest steering torque was measured on the ground condition I, but as the axle load increased to the value of 2940N the biggest steering torque was measured on the ground condition III. From the above results, it was found that for the low axle load, steering torque gets higher on the soft ground condition, but for the high axle load, steering torque gets higher on hard ground condition for whole range of experimental conditions. 4. As the tire inflation pressure decreased, steering torque increased on the on-road condition, but no specific trend was not found at the off-road conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.231-234
• /
• 2005

수소 기반의 에너지 사회는 중소규모 분산 발전과 연료 전지 자동차에서 시작될 거라는 예측이 지배적이다. 가정용 고분자 연료전지 시스템은 상업화에 가장 가까운 소규모 분산 발전 시스템중의 하나이며, 에너지기술연구위원에서는 가정용 고분자 연료전지에 수소를 공급하기 위한 천연가스 수증기 개질시스템의 개발을 진행해 왔다. 효율 향상과 제작의 용이성, 그리고 소형화에 초점을 맞추어 개발된 prototype-I은 $2.0Nm^3/hr$의 순수 수소 생산 용량을 가지고 있으며, 수증기 개질기와 수성가스 전이 반응기 수중기 생성 장치, 그리고 반응열 공급에 필요한 버너 등을 이중 동심원관에 통합한 형태이다. 수중기 개질과 수성가스 전이 반응을 거쳐 나오는 개질 가스의 조성은 $72.3\%\;H_2,\;4.8\%\;CH_4,\;0.7\%\;CO,\;22.2\%\;CO_2$이며, 이때 S/C 비율은 2.5였다. 고분자 연료 전지 공급 시 요구되는 CO 농도가 10ppm 이하이기 때문에, 본 시스템에는 선택적 산화 반응기를 2단으로 설치하여 CO. 농도를 10ppm 이하로 낮추어주었다. 전체 시스템의 열효율은 LHV 기준으로 $68\%$. Prototype-I의 운전을 통해 설계 개선안을 도출하였으며, 이를 적용해 제작한 prototype-II가 시험 운전 중이다,. 통합된 개질 시스템에서는 각 단위 반응기사이의 열교환을 최적화하여 단위 반응들이 적정 온도 범위에서 일어나도록 유도하는 것이 중요하다. Prototype-II는 수증기 개질 반응기와 WGS 반응기, 수증기 생성 장치 사이의 열교환율을 향상시켜 농도를 $2.5\%$로 감소시키면서 CO의 농도는 $1\%$이하로 유지하였다. 이 결과를 바탕으로 얻어진 메탄 전환율은 $87\%$이고, 열효율은 LHV 기준으로 $75\%$이다. 아울러 개선점을 적용한 선택적 산화 반응기를 제작하였다. 개질 가스와 산소의 혼합을 유도하고, 반응기 온도의 제어를 통해 선택적 산화 반응의 속도와 선택성을 향상시키고자 한다. 시스템의 운전을 통해 메탄 전환율과 열효율의 개선을 진행할 예정이다.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.67-73
• /
• 2011

MGT fuelled by landfill gas was tested to asses feasibility of its exhaust gas application for $CO_2$ enrichment. The exhaust gas was analyzed during start-up and normal operation with different MGT load conditions. Due to the changes of air/fuel ratio and combustion mode, $O_2$, $CO_2$, CO and NOx concentration were varied within wide ranges during the MGT start-up. Especially, NOx emissioin level was increased up to 20.01 ppmv. Different tendencies of $O_2$, $CO_2$, CO and NOx concentrations were observed with MGT output changes. $O_2$ and CO concentrations were shown to be decreased and NOx and $CO_2$ concentrations were shown to have opposite trends. NOx emission level (0.8~1.88 ppmv) was very low compared to other types of combustion based power generation equipment. Unburned hydrocarbon emission level was substantially decreased with MGT load increase. Especially, $C_2H_4$ concentration was below the detection limit(0.2 ppmv) around the nominal load condition. The exhaust gas from landfill gas fuelled MGT system was shown to be feasible for $CO_2$ fertilization. Concentrations of major components were within or below the maximum allowable ranges.

• Biomolecules & Therapeutics
• /
• v.24 no.3
• /
• pp.283-290
• /
• 2016

Oroxylum indicum has long been used in Asian traditional medicine to prevent and treat respiratory diseases, diabetes, diarrhea and other conditions. Oroxylin A is a flavone that is present in Oroxylum indicum and in Scutellaria baicalensis. Because the root extracts of both plants have been shown to have anti-allergic effects, the authors investigated whether oroxylin A is likely to have beneficial effects on allergic asthma using female Balb/c mice and rat RBL-2H3 mast cells. Antigen-induced degranulation was measured in vitro by measuring b-hexosaminidase activity. A murine ovalbumin-induced allergic asthma model was used to test the in vivo efficacy of oroxylin A. Sensitization and challenge of ovalbumin induced allergic asthma responses, the accumulations of eosinophils and Th2 cytokine levels in bronchoalveolar lavage fluid and lung tissues. Oroxylin A administration decreased numbers of inflammatory cells, especially eosinophils, and reduced the expression and secretion of Th2 cytokines, including IL-4 and IL-13, in lung tissues and bronchoalveolar lavage fluid. Histologic studies showed oroxylin A reduced inflammatory signs and mucin production in lungs. These findings provide evidence that oroxylin A has potential use as an anti-allergic therapeutic.

• Parasites, Hosts and Diseases
• /
• v.54 no.3
• /
• pp.247-252
• /
• 2016

This study was conducted to investigate the occurrence of oxidative stress in the heart tissue of rats infected with Trypanosoma evansi. Rats were divided into 2 groups (A and B) with 12 animals each, and further subdivided into 4 subgroups (A1 and A2, 6 animals/each; and B1 and B2, 6 animals/each). Animals in the groups B1 and B2 were subcutaneously inoculated with T. evansi. Thiobarbituric acid reactive substances (TBARS), superoxide dismutase activity (SOD), glutathione S-transferase activity (GST), reduced glutathione activity (GSH), and non-protein thiols (NPSH) in the heart tissue were evaluated. At day 5 and 15 post-infection (PI), an increase in the TBARS levels and a decrease in the SOD activity (P<0.05) were observed. GSH and GST activities were decreased in infected animals at day 15 PI (P<0.05). Considering the proper functioning of the heart, it is possible that the changes in the activity of these enzymes involved in the oxidative stress may be related, at least in part, in the pathophysiology of rats infected with T. evansi.

• Molecular & Cellular Toxicology
• /
• v.4 no.2
• /
• pp.144-149
• /
• 2008

Despite versatile activity (cancericidal, antimicrobial, hypoxia inducible factor (HIF) inhibition, immune deactivation of DNA bis-intercalation agent, echinomycin, its specific mechanism has been elusive. Of these novel mechanisms, we reported that using human colon cancer cells (HT-29), apoptotic machinery induced by echinomycin might be dependent of caspase-3 pathway. Despite a partial enlightenment of prototypic signal path triggered by echinomycin, the role of Bcl-2 in this signaling pathway is unclear. To address this issue, we explored whether or not echinomycin would overcome the anti-apoptotic impact of Bcl-2 in HT-29 cells by the controlled Bcl-2 overexpression. Prior to this proof, we confirmed that echinomycin induces mitochondrial depolarization, then triggering the mitochondrial pathway of apoptosis with an involvement of upstream cas-pases-3. Transiently transfection with inactive Bax-DNA failed to prevent echinomycin-induced apoptosis in HT-29 cells. To dissect the role of Bcl-2 in echinomycin-induced apoptosis, HT-29 cells were transiently transfected with Bcl-2 DNA for overexpression and then treated with echinomycin for 24h. Combined analyses of DNA fragmentation and flow cytometric analysis clearly verified that echinomycin-induced apoptosis was drastically attenuated by Bcl-2 overexpression, whereas a control vector rarely affected echinomycin-induced apoptosis. Collectively, these data verify that Bcl-2 regulates echinomycin-induced apoptosis in HT-29 cells. To my knowledge, this is the first evidence that of diverse, structured minor groove binders (MGB), the prototypic echinomycin might control the apoptotic signaling via Bcl-2-mitochondrial pathway.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1507-1510
• /
• 2005

This study was carried out as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-\mu{m}-deep$ indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.49 GPa and 100 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46-0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined area during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Journal of the Korean Society of School Health
• /
• v.15 no.1
• /
• pp.49-62
• /
• 2002

This study was intended to examine the pattern and level of experience of voice problems and risk factors in school teacher, to offer basic data to prevent voice problems. The subjects were 180 school teachers from primary, middle, and high school teachers in C City, Chonbuk. Data were collected by questionnaires survey from April 30, 2001 to May 10, 2001. 56.6% of the subjects experienced voice problems such as "H-notes difficult"($2.68{\pm}.86$), followed by "Tired voice"($2.32{\pm}.93$), "Effortful voice"($2.27{\pm}.90$), and "Drying of throat"($2.21{\pm}.91$). According to general characteristics, smoking subjects showed higher voice problem than no smoking subjects and this difference was statistically significant(t=2.76, p=.007). According to voice related characteristics, "Speaking loudly" subjects showed higher voice problem than those no "Speaking loudly"(t=-2.02, p=.045). "Speaking effortful" subjects measured higher voice problem than those of "Speaking effortful" and this difference was statistically significant(t=-3.34, p=.001). The inspection of the relation of cause affecting school teachers showed that it had an interacting effect of voice habit, smoking, experienced voice problem, treatment(due to voice problem) experience, by staged it accounted for 55.3% of the total voice problem. The total voice problem indicated a positive correlation(p=.000). Conclusion: over half of the school teachers have experienced voice problems, higher perceived related of voice symptom and physical symptom factors. Also, because there are significant differences in voice problem according to smoking, voice habits of "Speaking loudly", "Speaking effortful", experienced voice problem, treatment(due to voice problem) experience.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.187-193
• /
• 2016

Fabrication of iron oxide/carbon nanotube composite structures for detection of ammonia gas at room temperature is reported. The iron oxide/carbon nanotube composite structures are fabricated by in situ co-arc-discharge method using a graphite source with varying numbers of iron wires inserted. The composite structures reveal higher response signals at room temperature than at high temperatures. As the number of iron wires inserted increased, the volume of carbon nanotubes and iron nanoparticles produced increased. The oxidation condition of the composite structures varied the carbon nanotube/iron oxide ratio in the structure and, consequently, the resistance of the structures and, finally, the ammonia gas sensing performance. The highest sensor performance was realized with $500^{\circ}C/2h$ oxidation heat-treatment condition, in which most of the carbon nanotubes were removed from the composite and iron oxide played the main role of ammonia sensing. The response signal level was 62% at room temperature. We also found that UV irradiation enhances the sensing response with reduced recovery time.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.