• Journal of Korean Neurosurgical Society
• /
• v.52 no.2
• /
• pp.120-125
• /
• 2012

Objective : To investigate the feasibility of C1 lateral mass screw and C2 pedicle screw with polyaxial screw and rod system supplemented with miniplate for interlaminar fusion to treat various atlantoaxial instabilities. Methods : After posterior atlantoaxial fixation with lateral mass screw in the atlas and pedicle screw in the axis, we used 2 miniplates to fixate interlaminar iliac bone graft instead of sublaminar wiring. We performed this procedure in thirteen patients who had atlantoaxial instabilities and retrospectively evaluated the bone fusion rate and complications. Results : By using this method, we have achieved excellent bone fusion comparing with the result of other methods without any complications related to this procedure. Conclusion : C1 lateral mass screw and C2 pedicle screw with polyaxial screw and rod system supplemented with miniplate for interlaminar fusion may be an efficient alternative method to treat various atlantoaxial instabilities.

• The Journal of Korean Society of Virology
• /
• v.27 no.2
• /
• pp.105-113
• /
• 1997

The truncated $E1_{192-283}$ and $E2_{384-649}$ genes of hepatitis C virus (HCV) linked to the gene for glutathione S-transferase (GST) were constructed and their expressions were analyzed. The $GST-E1_{192-283}$ fusion gene overexpressed the fusion protein in E. coli as a soluble form, while the $GST-E1_{192-383}$ plasmid did not express expected fusion protein. The purified $GST-E1_{192-283}$ fusion protein was efficiently cleaved by thrombin. More than 90% pure, HCV $E1_{192-283}$ protein was obtained by GST-agarose chromatography. The truncated $GST-E2_{384-649}$ fusion gene expressed the fusion protein mainly as an insoluble form, whereas the $GST-E2_{384-740}$ did not express the fusion protein. The truncated $GST-E1_{182-283}$ and $GST-E2_{384-649}$ fusion proteins reacted specifically with an HCV patient serum. In addition, mice immunized with either the purified $E1_{192-283}$ or $GST-E2_{384-649}$ proteins generated specific antibodies to each antigen. The results suggested that hydrophobic carboxyl portions of the E1 and E2 proteins might affect expression levels as well as the solubility of each fusion protein in bacteria. Also, the truncated E1 protein with Tyr-192 to Ser-283 contained antigenic epitope(s) which could be specifically recognized by an HCV patient serum.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.199-205
• /
• 1998

Butt fusions were practiced with butt fusion in the various conditions of fusion temperatures, pressure and time, and the tests of tesile strength, breaking water pressure and fusion features were also practiced so that the reliability of the butt fusion and the fittets fusion condition may be closely examined. And the width, height and thickness of the beads were also closely measured. The fittest fusion result was achieved in the condition of the temperature of $210^{\circ}C$, heating time hight pressure of 14 seconds on the pressure of $1.5kg/cm^2$, heating time hight pressure of 100 seconds and pressure buid-up time of 11 seconds. And in case of the temperature of $250^{\circ}C$, the fittest fusion result was showed in the condition of the heating time hight pressure of 3 seconds on the pressure of 1.0$kg/cm^2$, the heating time low pressure variable of 100 seconds. heating time hight pressure of 14 seconds and the heating maintenance of around 60 seconds. The result of breaking water pressure test of a test piece fusion in the fittest fusion condition was that the fusion condition of the PE pipe showed a good stability and hight reliance. Through this test, it is proved that the temperature of fusion PE pipes can be increased to $250^{\circ}C$ from $210^{\circ}C$. And it can be expected that the above fusion method greatly helps to reduce the fusion time.

• BMB Reports
• /
• v.46 no.12
• /
• pp.606-610
• /
• 2013

Glucagon like peptide-1 (GLP-1) regulates glucose mediated-insulin secretion, nutrient accumulation, and ${\beta}$-cell growth. Despite the potential therapeutic usage for type 2 diabetes (T2D), GLP-1 has a short half-life in vivo ($t_{1/2}$ <2 min). In an attempt to prolong half-life, GLP-1 fusion proteins were genetically engineered: GLP-1 human serum albumin fusion (GLP-1/HSA), AGLP-1/HSA which has an additional alanine at the N-terminus of GLP-1, and AGLP-1-L/HSA, in which a peptide linker is inserted between AGLP-1 and HSA. Recombinant fusion proteins secreted from the Chinese Hamster Ovary-K1 (CHO-K1) cell line were purified with high purity (>96%). AGLP-1 fusion protein was resistant against the dipeptidyl peptidase-IV (DPP-IV). The fusion proteins activated cAMP-mediated signaling in rat insulinoma INS-1 cells. Furthermore, a C57BL/6N mice pharmacodynamics study exhibited that AGLP-1-L/HSA effectively reduced blood glucose level compared to AGLP-1/HSA.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.55-62
• /
• 2016

Objectives: The purpose of this study was to investigate the incidence of root fusion and C-shaped root canals in maxillary molars, and to classify the types of C-shaped canal by analyzing cone-beam computed tomography (CBCT) in a Korean population. Materials and Methods: Digitized CBCT images from 911 subjects were obtained in Chosun University Dental Hospital between February 2010 and July 2012 for orthodontic treatment. Among them, a total of selected 3,553 data of maxillary molars were analyzed retrospectively. Tomography sections in the axial, coronal, and sagittal planes were displayed by PiViewstar and Rapidia MPR software (Infinitt Co.). The incidence and types of root fusion and C-shaped root canals were evaluated and the incidence between the first and the second molar was compared using Chi-square test. Results: Root fusion was present in 3.2% of the first molars and 19.5% of the second molars, and fusion of mesiobuccal and palatal root was dominant. C-shaped root canals were present in 0.8% of the first molars and 2.7% of the second molars. The frequency of root fusion and C-shaped canal was significantly higher in the second molar than the first molar (p < 0.001). Conclusions: In a Korean population, maxillary molars showed total 11.3% of root fusion and 1.8% of C-shaped root canals. Furthermore, root fusion and C-shaped root canals were seen more frequently in the maxillary second molars.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.3
• /
• pp.354-363
• /
• 2024

Objective : This study aims to determine the optimal dose of recombinant-human bone morphogenic protein-2 (rhBMP-2) for successful bone fusion in minimally invasive lateral lumbar interbody fusion (MIS LLIF). Previous studies show that rhBMP is an effective alternative to autologous iliac crest bone graft, but the optimal dose remains uncertain. The study analyzes the fusion rates associated with different rhBMP doses to provide a recommendation for the optimal dose in MIS LLIF. Methods : Ninety-three patients underwent MIS LLIF using demineralized bone matrix (DBM) or a mixture of rhBMP-2 and DBM as fusion material. The group was divided into the following three groups according to the rhBMP-2 usage : group A, only DBM was used (n=27); group B, 1 mg of rhBMP-2 per 5 mL of DBM paste (n=41); and group C, 2 mg of rhBMP-2 per 5 mL of DBM paste (n=25). Demographic data, clinical outcomes, postoperative complication and fusion were assessed. Results : At 12 months post-surgery, the overall fusion rate was 92.3% according to Bridwell fusion grading system. Groups B and C, who received rhBMP-2, had significantly higher fusion rates than group A, who received only DBM. However, there was no significant increase in fusion rate when the rhBMP-2 dosage was increased from group B to group C. The groups B and C showed significant improvement in back pain and Oswestry disability index compared to the group A. The incidence of screw loosening was decreased in groups B and C, but there was no significant difference in the occurrence of other complications. Conclusion : Usage of rhBMP-2 in LLIF surgery leads to early and increased final fusion rates, which can result in faster pain relief and return to daily activities for patients. The benefits of using rhBMP-2 were not significantly different between the groups that received 1 mg/5 mL and 2 mg/5 mL of rhBMP-2. Therefore, it is recommended to use 1 mg of rhBMP-2 with 5 mL of DBM, taking both economic and clinical aspects into consideration.

• Toxicological Research
• /
• v.12 no.2
• /
• pp.155-161
• /
• 1996

The enzymatic properties for NADPH-P450 reductase domain of a fusion protein between human cytochrome P450 1A1 and rat NADPH-P450 reductase expressed in Escherichia coli were investigated. The fusion plasmid pCW/1A1OR-expressed E. coli membrane showed high NADPH-cytochrome c reductase activity ($830.1\pm 85.8 nmol\cdot min^{-1}\cdot mg protein^{-1}$), while pCW control vector and P 450 1A1 expression vector pCW/1A1 showed relatively quite low activity ($4.35\pm 0.49, 3.27\pm 0.50 nmol\cdot min^{-1}\cdot mg protein^{-1}$, respectively). The kinetic curves for NADPH-cytochrome c reductase followed typical Michaelis-Menten kinetics. The $K_{max}$ and $V_{max}$ for NADPH-dependent reductase activity were $8.24\pm 2.61\mu $and $817.9\pm 60.8 nmol\cdot min^{-1}\cdot mg protein^{-1}$, respectively, whereas those for cytochrome c-dependent reductase activity were $19.97\pm 2.86\mu M$ and $1303.5\pm 67.1 nmol\cdot min^{-1}\cdot mg protein^{-1}$. The reductase activities were also compared with those of rat, porcine and human liver microsomes. The activity of pCW/ 1A1OR-expressed E. coli membrane was 15.2-fold higher than that of rat liver microsome. Treatment with benzo(a)pyrene, 7-ethoxyresorufin and $\alpha$-naphthofiavone which are known as specific substrates or inhibitor for human P450 1A1 increased NADPH-cytochrome c reductase activity of fusion protein in E. coli membrane dose-dependently. These results demonstrate that the membrane topology of fused enzyme may be important for activity of its NADPH-P450 reductase domain.

• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.482-487
• /
• 2009

In order to investigate the effects of intermediate heat treatment between cold rolling passes on the hardness and corrosion properties of a Zr alloy incorporating Nb (Zr-1.49Nb-0.38Sn-0.20Fe-0.11Cr) strip, three different intermediate heat treatment processes ($580^{\circ}C{\times}4hrs$, $600^{\circ}C{\times}2hrs$ and $620^{\circ}{\times}1hrs$) were designed based on a recrystallization map and an accumulated annealing parameter. Test samples from the different processes were investigated by a hardness test, corrosion test, and microstructure analysis and appropriate heat-treatment conditions were thereupon proposed. The sample subjected to an intermediate heat treatment of $580^{\circ}C{\times}4hrs$ was harder than that undergoing $600^{\circ}C{\times}2hrs$ and $620^{\circ}C{\times}1hr$ while the corrosion resistance of the sample that received an intermediate heat treatment of $580^{\circ}C{\times}4hrs$ was superior to that of the other specimens. Considering the trade-off of hardness and corrosion resistance, an intermediate heat treatment process of $600^{\circ}C{\times}2hrs$ is proposed to improve the manufacturing process of the alloy strip.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.1
• /
• pp.39-43
• /
• 2005

Objective: For Posterior lumbar interbody fusion(PLIF) various cages or iliac bone dowels are used with or without pedicle screw fixation(PSF). To evaluate and compare the clinical and radiological results of different fusion methods, we intend to verify the effect of added PSF on PLIF, the effect of bone cages and several factors which are thought to be related with the postoperative prognosis. Methods: One hundred and ninety seven patients with lumbar spinal stenosis and instability or spondylolisthesis underwent various fusion operations from May 1993 to May 2003. The patients were divided into five groups, group A (PLIF with autologous bone dowels, N=24), group B (PLIF with bone cages, N=13), group C (PLIF with bone dowels and PSF, N=37), group D (PLIF with bone cages and PSF, N=30) and group E (PSF with intertransverse bone graft, N=93) for comparison and analyzed for the outcome and fusion rate. Results: Outcome was not significantly different among the five groups. In intervertebral height (IVH) changes between pre- and post-operation, Group B ($2.42{\pm}2.20mm$) was better than Group A ($-1.33{\pm}2.05mm$). But in the Group C, D and E, the IVH changes were not different statistically. Fusion rate of group C, D was higher than that of Group A and B. But the intervertebral height(IVH) increased significantly in group B($2.42{\pm}2.20mm$). Fusion rate of group C and D were higher than that of group A and D. Conclusion: Intervertebral cages are superior to autologous iliac bone dowels for maintaining intervertebral height in PLIF. The additional pedicle screw fixation seems to stabilize the graft and improve fusion rates.

• Korean Journal of Microbiology
• /
• v.26 no.1
• /
• pp.37-43
• /
• 1988

This research was focused on investigation of the condition for protoplast formation and regeneration of protoplast fusion between Saccharomyces cerevisiae which has fermentation ability and Candida cariosilignicola which can grow at high temperature and utilize methanol. The results obtained were as follows; The highest production was collected in exponential growth phase. Ninety-nine% protoplast formation of C. cariosilignicola was obtained in glycin-NaOH buffer (pH10.0) containing Zymolyase 0.5mg/ml at $35^{\circ}C$ for 1hr incubation. The highest regeneration was produced when protoplast wuwpension containing 0.5% soft agar in buffered 50mM $CaCl_{2}$ was poured as a soft overlay onto 2% agar plates. Equal amuont of protoplast suspension of two strains was mixed and centrifuged. The subsequent pellet was added to 2ml of 35% polyethylene glycol (MW 4,000) containing 50mM $CaCl_{2}$, and incubated at $30^{\circ}C$ for 10min. Then 0.1ml of the suspension of aggregated protoplast was immediately covered with minimal medium and incubated at $40^{\circ}C$ for 5-7 days. As results, $SC_{1}$, $SC_{2}$, and $SC_{3}$ fusants were obtained. The physiological characteristics of fusants produced by protoplast fusion were; $SC_{1}$, and $SC_{2}$ utilized maltose, galactose, methanol, potassium nitrate. $SC_{3}$ utilized all the above materials except galactose.