• Korean journal of applied entomology
• /
• v.15 no.4 s.29
• /
• pp.185-191
• /
• 1976

This study was conducted to evaluate the performance of 2,4-D amine salt (2,4-dichlorophenoxy acetic acid) 40EC in broadleaf weeds control under diverse conditions of rate and time of application and soil type in fall barley field. The results obtained were summarized as follows: 1) At the rate of 70cc prod./10a, 2,4-D amine salt treated during the fully tillered stage of barley was effective for the control of most broadleaf weeds without crop injury. 2) The fully tillered stage was a optimun time lot the application of 2,4-D amine salt in fall barley. Earlier(zero-to four-leaf stage) or late. (boot stage to flowering) application than this stage caused a crop injury and resulted in yield reduction. 3) It was possible to safely use 2,4-D amine salt in fall barley regardless of soil types if applied the rate of 70cc prod./10a at the fully tillered stage.

• Journal of the Korean Chemical Society
• /
• v.38 no.11
• /
• pp.833-840
• /
• 1994

8-Quinolinecarboxaldehyde (1) reacted with 1,5-hexadiene (2) in THF under Wilkinson's catalyst(3) and $AgBF_4(8)$ to give a mixture of 8-quinolinyl 5-hexenyl ketone (4) and 8-quinolinyl 5-hexen-2-yl ketone (9) at initial reaction stage. The reason for the formation of the branched alkenyl ketone 9 is supposed to be that the vacant coordination site, generated from Wilkinson's catalyst and $AgBF_4(8)$, makes it possible to form the 5.5 membered ring metallacycle intermediate. The higher the concentration of $AgBF_4(8)$ was used, the greater the ratio of 9 to 4 was observed. Longer reaction time and high temperature induced isomerization of 9 and 4 to 10 and 5. Especially the high reaction temperature increased the possibility of cyclization of the 5-hexenyl metal intermediate to give 8-quinolinyl cyclopentylmethyl ketone (11).

• Journal of Surface Science and Engineering
• /
• v.50 no.3
• /
• pp.219-224
• /
• 2017

The K gettering in $SiO_2/PSG/SiO_2/Al-1%Si$ multilevel thin films was investigated using SIMS(secondary ion mass spectrometry) and XPS(X-ray Photoelectron Spectroscopy) analysis. DC magnetron sputter techniques and APCVD(atmosphere pressure chemical vapor deposition) were utilized for the deposition of Al-1%Si thin films and $SiO_2/PSG/SiO_2$ passivations, respectively. Heat treatment was carried out at $400^{\circ}C$ for 5 h in air. SIMS depth profiling was used to determine the distribution of K, Al, Si, P and other elements throughout the $SiO_2/PSG/SiO_2/Al-1%Si$ multilevel thin films. XPS was used to analyze binding energies of Si and P elements in PSG passivation layers. K peaks were observed throughout the $PSG/SiO_2$ passivation layers on the Al-1%Si thin films and especially at the $PSG/SiO_2$ interfaces. K gettering in $SiO_2/PSG/SiO_2/Al-1%Si$ multilevel thin films is considered to be caused by a segregation type of gettering. The chemical state of Si and P elements in PSG passivation appears to be $SiO_2$ and $P_2O_5$, respectively

• Journal of The Korean Astronomical Society
• /
• v.50 no.2
• /
• pp.29-39
• /
• 2017

We investigate two abnormal CME-Storm pairs that occurred on 2014 September 10 - 12 and 2015 March 15 - 17, respectively. The first one was a moderate geomagnetic storm ($Dst_{min}{\sim}-75nT$) driven by the X1.6 high speed flare-associated CME ($1267km\;s^{-1}$) in AR 12158 (N14E02) near solar disk center. The other was a very intense geomagnetic storm ($Dst_{min}{\sim}-223nT$) caused by a CME with moderate speed ($719km\;s^{-1}$) and associated with a filament eruption accompanied by a weak flare (C9.1) in AR 12297 (S17W38). Both CMEs have large direction parameters facing the Earth and southward magnetic field orientation in their solar source region. In this study, we inspect the structure of Interplanetary Flux Ropes (IFRs) at the Earth estimated by using the torus fitting technique assuming self-similar expansion. As results, we find that the moderate storm on 2014 September 12 was caused by small-scale southward magnetic fields in the sheath region ahead of the IFR. The Earth traversed the portion of the IFR where only the northward fields are observed. Meanwhile, in case of the 2015 March 17 storm, our IFR analysis revealed that the Earth passed the very portion where only the southward magnetic fields are observed throughout the passage. The resultant southward magnetic field with long-duration is the main cause of the intense storm. We suggest that 3D magnetic field geometry of an IFR at the IFR-Earth encounter is important and the strength of a geomagnetic storm is strongly affected by the relative location of the Earth with respect to the IFR structure.

• Radiation Oncology Journal
• /
• v.3 no.2
• /
• pp.87-93
• /
• 1985

The interaction of radiation and 5-Fluorouracil (5-FU) on mouse jejunal crypt cells was studied using the microcolony survival assay. 150mg/kg of 5-FU was injected intraperitoneally 15 minutes before irradiation and 6 hours after irradiation. Jejunal crypt cells of mouse survived more when 5-FU was given 15 minutes before irradiation than giving it 6 hours after irradiation. The mean lethal doses (Do) of each of irradiation alone group, 5-FU injection group of 15 minutes preceding irradiation, and 5-FU injection group of 6 hours post irradiation were, 135, 135, and 114 rad respectively. The dose effect factor (DEF) of each of 5-FU injection groups of 15 minutes preceding irradiation and of 6 hours post irradiation were 1.13 and 1.27

• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.432-436
• /
• 2005

Nickel powders synthesized by the reduction of hydrazine of nickel salts fiom diethanolamine(DEA) solution, and investigated the morphological characteristics of nickel powders with the addition of hydrazine, reaction temperature, the composition of mixed solvents. The addition of hydrazine in DEA solution largely affected on size control of nickel powders. Under $N_2H_4/Ni^{2+}$ molar ratio= 1.5 and 2.0 conditions, spherical nickel powders in the submicron range obtained, owing to higher the reduction rate. An increase of temperature increased the size of nickel particles. At $220^{\circ}C$ for 40 min, the nickel powders composed of polyhedral particles with high crystalline in the submicron range. The mixed volume ratio of TEA to DEA affected on the increase of particle size and the inhibition of agglomerate between particles.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.2
• /
• pp.241-254
• /
• 2015

A lot of reinforced concrete (RC) structures in Syria went out of service after a few years of construction. This was mainly due to reinforcement corrosion or chemical attack on concrete. The use of blended cements is growing rapidly in the construction industry due to economical, ecological and technical benefits. Syria is relatively rich in scoria. In the study, mortar/concrete specimens were produced with seven types of cement: one plain Portland cement (control) and six blended cements with replacement levels ranging from 10 to 35 %. Rapid chloride penetration test was carried in accordance with ASTM C 1202 after two curing times of 28 and 90 days. The effect on the resistance of concrete against damage caused by corrosion of the embedded steel has been investigated using an accelerated corrosion test by impressing a constant anodic potential. The variation of current with time and time to failure of RC specimens were determined at 28 and 90 days curing. In addition, effects of aggressive acidic environments on mortars were investigated through 100 days of exposure to 5 % $H_2SO_4$, 10 % HCl, 5 % $HNO_3$ and 10 % $CH_3COOH$ solutions. Evaluation of sulfate resistance of mortars was also performed by immersing in 5 % $Na_2SO_4$ solution for 52 weeks. Test results reveal that the resistance to chloride penetration of concrete improves substantially with the increase of replacement level, and the concretes containing scoria based-blended cements, especially CEM II/B-P, exhibited corrosion initiation periods several times longer than the control mix. Further, an increase in scoria addition improves the acid resistance of mortar, especially in the early days of exposure, whereas after a long period of continuous exposure all specimens show the same behavior against the acid attack. According to results of sulfate resistance, CEM II/B-P can be used instead of SRPC in sulfate-bearing environments.

• Carbon letters
• /
• v.26
• /
• pp.18-24
• /
• 2018

Pollution of chloride ion-reinforced concrete can trigger active corrosion processes that reduce the useful life of structures. Multifunctional materials used as a counter-electrode by electrochemical techniques have been used to rehabilitate contaminated concrete. Cement-based pastes added to carbonaceous material, fibers or dust, have been used as an anode in the non-destructive Electrochemical Chloride Extraction (ECE) technique. We studied the performance of the addition of Carbon Fiber (CF) in a cement-graphite powder base paste used as an anode in ECE of concretes contaminated with chlorides from the preparation of the mixture. The experimental parameters were: 2.3% of free chlorides, 21 days of ECE application, a Carbon Fiber Volume Fraction (CFVF) of 0.1, 0.3, 0.6, 0.9%, a lithium borate alkaline electrolyte, a current density of $4.0A/m^2$ and a cement/graphite ratio of 1.0 for the paste. The efficiency of the ECE in the traditional technique using metal mesh as an anode was 77.6% and for CFVF of 0.9% it was 90.4%, with a tendency to increase to higher percentages of the CFVF in the conductive cement-graphite paste, keeping the pH stable and achieving a homogeneous ECE in the mass of the concrete contaminated with chlorides.

• Journal of Environmental Science International
• /
• v.6 no.2
• /
• pp.153-163
• /
• 1997

In order to fad the most fitted biodegradation model, biodegradation kinetics model to the initial phenol and p-cresot concentrations were investigated and had been fitted by the linear regression. Bacteria capable of degrading p-cresol were isolated from soil by enrichment culture technique. Among them, strain Ml capable of degradillg p.rcresol has also degraded phenal and was identified as the genus Micrococcus from the results from of taxonomical studies. The optimal tonditlons for the biodegradation of phenal and p-cresol by Micrococcus sp. Ml were $NH_4NO_3$ 0.05%, pH 7.0, 3$0^{\circ}C$, respectively, and medium volume 100m1/250m1 shaking flask. iwicrococcus sp. Ml was able to grow on phenal concentration up to 14mM and p-cresol concelltration up to 0.8mM. With increasing substrate concentraction, the lag period increased, but the maximum specific growth rates decreased. The yield coefficient decreased with increasing substrate concentation. The biodegradation kinetics of phenol and p-cresol were best described by Monod with growth model for every experimented concentration. In cultivation of mixed substrate, p-cresol was degraded first and phenol was second. This result implies that p-cresol and phenol was not degraded simultaneously.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.2
• /
• pp.325-330
• /
• 1996

전남지방의 전통 수산발효식품인 토하젓의 인지도 향상 및 국가경쟁력을 갖춘 지역특산품으로 발전시키기 위한 일련의 연구로써, 식품학적 기초자료를 얻기위하여 숙성기간이 다른 시판 토하젓을 구입하여 정미성분을 분석.검토하였다. 저온(5$\pm$2$^{\circ}C$)에서 90일간숙성시킨 토하젓의 전체 유리아미노산 함량은 건물당 1873.0mg/100g)보다 2배이상 많았다. 한편 숙성된 토하젓의 주요 유리아미노산(719.4mg/100g) 보다 2배 이상 많았다. 한편 숙성된 토하젓의 주요 유리아미노산은 glutamic acid, alanine, leucine, valine 및 phenylalanine으로 전체 유리아미노산에 대해 58.6%를 차지하였다. 핵산 관련물질은 담금 직후 및 숙성된 토하젓 모두 hypoxanthine의 함량이 월등히 많았으며, 그 다음으로 AMP 및 IMP순이였다. 그리고 숙성된 토하젓은 담금 직후의 토하젓과 비교해서 AMP 및 IMP는 적었으나, hypoxanthine의 함량은 많았다. 불휘발성 유기산을 GC분석한 결과, 담금 직후 및 숙성된 제품 모두에 lactic acid가 가장 많아 각각 건물당 389.3mg/100g 및 752.3mg/100g이였고, succinic acid는 미량 함유되어 있었다. 90일간 숙성된 TMAO, betaine 및 total creatinine 함량은 건물량 기준으로 각각 63.6mg/100g, 179.1mg/100g 및 123.7mg/100g이었다. Omission test를 이용하여 각정미성분을 관능검사한 결과, 유리아미노산 및 불휘발성 유기산이 토하젓의 맛에 중요한 역할을 하는 것으로 밝혀졌으며, 핵산 관련물질은 그다지 맛에 대한 기여도가 높지 않았다. 따라서 시판 토하젓의 맛에는 유리 아미노산 및 불휘발성 유기산이 중요한 역할을 하며, 핵산 관련물질이나 TMAO, betaine 및 total creatinine은 보조적인 역할을 할 것으로 생각된다.