• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.15-15
• /
• 1998

• 한국표면공학회지
• /
• 제44권2호
• /
• pp.50-54
• /
• 2011

Hydrophobic a-C:F film was coated on polycarbonate film with $CF_4$, $C_2F_6$ and HFC ($C_2F_4H_2$) gas in helium discharge generated by 5~100 kHz AC power supply at atmospheric pressure and room temperature. The highest water contact angle of the a-C:F film formed with $He/C_2F_6$ mixed gas is $155^{\circ}$. X-ray photoelectron spectrum showed that there was 40% of C-$CF_3$ bond at the surface of the super hydrophobic film. The contact angle and deposition rate were decreased with increasing substrate temperature. The contact angle was generally increased with the surface roughness of the film. The contact angle was high when the surface microstructure of the film was fine and sharp at the similar roughness and chemical composition of the surface.

• 한국영양학회:학술대회논문집
• /
• 한국영양학회 2000년도 추계학술대회 초록
• /
• pp.56-56
• /
• 2000

본 연구는 철분결핍과 caffeine섭취가 흰쥐의 혈당과 과산화에 미치는 영향을 알아보기 위해서 수행되었다. 생후 2주된 48마리의 Sprague-Dawley 수컷 흰쥐를 철분과 caffeine의 첨가 수준에 따라 6군으로 나누어 4주간 사육하였다(C0F0 : caffeine 0%, Fe 5 ppm diet, C1F0 : caffeine 1%, Fe 5 ppm diet, C4F0 : caffeine 4%, Fe 5 ppm diet, C0F1 : caffeine 0%, Fe 50 ppm diet, C1F1 : caffeine 0%, Fe 50 ppm diet, C4F1 : caffeine 0%, Fe 50 ppm diet).(중략)

• Journal of Nutrition and Health
• /
• 제29권5호
• /
• pp.517-527
• /
• 1996

The food consumption of 148 healthy infants from 4 to 6 months of age have been measured. Three groups were assigned to change of feeding pattern. Formula group(FF, n=102) were fed formula from birth till 6 months of age. Convert 1 group (C1F, n=14) and Convert 2 group (C2F, n=32) were fed breast milk and mixed milk at 2months of age afterthat switched to formula milk, respectively. All infants received solids (solid foods) from 4 months of age. No significant difference was found in the intake of nutrients among three feeding groups excluding carbohydrate intake of C1F-female at 4 months of age. No significant difference was found in the intake of nutrients among three feeding groups excluding carbohydrate intake of C1F-female at 4 months of age. The FF-female(70.9g/d) and C2F-female(66.9g/d) had significantly higher carbohydrate intake when compared to the C1F-female (54.3g/d). The average total energy intake at 4, 6 months were 648.3 and 709.7kcal/d among all infants. At 4 and 6 months of age, mean intake of nutrients was as follows. Calcium intake was 526.7mg/d and 760.0mg/d at 4 and 6 months of age respectively. Iron intake was 8.3mg/d and 10/5mg/d at 4 and 6 months of age respectively. Calories from solids provided 22.5% of total energy intake at 4 months of age, and nearly 32% at 6 months of age. The average energy and protein intakes of all infants were less than the RDA for calcium and iron at 4, 6 months of age.

• 한국세라믹학회지
• /
• 제17권2호
• /
• pp.61-68
• /
• 1980

The effect of the addition of various fluoreides on the mullitization of Korean crude kaolin was studied by X-ray powder diffraction and scanning electron microscopic methods. Kaolin without any addition of fluoreides began to be transformed into the mullite at 1, 10$0^{\circ}C$. Mullite peaks were discernible in the X-ray diffraction patterns of the specimens which contained fluorides equivalent to about 2 wt % fluorine, and which were sintered at 1, 05$0^{\circ}C$. The higher the concentration of fluorine in kaolin, the lower was the initiatinig temperature of mullitization. Experiments , for example, showed that mullite could be formed at 95$0^{\circ}C$ from kaolin mixed with 3.4% fluorine. Of the fluoride, addtives, sodiumsiliconfluoride $(Na_2SiF_6)$ was must effective in mullite formation of kaolin. In order of accelerating mullitization, the fluorides except $Na_2SiF_6$ could be placed in following sequence ; (1) sodium (NaF) (2) aluminium$(AlF_3)$ (3)potassium(KF) (4) ammonium$(NH_4F)$ (5) magnesium$(MgF_2)$ (6) calcium$(CaF_2)$. It was considered that the intrinsic characteristics of fluorides, such as size of ionic radiu, charge , bond strength between cation and anion, and electronegativity of cation affected millitization of halloysite, a main constituent mineral of kaolin.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.99-102
• /
• 2000

Via for achieving reliable fabrication of MCM-D substrate was formed on the photosensitive BCB layer. MCM-D substrate consists of photosensitive BCB(Benzocyclobutene) interlayer dielectric and copper conductors. In order to form the vias in photosensitive BCB layer, the process of BCB and plasme etch using $C_2$F$_{6}$ gas were evaluated. The thickness of BCB after soft bake was shrunk down to 60% of the original. AES analysis was done on two vias, one is etched in $C_2$F$_{6}$ gas and the other is non etched. On via etched in $C_2$F$_{6}$, native C was detected and the amount of native C was reduced after Ar sputter. On via non etched in $C_2$F$_{6}$, organic C was detected and amount of organic C was reduced a little after Ar sputter. As a result of AES, BCB residue was not removed by Ar sputter, so plasma etch is necessary for achieving reliable via.ble via.

• Environmental Analysis Health and Toxicology
• /
• 제31권
• /
• pp.2.1-2.4
• /
• 2016

Objectives In this study, we investigated the biodegradation features of 4 perfluorooctanesulfonate (PFOS) alternatives developed at Changwon National University compared to those of PFOS. Methods Biodegradation testing was performed with microorganisms cultured in the good laboratory practice laboratory of the Korea Environment Corporation for 28 days following the Organization for Economic Cooperation and Development guidelines for the testing of chemicals (Test No. 301 C). Results While $C_8F_{17}SO_3Na$, PFOS sodium salt was not degraded after 28 days, the 4 alternatives were biodegraded at the rates of 20.9% for $C_{15}F_9H_{21}S_2O_8Na_2$, 8.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, 22.6% for $C_{23}F_{18}H_{28}S_2O_8Na_2$, and 23.6% for $C_{25}F_{17}H_{32}O_{13}S_3Na_3$. Conclusions $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, and $C_{15}F_9H_{21}S_2O_8Na_2$ were superior to PFOS in terms of biodegradation rates and surface tension, and thus they were considered highly applicable as PFOS alternatives. Environmental toxicity, human toxicity, and economic feasibility of these compounds should be investigated prior to their commercialization.

• 대한수학회지
• /
• 제47권6호
• /
• pp.1147-1165
• /
• 2010

In this paper we compare a torsion free sheaf F on $P^N$ and the free vector bundle $\oplus^n_{i=1}O_{P^N}(b_i)$ having same rank and splitting type. We show that the first one has always "less" global sections, while it has a higher second Chern class. In both cases bounds for the difference are found in terms of the maximal free subsheaves of F. As a consequence we obtain a direct, easy and more general proof of the "Horrocks' splitting criterion", also holding for torsion free sheaves, and lower bounds for the Chern classes $c_i$(F(t)) of twists of F, only depending on some numerical invariants of F. Especially, we prove for rank n torsion free sheaves on $P^N$, whose splitting type has no gap (i.e., $b_i{\geq}b_{i+1}{\geq}b_i-1$ 1 for every i = 1,$\ldots$,n-1), the following formula for the discriminant: $$\Delta(F):=2_{nc_2}-(n-1)c^2_1\geq-\frac{1}{12}n^2(n^2-1)$$. Finally in the case of rank n reflexive sheaves we obtain polynomial upper bounds for the absolute value of the higher Chern classes $c_3$(F(t)),$\ldots$,$c_n$(F(t)) for the dimension of the cohomology modules $H^iF(t)$ and for the Castelnuovo-Mumford regularity of F; these polynomial bounds only depend only on $c_1(F)$, $c_2(F)$, the splitting type of F and t.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.23-30
• /
• 2014

$SiC_f$/SiC 복합재를 제작하여, $SiC_f$/SiC 복합재의 섬유배향 방향에 따르는 마모 특성을 평가하고, 마모시에 발생하는 탄성파를 검출하고 분석하였다. $SiC_f$/SiC 복합재는 섬유의 종 횡방향에 의한 마찰계수와 마모손실은 비슷하였으나, 섬유의 수직방향은 가장 작은 값을 나타내었다. 이것은 섬유의 취성 특성 때문이라 판단되며, 마모손실과 마찰계수는 정비례의 관계를 나타내었다. SiC 단상재의 탁월주파수는 58.6 kHz를 나타내고, $SiC_f$/SiC 복합재의 탁월주파수는 117.2와 136.7 kHz였다.

• Bulletin of the Korean Chemical Society
• /
• 제18권2호
• /
• pp.218-221
• /
• 1997

When phenylation of styrene was carried out in the presence of Pd(OAc)2 and PPh3 in benzene, trans-stilbene was obtained in good yield (566%) with high selectivity (98%) under mild condition (55 ℃, 50 psi O2, 20 h). Since trans-stilbene could be produced not only from benzene but also from phenyl group of PPh3 by migration of its phenyl group to Pd, the competitiveness of benzene and the migratory aptitude of aryl group of triarylphosphine toward styrene has been investigated with various phosphines (PR3: P(p-C6H4CH3)3, P(p-C6H4OCH3)3, P(p-C6H4F)3, P(p-C6H4Cl)3, P(C6H5)3, P(C6H11)3, P(OC4H9n)3, P(CH2C6H5)3 and P(C6F5)3). The yield and selectivity toward trans-stilbene are increased as the basicity of the phosphines increases. The composition of arylated olefin from arylphosphine, in turn, increases as the electronegativity of the substituent on the aryl group of arylphosphines increases.