• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.95-100
• /
• 2006

This study is to isolate bio-active compounds from Alnus firma and evaluate their antioxidant activity. Dried wood powder of A. firma was extracted by organic solvents and fractionated in the sequential extraction steps. The isolated compounds were characterized by EI-MS, $^{13}C-$ and $^1H-NMR$ including COSY, DEFT, HMQC, and HMBC. Antioxidant activities of the isolated compounds were evaluated by DPPH (1,1-diphenyl-2-picrylhydrazyl) free radical scavenging effect. From the wood of A. firma, three kinds of diarylheptanoids, alnusodiol (1), alnusonol (2) and alnusone (3), and gallic acid (4) were isolated. Among these four compounds, compound 1, 2, and 3 are isolated from A. firma for the first time. The antioxidant activity of gallic acid was 93.5% at the concentration of 100 ppm. This compound showed stronger antioxidant activity than those of other isolated compounds and the reference BHT (butylated hydroxytoluene).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.101-104
• /
• 2008

GaN films were grown on the vertical and horizontal reactors by the hydride vapour phase epitaxy (HVPE). The structural and optical characteristics of the GaN films were investigated depending on the reactor-type. GaN epilayers were characterized by double crystal X-ray diffraction (DC-XRD), transmission electron microscopy (TEM) and photoluminescence (PL). Surface defects of two kinds of the GaN films were revealed by the wet chemical etching method, using $H_3PO_4$ acid at $200^{\circ}C$ for 8 minutes. Hexagonal etch pits were analyzed by optical microscopy and SEM. Etch pit densities were calculated to be approximately $1.4{\times}10^7$ and $1.2{\times}10^6\;cm^{-2}$ for GaN layers grown on horizontal and vertical reactors, respectively. Those results show GaN grown in the vertical reactor having a better quality of optical properties and crystallinity than that in the horizontal reactor.

• Journal of Ginseng Research
• /
• v.27 no.3
• /
• pp.135-140
• /
• 2003

North American ginseng (Panax quinquefolius L.) was analysed for total ginsenosides and ten major ginsenosides (R$_{0}$ , Rb$_1$, Rb$_2$, Rc, Rd, Re, Rf, Rg$_1$, pseudoginsenoside F$_{11}$ and gypenoside XVII), and variations in ginsenoside content with age of plant (over a four-year-period) and geographic location (Ontario versus British Columbia) were investigated. In the roots the total ginsenoside content increased with age up to 58-100 mgㆍg$^{-1}$ dry weights in the fourth year, but in leaves it remained constant over time. Roots and leaves, moreover, had different proportions of individual ginsenosides. The most abundant ginsenosides were Rb$_1$ (56mgㆍg$^{-1}$ for Ontario; 37mgㆍg$^{-1}$ for British Columbia) and Re (21mgㆍg$^{-1}$ for Ontario; 15 mgㆍg$^{-1}$ for British Columbia) in roots, and Rd (28-38 mgㆍg$^{-1}$ ), Re (20-25 mgㆍg$^{-1}$ ), and Rb$_2$ (13-19 mgㆍg$^{-1}$ ) in leaves. Measurable quantities of Rf were found in leaves (0.4-1.8 mgㆍg$^{-1}$ ) but not in roots or stems. Our results show that ginsenoside profiles in general, and Rf in particular, could be used for chemical fingerprinting to distinguish the different parts of the ginseng plant, and that ginseng leaves could be valuable sources of the ginsenosides Rd, Re, and Rb$_2$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.244-251
• /
• 2005

The relationship between particle size of hydro-thermally synthesized barium titanate powders (BT01, BT02, BT03, BT04, BT05) and the powder properties was investigated by means of particle size, specific surface area, zeta potential, XPS, XRD and SEM. Particle size determined by laser light scattering is closely related with specific surface area and the tetragonality (c/a) obtained from XRD. The specific surface area of the samples inversely decreased with increasing particle size except BT03 powder. BT03 sample showed higher surface area than BT04 sample of equivalent particle size, which was attributed mostly to the agglomeration of particles in terms of SEM image and XRD analysis. Zeta potential increased with increasing particle size with the exception of BT02 and BT03 which showed larger minus value of zeta potential in comparison with other BT powders. Beta potential results of BT02 and BT03 are considered to be related with the dissolution of $Ba^{2+}$ ion in these powers which was examined by XPS.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.282-287
• /
• 2009

Rod-shaped particle reinforced $LiAlO_2$ matrices for MCFC were fabricated by an aqueous tape-casting technique. The hydrolysis reaction and agglomeration of $\gamma-LiAlO_2$ particles in aqueous slurries were inhibited by additions of $LiOH{\cdot}H_2O$ and glycerin to the aqueous $\gamma-LiAlO_2$ slurry. The tape-casting, performed using the aqueous slurry containing protein albumin, was fast and led to an effective drying at casting temperature range of $60{\sim}65^{\circ}C$. The strength of the particle reinforced matrix was improved about 4 times compared to that of matrix without reinforcement. Pore size distribution ($0.1{\sim}0.4{\mu}m$) and porosity ($50{\sim}60%$) of the reinforced matrices were determined to be appropriate for the MCFC matrix. The aqueous tape casting process is not only environmental-friendly but also efficient for fabricating MCFC matrices compared to non-aqueous tape casting.

• Journal of Animal Science and Technology
• /
• v.49 no.3
• /
• pp.303-308
• /
• 2007

In order to investigate the relation of production traits and reproduction traits the data from Gyungnam heugdon(Berkshire) were analyzed. Pearson correlation coefficients of the reproductive traits including days to first farrowing, days to first breeding and no. of breeding for first litter with back fat thickness were ranged -.24 to -.26. Estimates of heritability and genetic correlation for the reproductive traits including days to first farrowing, days to first breeding and no. of breeding for first litter showed frequent and wide fluctuation due to lack of reproductive records. Pearson correlation coefficients of back fat with litter traits were low, but genetic correlation coefficients were relatively high. Genetic correlation coefficients of back fat with total litter size, pigs born alive, litter weight at birth and litter weight at weaning were .21, .24, .11 and .07 respectively. It suggests that thin back fat thickness deteriorates performance of litter traits. Genetic correlation coefficients of days to 90kg with total litter size, pigs born alive, litter weight at birth and litter weight at weaning were .14, .17, .09 and .00 respectively. This result imply that genetic improvement on the production traits reduce the litter trait performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.655-659
• /
• 2010

Nanoporous titanium dioxide ($TiO_2$) is very attractive material for various applications due to the high surface to volume ratio. In this study, we have fabricated nanoporous $TiO_2$ thin films on Si by anodic oxidation. 500-nm-thick titanium (Ti) films were deposited on Si by using electron beam evaporation. Nanoporous structures in the Ti films were obtained by anodic oxidization using ethylene glycol electrolytes containing 0.3 wt% $NH_4F$ and 2 vol% $H_2O$ under an applied bias of 5 V. The diameter of nanopores in the Ti films linearly increased with anodization time and the whole Ti layer could become nanoporous after anodizing for 3 hours, resulting in vertically aligned nanotubes with the length of 200~300 nm and the diameter of 50~80 nm. Upon annealing at $600^{\circ}C$ in air, the anodized Ti films were fully crystallized to $TiO_2$ of rutile and anatase phases. We believe that our method to fabricate nanoporous $TiO_2$ films on Si is promising for applications to thin-film gas sensors and thin-film photovoltaics.

• Korean Journal of Agricultural Science
• /
• v.39 no.1
• /
• pp.35-41
• /
• 2012

This research was conducted to investigate the influence of organic bed soil substrates on growth and yield of organically grown ginseng transplantation in a shaded plastic houses. The pH and EC of the substrates used for this study were 5.93-6.78 and 0.03-0.15 dS/m, respectively. The concentrations of NH4-N and $NO_3$-N were 14.01-68.63 mg/L, 5.60-58.83 mg/L respectively. and the average quantum in the shaded plastic houses was 11-15% of natural light. The maximum temperature in the shaded plastic houses is higher ($3-7^{\circ}C$) than that of outside open field from the last part of April to early in August. Emergence date of ginseng was on March 21 in the mongolian type shaded plastic house, and was on March 29 in normal type shaded plastic house. Both roots and shoot growth of ginseng were excellent in the bed soils with PPV-2, compared with other compounds used. We concluded that the PPV-2 could be promising a good bed soil substrate for organic ginseng cultivation in shaded plastic house.

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.321-330
• /
• 1997

Enrofloxacin is one of the second-generation quinolones which have been widely used to treat bacterial infections in various species including chicken, pig, horse and cattle. The objective of the present study was to describe the serum bactericidal activity(SBA) of enrofloxacin, its pharmacokinetic behaviors after intramuscular or intravenous administration to Korean native goats in the dose rate of 5mg/kg b.w. The results obtained through this study were as follows : 1. Sera collected from both sexes of Korean native goats administered 5mg/kg i.v. or i.m. showed potent antibacterial activities up to the 12 hours by way of the serum bactericidal activity. 2. Concentrations of enrofloxacin in the biological samples were measured by high-performance liquid chromatography(HPLC) so as to study pharmacokinetic characteristics. For detection of enrofloxacin, 10% TCA was optimal for protein precipitation and the mobile phase was 0.01M citric acid/methanol/acetonitrile(7/2/1, pH 3.5) with solid phase being the $C_{18}$ reversephase column and detection wavelength being 278nm. The limit of detection of enrofloxacin on HPLC was $0.05{\mu}g/ml$. 3. Pharmacokinetic profile of enrofloxacin administered 5mg/kg i.v. in Korean native goats was best described by two-compartment open model and that administered i.m. the same rate by one-compartment model. There were no sex differences in pharmacokineticl parameters. In conclusion, enrofloxacin showed potent in vivo antibacterial activity and excellent pharmacokinetic properties in Korean native goats, hence it may be used as a potential antibacterial in the veterinary clinical settings.