• Sleep Medicine and Psychophysiology
• /
• v.8 no.2
• /
• pp.121-128
• /
• 2001

Objectives: In narcoleptic patients diagnosed with ICSD (international classification of sleep disorders, 1990) criteria, nocturnal polysomnography, and MSLT (multiple sleep latency test), we tried to find characteristic features of quantitative electroencephalography (QEEG) in a wakeful state. Methods: We compared eight drug-free narcoleptic patients with sex- and age-matched normal controls, using computerized electroencephalographic mapping technique and spectral analysis. Absolute power, relative power, interhemispheric asymmetry, interhemispheric and intrahemispheric coherence, and mean frequency in each frequency band (delta, theta, alpha and beta) were measured and analyzed. Results: Compared with normal controls, narcoleptic patients showed decrease in monopolar interhemispheric coherence of alpha frequency bands in occipital ($O_1/O_2$), parietal ($P_3/P_4$), and temporal ($T_5/T_6$) areas and beta frequency band in the occipital ($O_1/O_2$) area. Monopolar intrahemispheric coherences of alpha frequency bands in left hemispheric areas ($T_3/T_5$, $C_3/P_3$ & $F_3/O_1$) decreased. Decrease of monopolar interhemispheric asymmetry of delta frequency band in the occipital ($O_1/O_2$) area was also noted. The monopolar absolute powers of beta frequency bands decreased in occipital ($O_2,\;O_z$) areas. Conclusion: Decreases in coherences of narcoleptic patients compared with normal controls may indicate fewer posterior neocortical interhemispheric neuronal connections, and fewer left intrahemispheric neuronal connections than normal controls in a wakeful state. Therefore, we suggest that abnormal neurophysiological sites of narcolepsy may involve complex areas such as neocortex and subcortex as well as the brainstem.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.776-780
• /
• 2007

A biofilm reactor packed with porous media was investigated for nitrogen removal of synthetic wastewater. The effect of different loading rates on the nitrification was sustained to be steady state with stable efficiency of 50~60% in the range of $0.0083{\sim}0.017gNH_4-N/gMLVSS{\cdot}day$ of F/MN ratio and $1{\sim}2kgNH_4-N/m^3{\cdot}day$ of media volumetric loading rate. However, nitrification efficiency was rapidly decreased to 25~30% as F/MN ratio and media volumetric loading rate were increased to the range of $0.025{\sim}0.034gNH_4-N/gMLVSS{\cdot}day$ and $3{\sim}4kgNH_4-N/m^3{\cdot}day$, respectively. Also the consumption rate of alkalinity was higher under 8 hours of HRT than unter 6 hours of HRT. Accordingly the influent loading rate variation by detention time with influent flow influenced more on the nitrification efficiency than the influent loading rate variation by the influent concentration did. The temperature effect on the nitrification showed 25% higher in summer than in winter as the results reported by other researchers who reported that the nitrification efficiency in biofilm showed 20% increase from 55% to 75% when the temperature was raised from $20^{\circ}C$ to $25^{\circ}C$. Denitrification with sulfur-media showed 90% removal efficiency under steady-state with no effect from the increase of influent concentration and empty bed contact time (EBCT) change such as EBCT was decreased from 8.4 hr to 4.3 hr and $NO_3-N$ loading rate was changed within the range of $0.1{\sim}0.4kgNO^3-N/m^3{\cdot}day$. Accordingly Denitrification with sulfur-media is feasible for post denitrification at the concentration less than $80mgNO^3-N/L$.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.277-277
• /
• 2017

The research was carried out to investigate a total polyphenol content, antioxidant activity, amino acid and resveratrol content of peanut sprouts (cotyledon, epicotyl, leaf, hypocotyl, root), in different light (white, blue, red, F-red, UV-A, UV-B, UV-C) conditions for 24 hours. Peanut seeds were sown on a $27.5{\times}15.9{\times}13cm$ tray and grown at the $25^{\circ}C$ under the dark condition for 14 days. Total polyphenolic contents of epicotyl and leaf were about 288mg GAE/100g in blue light. The DPPH radical scavenging of cotyledon and hypocotyl were 1.3~1.5 times (63%) and 2 times (40%) compared to control (43%, 19%), respectively. As to ABTS activity, its activity was increased by all LEDs treatment, Especially, the highest ABTS activity of the hypocotyl and leaf was shown as 99.1% in blue light. The essential amino acid content of hypocotyl and leaf was increased 1.9 times in the UV-B, 1.6 times in red, and 1.5 times in F-red, respectively. The non-essential amino acid content was increased by all LEDs treatment in hypocotyl and leaf. The content of resveratrol was increased by 1.3 times in UV-B compared to that of other tissues. Assessing inclusively, this study showed that there was a significantly positive effect between increase of physiological substance activity and LED light treatment, resulting in stably producing peanut sprouts. Therefore, a material treated with LEDs is thought to be useful as a functional food resources.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1768-1773
• /
• 2016

This experiment was conducted to determine the effect of variety and planting year on the nutritive values of corn fed to growing pigs. Four corn varieties examined in this experiment were planted in the same village located in Longhua County, Heibei Province, China, in 2012, 2013, and 2014, respectively. During each year, corn was hand-harvested in early October and sun dried to about 14% moisture content. Three batches of twenty-four barrows ($33.27{\pm}4.30$, $31.88{\pm}2.93$, $34.21{\pm}3.81kg$ body wight [BW] in 2012, 2013, and 2014, respectively) were used and allotted to a complete block design with 4 diets and 6 replicate pigs per diet. Pigs were individually placed in metabolic crates. The four experimental diets were formulated by mixing each variety of corn and vitamins and minerals, respectively. A five-day collection period followed a seven-day diet acclimation period. The results indicated that variety of corn significantly influenced the available energy content (digestible energy [DE] on dry matter basis, p<0.05; metabolizable energy (ME) on dry matter basis, p<0.05, respectively), and the apparent total tract digestibility (ATTD) of organic matter (p<0.01), dry matter (p<0.05), gross energy (p<0.05), neutral detergent fiber (p<0.01), acid detergent fiber and ether extract (p<0.05). The planting year also significantly influenced the available energy contents (DE on dry matter basis, p<0.05; ME on dry matter basis, p<0.01, respectively) and the ATTD of neutral detergent fiber (p<0.01), acid detergent fiber (p<0.01), crude protein (p<0.01), and ether extract (p<0.01). No interaction was observed between the variety and planting year in DE and ME contents in corn. In conclusion, the variety and planting year significantly influenced the available energy and nutrient digestibility of corn fed to growing pigs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.675-686
• /
• 2007

Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.

• The Mathematical Education
• /
• v.58 no.1
• /
• pp.101-120
• /
• 2019

The goal of this study was to apply an expectancy-value model(Wigfield & Eccles, 2000) to explain changes in six multi-ethnic students' achievement motivation in mathematics during sixth (2012) to eighth (2014) grades. In order to achieve this goal, we used narrative research methods. Although individual students' achievement motivation and mathematics related life experiences differed, there are some common factors influencing their motivation development, especially (a) roles played by parents and teachers; (b) assessment of peers' competencies; (c) past learning experiences related to mathematics curriculum; (d) perception of the relationship between mathematics competency and other subjects; (e) home backgrounds; and (f) perceived task values. In this study, we achieved some insight into why some multi-ethnic students are willing to study hard to get good scores while others are uninterested in mathematics, and why some multi-ethnic students are likely to pursue new mathematical tasks and persist despite challenges, while others easily give up studying mathematics in the face of adversity. We argue that in order to increase and sustain multi-ethnic students' achievement motivation, educators and parents should recognize that motivation is contextually formulated in the intersection of current people, time, and space, not a personal entity formed in an individual's mind. The findings of this study shed light on the development of achievement motivation and can inform efforts to develop multi-ethnic students' positive motivation, which might influence their mathematics achievement and success in school.

• The Korea Journal of Herbology
• /
• v.38 no.5
• /
• pp.85-95
• /
• 2023

Objectives : This study was intended to reveal the chemical profiles of aerial(leaf, stem) and underground(rhizome, radix) parts of wild ginseng, and to investigate their anti-aging effects on human skin cells. Methods : Wild ginseng, estimated for over 20 years, was divided into the aerial and underground parts. Total phenolic contents of each extracts were measured using a Folin-ciocalteu method. The contents of 18 amino acids, 8 minerals and 27 ginsenosides were determined by GC-FID, ICP-MS and LC-MS, respectively. The anti-aging effects, including the radical scavenging activity, the activation of mitochondrial function on human fibroblasts, and the proliferation activity on human keratinocyte progenitor cells, for the whole plant and underground part of wild ginseng were evaluated. Results : The total phenolic acids, amino acids, and minerals in the aerial part were more than twice as high as in the underground part. Compared to the cultivated ginseng root, there were various types of ginsenosides in both parts of wild ginseng, and the total amount was more than twice as high. In particular, the aerial part significantly contained ginsenoside F1, F2, C-Mc1, and C-O, and the distinctive patterns that distinguish each parts of wild ginseng from the cultivated ginseng root were derived. The whole plant and underground part of wild ginseng exhibited significant antioxidant effect(14.3-45.6%), activation of mitochondrial membrane potential(105.5-120.1%), and cell proliferation(112.1-125.4%). Conclusions : The entire plant and underground part of wild ginseng are high value-added plants and have beneficial effects on skin anti-aging properties through its abundant metabolites.

• Journal of fish pathology
• /
• v.23 no.3
• /
• pp.357-367
• /
• 2010

The pharmacokinetic properties of amoxicillin trihydrate (Amox) were studied after single oral administration and single intravenous injection to cultured eel, Anguilla japonica, respectively (average $220{\pm}10\;g$, $28{\pm}1^{\circ}C$). Plasma samples were taken at 3, 5, 10, 15, 24, 30, 48, 96 and 144 h post-dose. The kinetic profile of absorption, distribution and elimination of Amox in plasma were analyzed fitting to a two-compartment model by WinNonlin program. In oral dosage of 40 and 80 mg/kg body weight, the peak plasma concentrations of Amox, which attained at 3~12 h post-dose, were 3.4 and $3.3\;{\mu}g/ml$, respectively. In intravenous injection with 1 mg/kg, the peak plasma concentrations of Amox, which attained at 9 h post-dose, was $7.2\;{\mu}g/ml$. The following parmeters were calculated for a single oral dosage of 40 and 80 mg/kg body weight, respectively: AUC (the area under the concentration-time curve)= 464 and $667\;{\mu}g{\cdot}h/ml$; $T_{max}$ (time for maximum concentration)= 2.1 and 3.6 h; $C_{max}$ (maximum concentration)= 3.04 and $3.4\;{\mu}g/ml$. Following intravenous injection at 1 mg/kg, this parameters were AUC= $748\;{\mu}g{\cdot}h/ml$; $C_{max}=4.2\;{\mu}g/ml$. The apparent oral bioavailability at 40 and 80 mg/kg were 1.6 and 1.1%, respectively. Despite using the trihydrate form of amoxicillin, the oral bioavailability was low in eel.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.