• 대한미생물학회지
• /
• 제18권1호
• /
• pp.91-98
• /
• 1983

The effect of subcutanecus injection of Corynebacterium parvum($700{\mu}g$) on cellular and humoral immune responses when given at various time relative to sheep red blood cell(SRBC) sensitization were studied by the evaluation of Arthus, delayed-type hypersensitivity(DTH), rosette forming cell, hemagglutinin and hemolysin reactions. Arthus reactivity(3 hours) developed in control mice and test mice pretreated with C. parvum 8 days prior to intravenous sensitization with SRBC were similar. However, there was slight depression of reactivity when C. parvum was given subcutaneoutly(s.c.) 4 or 2 days prior to SRBC sensitization. Arthus reactivity was significantly depressed when C. parvum was given s.c. either at the same time as, or 2 days later than, antigen. DTH reaction was net depressed significantly when C. parvum was injected 8 or 2 days prior to SRBC sensitization or at the same time as antigen. In contrast DTH was significantly augmented when C. parvum given s.c. 4 days prier to SRBC sensitization. DTH was depressed when C. parvum was given s.c. 2 days after antigen. No significant change occurred in rosette forming percetages of spleen cell when C. parvum was given s.c. 8, 4 or 2 days before SRBC sensitization. In contrast, a significant reduction in percentages of rosette forming cell occurred when C. parvum was given s.c. either at the same time as, or 2 days later than, antigen. Serum hemaggulutinin and hemolysin titers were not significantly affected by subcutaneous injection of C. parvum regardless of time relative to SRBC sensitization. However, mercaptoethanol-resistant hemaggulutinin and hemolysin(IgG) titers were somewhat augmented when C. parvum was given 2 days after antigen. It is concluded from these results that depending on the time and route of inoculation, C. parvum can enhance or depress immune responses in mice, suggesting the time and route of C. parvum inoculation is an important point of concern about clinical use of C. parvum for the treatment of cancer.

• 식물병연구
• /
• 제14권3호
• /
• pp.219-222
• /
• 2008

C. gloeosporioides와 C. acutatum의 개체군 밀도분석을 위해 기존 ITS부위를 이용한 PCR방법에 사용한 caInt2와 cgint 프라이머에 형광을 표지하여 C. acutatum에 특이적인 fcaInt2와 C. gloeosporioides에 특이적인 vcgint의 두 probe를 제작하였다. 이 두개의 프라이머와 Unicof1, Unicor1 primer를 이용 real time PCR을 수행하였을 때 C. acutatum은 fcaInt2 probe에, C. gloeosporioides는 vcgint에 특이적인 형광증폭곡선을 나타냄에 따라 delta Rn 값을 비교함으로 두 종의 구분이 가능하였다.

• Wind and Structures
• /
• 제26권5호
• /
• pp.293-304
• /
• 2018

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

• 한국컴퓨터정보학회논문지
• /
• 제9권3호
• /
• pp.45-53
• /
• 2004

2-계층 C/S 시스템을 구성하는 경우 사용자의 응답시간이 길어지는 약점이 있다는 것이 기존의 C/S 시스템 개발자들에게는 잘 알려져 있으나 PDA등을 이용하여 모바일 환경을 제공하는 새로운 개발자들은 곧 잘 이러한 사실을 모르고 종래의 2-계층 방식으로 시스템을 구성하여 실패하는 경우가 있다. 2-계층 C/S 시스템은 개발이 용이하다는 장점을 제외하고는 응답시간, 응용프로그램의 설치. 보안, 확정성, 응용 프로그램의 재사용, 이기종 DBMS지원, 가용성 등에 많은 문제가 있다. 본 논문에서는 간단한 트랜잭션이 2-계층과 3-계층 C/S 시스템에서 작동할 때의 응답시간을 시뮬레이션 하여 분석한다. 비록 문제공간을 2-계층과 3-계층에 국한해서 시뮬레이션 했지만 도출된 결과는 다계층 시스템에서도 적용할 수 있을 것이다.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1241-1248
• /
• 1998

$\beta$-C2S and C4A3 were synthesized separately and potassium oxalate was added to each system. The ad-ditive caused calcium ions in solution to decrease at early time in hydration and promoted hydration reac-tion. And then clinker which is mainly composed of $\beta$-C2S and C4A3 was synthesized at 130$0^{\circ}C$ After ad-ding potassium oxalate to it behavior of hydration was observed. It showed that the additive promoted et-tringtie formation at early time and C-S-H formation as time went on.

• 산업공학
• /
• 제25권2호
• /
• pp.241-254
• /
• 2012

This paper studies the relationship between SCM(Supply Chain Management) metrics and corporate value (Tobin's Q) for manufacturing and wholesale/retail firms in Korea. Specifically, the multiple regression analysis is used to investigate the relationships 1) between inventory level, inventory turns, and days of inventory and Tobin's Q and 2) between cash-to-cash (C2C) cycle time including its components such as days of inventory, days sales outstanding, and days payable outstanding and Tobin's Q. The results indicate that there exist statistically significant negative relationships between inventory levels and days of inventory (DOI) and Tobin's Q. Also, we found that there exist commonly known negative correlations between days of raw materials inventory and days of work in process (WIP) inventory and Tobin's Q. For the C2C cycle time, we found that there -exists a statistically significant negative relationship between the C2C cycle time and Tobin's Q. Also, we found that there exist commonly known correlations between the two components of C2C cycle time and Tobin's Q such as the negative for DOI and days sales outstanding. This study clearly shows the negative relationship in general between inventory levels and corporate value and between C2C time and corporate value, and this kind of result has not been found by previous studies in Korea.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.327-333
• /
• 1998

The influence of slow cooling and annealing time in $O_2$in MPEG process on $J_c$ was investigated. From the measurement of $J_c$,SEM and XRD, it was observed that the critical current density was related with the slow cooling time and annealing time in $O_2$. The value of $J_c$ was the highest at slow cooling time of 40 hour. And also, the value of $J_c$ along the annealing time in $O_2$in the case of the slow cooling time of 40 hours was inclined to increase with annealing time. Consequently, it can be suggested that proper slow cooling time and annealing time after slow cooling in MPMG process be important to improve the critical characteristics.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.

• 열처리공학회지
• /
• 제10권1호
• /
• pp.63-70
• /
• 1997

A study was performed to examine the aging behaviors of Al-2.1Li-2.9Cu alloy by differential scanning calorimetry and transmission electron microscopy. DSC measurements were conducted over the temperature range of $25{\sim}550^{\circ}C$ at a heating rate of $5^{\circ}C$/min. for the specimens aged at 130, 160, $190^{\circ}C$ and $220^{\circ}C$ for various times after solution treatment at $540^{\circ}C$ for 30 minutes. The peaks due to the formation of G.P.zone were not detected in the specimens aged at 130 and $160^{\circ}C$, but those at 190 and $220^{\circ}C$ appeared in DSC curves. The heat absorption due to the dissolution of ${\delta}^{\prime}$ phase was increased with increasing aging time at $130^{\circ}C$ aging. In contrast, those values for the specimens aged at 160 and $190^{\circ}C$ were initially increased and inversely decreased at the transition time of 72 and 1 hour, respectively. The heat evolution due to the formation of $T_1$ phase was nearly unchanged at $130^{\circ}C$ aging, but at $160^{\circ}C$ and $190^{\circ}C$ aging, drastically decreased after the transition time. It can be considered that the increase of $T_1$ phase results in the decrease of ${\delta}^{\prime}$ phase when aging time is longer than the transition time. The hardness of the specimen aged at $190^{\circ}C$ is initially higher compared with that at $160^{\circ}C$, however, the peak hardness shows the lower value than that at $160^{\circ}C$.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.49-55
• /
• 2006

This study deals with the friction welding of SM25C and SCNCrM-2B; The friction time was variable conditions under the conditions of spindle revolution 2,000rpm, friction pressure of 100MPa, upset pressure of l50MPa, and upset time of 4.0 seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, and so the results were as follows. 1. When the friction time is 2.0 seconds, the tensile strength of friction welds was 874MPa, which is around as much as 117% of the tensile strength of base metal(SM25C), the bending strength of friction welds was 1,354MPa, which is around as much as 108.9% of the bending strength of base metal(SM25C). 2. At the same condition, the maximum vickers hardness was Hv443 at SCNCrM-2B nearby weld interface, which is higher Hv20 than condition of the friction time 0.5 seconds. 3. The results of microstructure analysis show that the structures of two base materials have fractionated and rearranged along a column due to heating and axial force during friction, which has affected in raising hardness and tensile strength.