• 대한산업공학회지
• /
• 제30권1호
• /
• pp.65-75
• /
• 2004

The enhancement of C2(Command and Control) system will increase effectiveness of individual force power in combat engagement. Especially, available time of a given engaging force and information accuracy are the most influencing factors to increment of combat effectiveness after enhancement of C2 system. In this paper, by using Schutzer's C2 Theory and Measures of Effectiveness, we developed several analytical functions representing the relationships between C2 system enhancement and two most critical variables, available time and information accuracy. As a result of functional analysis, we showed C2 system enhancement and combat effectiveness have positive and non-linear relationship. The higher level of C2 system be required, the better combat effectiveness of force power can be obtained. Additionally, we proposed a proposition that the combat effectiveness of C2 system is more sensitive to available time than to information accuracy, which might be very important issue for further research in this field.

• Journal of Animal Science and Technology
• /
• 제44권4호
• /
• pp.453-458
• /
• 2002

본 연구는 실험방법이 간단하고 분석비용이 저렴하며, 단시간내에 세균수를 측정할 수 있는 현장적용 가능한 방법을 확립하기 위하여 냉장우육의 총균수를 표준평판배양법과 배양온도를 25$^{\circ}C$, 30$^{\circ}C$, 35$^{\circ}C$ 별로 레자주린 환원색과 환원시간을 측정하여 상관관계를 산출하였다. 연구결과를 보면, 총균수(25$^{\circ}C$/72시간, Y)와 레자주린 환원시간(X)과의 상관계수는 RRT (Resazurin reduction test) 배양온도가 25$^{\circ}C$와 30$^{\circ}C$, 환원색은 청색에서 분홍색으로 변할 때가 각각 -0.95와 -0.94로서 가장 높았다. 상관계수와 환원시간을 감안할 때 RRT 배양온도는 30$^{\circ}C$가 적합하였으며, 이때 회귀방정식은 Y = -0.4386X+7.7870이었으며, 돼지고기의 총균수가 $10^2$, $10^3$, $10^4$cfu/$cm^2$일 경우 검사시간은 13.2시간, 10.9시간, 8.6시간이었다. 총균수(30$^{\circ}C$/72시간, Y)와 레자주린 환원시간(X)과의 상관계수는 RRT 배양온도가 30$^{\circ}C$, 환원색은 청색에서 분홍색으로 변할 때가 -0.93으로서 가장 높았다. 이때 회귀방정식은 Y=-0.4171X+7.5540이었으며, 돼지고기의 총균수가 $10^2$, $10^3$, $10^4$ cfu/$cm^2$일 경우 검사시간은 13.3시간, 10.9시간, 8.5시간이었다. 총균수(35$^{\circ}C$/48시간, Y)와 레자주린 환원시간(X)과의 상관계수는 RRT 배양온도가 30$^{\circ}C$, 환원색은 청색에서 분홍색으로 변할 때가 -0.93으로서 가장 높았다. 이때 회귀방정식은 Y=-0.3514X + 6.7513이었으며, 돼지고기의 총균수가 $10^2$, $10^3$, $10^4$cfu/$cm^2$일 경우 검사시간은 13.5시간, 10.7시간, 7.8시간이었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권1호
• /
• pp.64-69
• /
• 1997

A study was conducted on the effects of ploughing on physiological responses of male and female Bali-cattle. A $2{\times}2{\times}6{\times}8$ factorial design (2 seasons, 2 sexes, 6 days and 8 consecutive time of measurements every 30 minutes) was employed. Responses during the cool/humid season were lower than hot/dry; respiration rate (RR) was 52 vs 75/min, rectal temperature(RT) was 39.1 vs $39.5^{\circ}C$ and skin temperature (ST) was 37.1 vs $37.6^{\circ}C$. Within sexes, males were less tolerant than females in that their RR (66 vs 61 breath/min), RT (39.4 vs $39.2^{\circ}C$) and ST (37.6 vs $37.1^{\circ}C$) were each higher than females during work. With increasing time, during the average 2.5 h working period gradual increases in RR, RT and ST were recorded and the overall increases of 84 breath/min, $1.9^{\circ}C$ and $13.8^{\circ}C$ respectively (p < 0.001). Packed cell volume (PCV) data indicated significant difference between sexes, time and season (p < 0.001, p < 0.05 and p < 0.001 respectively). Within time (before and after 2.5 h working) the PCV decreased from 27.4 to 25.6%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.356-359
• /
• 1997

The Effects of different melting temperature and holding time in the melting temperature on J$\sub$c/ of YBa$_2$Cu$_3$O$\sub$x/ based superconducting bulk using MPMG process were investigated. the value of critical current density was the largest at l120$^{\circ}C$, the melting temperature which is appointed to the mid point of (Y$_2$BaCuO$\sub$5/ + Liquid)region. With the melting temperature in which the value of J$\sub$c/ is the largest, J$\sub$c/ was again measured to see whether the holding time at this proper melting temperature has the effect on the critical characteristics. From the result above it was concluded that the melting temperature and holding time were important to improve the J$\sub$c/ and the formation of the Y$_2$BaCuO$\sub$5/. In this paper, the melting temperature obtained was l120$^{\circ}C$ and propel holding time could be obtained as 20 minute and the more holding time was not effective in the J$\sub$c/ improvement as well as the formation of Y$_2$BaCuO$\sub$5/.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.26-34
• /
• 1997

To develop ultrathin gate oxide for ULSI MOSFETs, for the first time, we fabricated MOS capacitors with 65.angs. thick initial oxide grown by high pressure oxidation (HIPOX) at 700.deg. C in 5 atmosphere $O_{2}$ ambient and then followed by rapid thermal nitridation (RTN) in N$_{2}$O ambient. The dielectric breakdown fields of the initial HIPOX oxide are 13.0 MV/cm and 13.8MV/cm for negative and positive gate bias, respectively and are dependent on nitridation temeprature and time.The lifetimes of the HIPOX oxides extractd by TDDB method are 1.1*10$^{8}$ sec and 3.4 * 10$^{9}$ sec for negative and positive stress current, respectively. The lifetime of the HIPOX oxide dfor negative stress current increases with nitridation time in N$_{2}$O ambient at 1100.deg.C, reaching maximum value stress curretn increases with nitridation time in N$_{2}$O ambient at 1100.deg. C reacing maximum value of 1.2*10$^{9}$ sec for 30 sec of nitridation time, and then subsequently decreases at the longer nitridation time. The lifetimes of the nitrided-HIPOX oxides are longer than 10 years when nitridations are carried out longer than about 50 sec and 12 sec at 1000.deg. C, and 1100.deg. C, respectively.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.582-587
• /
• 2006

Decomposition behavior of $ferro-Si_3N_4$was investigated with varying temperature and holding time in mud components for high temperature refractory applications. Porosities gradually increased with increasing temperature and holding time due to the carbothermal reduction of $Si_3N_4\;and\;SiO_2$. Silicon monoxide (SiO) as a intermediate resulted from evaporation of $Si_3N_4\;and\;SiO_2$ reacted with C sources to generate needle-like ${\beta}-SiC$ and Fe in $Si_3N_4$ acted as a catalyst in order to enhance growth of SiC grain with the preferred orientation. SiC generation yield increased with increasing holding time, all of the $Si_3N_4\;and\;SiO_2$ affected on SiC formation up to 2h. However, SiC generation was only dependent on residual $SiO_2$ over 2h, because the carbothermal reduction reaction of $Si_3N_4$ was no longer possible at that time.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• 대한인간공학회지
• /
• 제11권1호
• /
• pp.67-79
• /
• 1992

Cardiac systolic time intervals (STLs) and Heather index (HI) were used to access changes in left ventricular function of six male subjects exposed to postural changes,$0^{\circ}C$, ${\pm}2^{\circ}C$, ${\pm}45^{\circ}C$, ${\pm}90^{\circ}C$, Significant prolongation of the pre-ejection period (PEP) and PEP/ LVET ratio, shortening of the left ventricular ejection time (LVET), STI, HI and $1/PEP^{2}$were observed during exposure to both $+45^{\circ}C $ and $+90^{\circ}C $But the values measured during $-45^{\circ}C $ and$-90^{\circ}C $ were reversed. Changes in fluid shift, filling volume, preload, after load and sympathetic activities may account for the observed findings. Early response of cardiac foctions was recorded using impedance cardiography. This method is very simple but accurate. Thus it will be useful in this aerospace and work physiology. In conclusion, STIs appear to provide reliable noninvasive method for examining changes of cardiac function during exposure to postural changes.

• Journal of the Korean Wood Science and Technology
• /
• 제9권3호
• /
• pp.24-30
• /
• 1981

This experiment was carried out to determine the drying time from green to oven dry and estimate the moisture content of wood, such as red lauan (Shorea Spp.), Douglas fir (Pseudotsuga menziesii), Birch (Betula platyphylla), and oak (Quercus aliena), at various thickness, paralleled to fiber, of specimen for M.C. by oven dry method (100-105$^{\circ}C$). The results obtained are summarized as follows: 1. The drying time from green to oven dry decreases as the thickness of specimen for M.C. becomes to be thined, and that time at 10mm thickness are 14 hrs, for birch wood and 24 hrs, for oak wood. 2. The relative formulae between thickness (X) of specimen for M.C. and drying lime (Y) from 12% to oven dry are showed in Fig. 3. 3. The M.C. based on the weight of specimen for M.C. at t% can be obtained from the formula (2), and the drying time to 1% are shorter than that time to oven dry by approximately three times.

• Journal of Radiation Protection and Research
• /
• 제33권4호
• /
• pp.135-141
• /
• 2008

본 논문은 벼에 $^{14}CO_2$ 가스를 단기간 동안 직접 노출시켜 시간대 별 $^{14}C$의 전이 현상에 대한 동적 예측 모델과 동 모델의 타당성을 조사하기 위해 수행된 벼의 $^{14}CO_2$ 피폭 실험에 대해 기술하였다. 본 모델에서 작물은 몸체와 이삭(쌀알)의 두 격실로 구분되었고, 식물의 광합성과 연관된 매개변수의 함수로 표현되는 5개의 격실 간 탄소이동을 고려하였다. 모델예측을 통해 작물의 $^{14}C$ 방사능 오염에 대한 $^{14}CO_2$, 누출 시기 및 지속시간, 매개변수의 영향을 분석하였다. $^{14}CO_2$ 누출 지속시간이 길어지면 본 모델은 비 방사능 모델 적용 영역으로 수렴되었다. 작물의 $^{14}C$ 오염은 광합성이 가장 왕성한 개화기부터 수확기 사이에 작물이 $^{14}CO_2$에 노출되었을 때 가장 큰 것으로 예측되었다. $^{14}CO_2$에 대한 벼 노출 실험결과와 모델예측결과의 비교로부터 본 모델은 벼의 $^{14}C$ 흡수 예측 모델로 충분히 활용할 수 있음을 확인하였다.