• 제목/요약/키워드: C1-2

검색결과 67,367건 처리시간 0.147초

High resolution flexible e-paper driven by printed OTFT

  • Hu, Tarng-Shiang;Wang, Yi-Kai;Peng, Yu-Rung;Yang, Tsung-Hua;Chiang, Ko-Yu;Lo, Po-Yuan;Chang, Chih-Hao;Hsu, Hsin-Yun;Chou, Chun-Cheng;Hsieh, Yen-Min;Liu, Chueh-Wen;Hu, Jupiter
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.421-427
    • /
    • 2009
  • We successfully fabricated 4.7-inch organic thin film transistors array with $640{\times}480$ pixels on flexible substrate. All the processes were done by photolithography, spin coating and ink-jet printing. The OTFT-Electrophoretic (EP) pixel structure, based on a top gate OTFT, was fabricated. The mobility, ON/OFF ratio, subthreshold swing and threshold voltage of OTFT on flexible substrate are: 0.01 ^2/V-s, 1.3 V/dec, 10E5 and -3.5 V. After laminated the EP media on OTFT array, a panel of 4.7-inch $640{\times}480$ OTFT-EPD was fabricated. All of process temperature in OTFT-EPD is lower than $150^{\circ}C$. The pixel size in our panel is $150{\mu}m{\times}150{\mu}m$, and the aperture ratio is 50 %. The OTFT channel length and width is 20 um and 200um, respectively. We also used OTFT to drive EP media successfully. The operation voltages that are used on the gate bias are -30 V during the row data selection and the gate bias are 0 V during the row data hold time. The data voltages that are used on the source bias are -20 V, 0 V, and 20 V during display media operation.

  • PDF

천연가스의 탄화수소 이슬점 측정방법 비교 연구 (A Study on the Comparison of Methods for the Measurement of Hydrocarbon Dew Point of Natural Gas)

  • 이강진;하영철;허재영;우진춘;김용두;배현길
    • Korean Chemical Engineering Research
    • /
    • 제53권4호
    • /
    • pp.496-502
    • /
    • 2015
  • 탄화수소 이슬점은 천연가스 응축형태를 특성화하는 가장 일반적이고 자주 이용되는 물성으로 가스 품질 사양의 중요한 항목이다. 탄화수소 이슬점은 미량의 고탄화수소 성분에도 매우 민감한 것으로 알려져 있어, 특히 천연가스를 공급하는 가스 회사 입장에서는 기존 합의된 가스 사양을 만족하는 것 뿐만 아니라, 발생된 탄화수소 응축물에 의해 운영설비 및 안전에 심각한 문제를 일으킬 수 있으므로 탄화수소 이슬점을 정확하게 구하는 절차를 확립하는 것이 중요하다. 본 연구에서는 실제 현장조건 하에서 탄화수소 이슬점을 측정하기 위해 냉각 거울 방식의 이슬점 측정기를 설치, 운영하였으며, 측정된 이슬점 온도는 가스분석기에 의해 분석된 조성 및 천연가스 산업계에서 인정된 상태방정식을 이용하여 계산된 이슬점 온도와 비교하였다. 시험 결과 탄화수소 이슬점 측정기는 매우 안정되게 이슬점을 측정하였으며, 이슬점 측정기를 검증하기 위한 시험 가스로는 순수 프로판 가스가 적정하였다. 제조 표준가스 및 실제가스의 측정결과를 가스분석기에 의한 간접 측정 결과와 비교시에도 적정한 범위 내에서 일치하는 것을 확인하였다.

아치형 단동온실의 지붕환기구조 및 천창효과 (Roof Ventilation Structures and Ridge Vent Effect for Single Span Greenhouses of Arch Shape)

  • 남상운
    • 농업과학연구
    • /
    • 제28권2호
    • /
    • pp.99-107
    • /
    • 2001
  • 온실재배에 있어서 가장 경제적인 환경조절방법은 자연환기에 의한 것이므로 온실의 자연환기 성능을 극대화하는 것은 매우 중요하다. 온실의 자연환기 성능을 극대화하기 위해서는 지붕환기창의 설치가 중요한데, 아치형 단동 온실의 경우에는 천창을 설치하기 어려운 구조로 되어 있어서 대부분의 농가가 측창만 설치하여 운영하고 있다. 본 연구에서는 아치형 단동 온실의 지붕에 환기창 설치를 장려하기 위한 일환으로 사례조사와 효과분석을 실시하였다. 아치형 단동 온실의 지붕환기구조 실태조사 결과 폭 5~8m의 소형 온실에서는 플라스틱으로 제작된 원형 및 굴뚝형 환기창을, 폭 12~18m의 대형온실에서는 철재 파이프를 덧붙인 양권취식을 많이 사용하고 있었다. 지붕환기창 설치 온실과 관행의 권취식 측창만 설치된 온실에 대한 대조 실험 결과 비록 적은 면적의 지붕환기창을 설치하였지만 온도하강 $1^{\circ}C$ 이상의 천창 환기 효과가 있었으며, 지붕환기를 실시함으로써 온도분포를 보다 균일하게 할 수 있는 것으로 나타났다. 지붕환기창을 설치함으로서 얻을 수 있는 온도상승 억제효과는 일사량과 풍속조건에 따라 뚜렷한 차이를 보이며, 풍속이 낮은 경우에 효과가 커지는 것을 확인할 수 있었다. 환기창의 개폐순서에 따른 전체적인 온도 하강의 차이는 없으나, 환기로 온도를 제어하는 경우에는 실내온도가 설정온도보다 높을 때는 천창을 열은 후 측창을 열고, 반대의 경우에는 측창을 닫은 후 천창을 닫는 것이 바람직한 것으로 판단되었다.

  • PDF

토로이드형 분말코어의 Major B-H Loop 측정 (Major B-H Loop Measurement of Toroidal Shape Magnetic Powder Core)

  • 손대락
    • 한국자기학회지
    • /
    • 제24권3호
    • /
    • pp.76-80
    • /
    • 2014
  • 토로이드 형태의 자성분말합금 코어의 경우 major B-H loop을 측정하기 위해서는 수십 kA/m 이상의 높은 자화력을 인가하여야 한다. 이 경우 측정과정에서 일차코일에 권선된 에나멜 동선에서 발생하는 열 때문에 측정이 매우 어렵다. 본 연구에서는 토로이드 형태의 자성분말합금 코어 major B-H loop을 직접 측정할 수 있는 장치를 설계 제작하고, 그 성능을 측정하였다. 수십 kA/m 이상의 자화력을 인가하기 위하여 최대 전류가 $100A_P$인 전력 증폭기와 측정 시간 중에 높은 전류에 의하여 코일 권선에서 발생하는 열 문제를 해결하기 위하여 실시간으로 자기 이력 곡선을 측정 할 수 있게 실시간으로 B-H 신호를 디지털신호로 변환하여 컴퓨터 소프트웨어에서 자속밀도 B 와 자화력 H 값을 계산하고, 이 값들로 부터 주요 자기 특성인 최대자속밀도 $B_{max}$, 최대 자화력 $H_{max}$, 보자력 $H_c$, 잔류자속밀도 $B_r$ 및 형상인자(FF)를 계산하여 가상계측기(VI)창으로 표시 할 수 있게 하였다. 제작된 장치를 이용하여 외경이 134 mm, 내경이 77 mm, 높이가 42 mm인 자성분말코어에 일차 코일을 직경이 1 mm인 에나멜 동선을 401회 권선하고 이차 코일을 직경이 0.2 mm인 에나멜 동선 5회 권선하여 측정을 하여 본 결과 최대 인가 자기장을 50 kA/m까지 인가하면서 자기이력곡선을 측정 할 수 있었다.

Dental Hygienist Coordination System 개발 교육주제 요구조사 (A Survey on the Demand of Education topic for the Development of Dental Hygienist Coordination System)

  • 이윤정;우희선
    • 치위생과학회지
    • /
    • 제10권5호
    • /
    • pp.349-356
    • /
    • 2010
  • 의료시장의 개방과 더불어 의료기관의 경쟁력확보를 위한 핵심전략으로 환자관리의 중요성이 강조되고 있다. 이 연구는 치과위생사의 업무능력향상과 전문성을 높이기 위해 수행업무인식과 교육요구주제를 조사 분석하여 Dental Hygienist Coordination System을 개발하는데 기초자료로 활용하고자 수행하였다. 비례표본추출법을 이용하여 광주광역시 85개 치과의원에 근무하는 치과위생사 156명을 대상으로 직접 방문하여 설문법을 이용하여 조사 분석한 바, 다음과 같은 결론을 얻었다. 1. 코디네이터교육경험 유무에 따른 교육과정별 우선순위 요구과목으로 서비스분야에서는 코디네이터이론과 실무(유무:상담 및 교육실무), 코디네이터를 위한 기초(유무:의학용어), 코디네이터를 위한 원무관리(유무:건강보험), 시설 및 환경관리(유:환경관리, 무:감염관리)이고, 매니저분야에서는 의료서비스마케팅(유무:의료환경과 고객특성, 의료서비스마케팅), 조직인사관리(유무:병원조직), 회계 및 재무관리(유무:병원회계), 건강보험실무(유:진료비청구관리, 무:진료비산정)으로 조사되었다(p>0.05). 2. 코디네이터교육경험 유무에 따른 교육요구과목 차이를 분석한 결과, 코디네이터이론과 실무 0.14, 건강보험실무와 의료서비스마케팅 0.13이고, 인사관리 - 0.23, 코디네이터를 위한 의료기초 -0.19로 조사되었다(p>0.05). 3. 코디네이터교육경험 유무에 따른 교육요구주제는 경험자군과 비경험자군 모두 상담 및 교육실무로 나타났으며, 교육경험자군과 비교육경험자군의 차이를 보면 고객접점관리 0.25, 고객응대기법 0.24로 조사되었다(p>0.05). 이상과 같은 결론에서 우선순위가 높은 교육과목인 코디네이터 이론과 실무, 건강보험 실무에서 진료비 청구관리를 중심으로 체계적인 교육과정을 포함한 Dental Hygienist Coordination System(D.H.C.S)개발에 필요한 근거자료로 활용될 수 있을 것으로 사료된다.

충남지역 중학생의 채소 섭취실태와 식습관에 관한 연구 (A Study on Vegetable Intakes and Dietary Habits of Middle School Students in Chungnam)

  • 조현선;김명희;최미경
    • 대한지역사회영양학회지
    • /
    • 제15권4호
    • /
    • pp.525-535
    • /
    • 2010
  • The purpose of this study was to provide basic data for nutritional education for juveniles' desirable vegetable intake by analyzing their vegetable intake, dietary habit and nutrient intakes according to gender of middle school students in Chungnam. The average age of the subjects was 15.0, height was 162.5 cm, weight was 53.5 kg and their average BMI was $20.1kg/m^2$. The frequency of eating supper in girls was lower than that in boys. Many respondents answered that a meal-time was 10~20 minutes. Without gender difference, more than 90% respondents thought that vegetables were good for health. As for the preference of vegetable, subjects responded, "I am in the middle", "I like them", "I dislike them", "I like them very much", and "I dislike them very much" in order, without gender difference. The frequent eaten leaf vegetable was Chinese cabbage, the frequent eaten fruit vegetable was cucumber, and the frequent eaten root vegetable was radish. The favorite leaf vegetable was lettuce, the favorite fruit vegetable was corn, and the favorite root vegetable was sweet potato. The preference degrees of taro and ginger were very low. The reasons why they liked a vegetable were that it was delicious and they ate it at home often. In addition, the reason why they disliked vegetables was that they are untasty in flavor or texture and it showed that many students had a prejudice that vegetables were untasty. The intakes of plant protein, dietary fiber, ash and INQs of dietary fiber, calcium, vitamin C, folate, vitamin E in the group with high preference of vegetables were significantly higher than those of low preference group. The study results indicate that intake frequency and preference of root vegetables in juveniles are low and the major reasons of these results are taste and eating experience of vegetables. In addition, the intake amounts of dietary fiber and folate are poor in the subjects with low preference of vegetables. Therefore, families and schools should make efforts that juveniles can recognize the importance of vegetable intake and select various vegetables properly through the development of cooking methods and systematic nutrition education.

치근활택술과 Tetracycline fiber적용의 임상적 효과 (The Clinical Effect of Tetracycline Fiber used in conjuction with Root Planing)

  • 조규성;류동현;서종진;최성호;채중규;김종관
    • Journal of Periodontal and Implant Science
    • /
    • 제28권3호
    • /
    • pp.389-401
    • /
    • 1998
  • In this study, 21 patients diagnosed as adult periodontitis were divided into 4 groups. One quadrant with an average of 6mm deep pocket depth was chosen from each individual - Group A inserted tetra-cycline fiber after removing supragingival calculus while group RP had calculus removal and root planning alone. Group RP+A received combination of these treatments while group C received none. Plaque index, bleeding on probing, pocket depth, attachment level, and distribution of subgingival plaque were compared and evaluated among these groups at periods of first visit, 4th week and 8th week. The results were as follows ; 1. Plaque index and bleeding on probing improved after treatment and no significant difference was found between the groups. 2. When comparing the change in pocket depth between the groups, the use of tetracycline fiber showed significant reducton in pocket depth comparable to root planing. Combined therapy of tetracycline fiber and root planing showed synergistic effect in pocket depth reduction. 3. When comparing the change in attachment level between the groups, the use of tetracycline fiber showed significant increase in clinical attachment level comparable to root planing, but no synergistic effect was found in the combined therapy. 4. When comparing the change in the motile bacteria ratio between the groups, group RP and group RP+A showed significant decrease compared with control group. 5. There were no severe adverse effects from using tetracycline fiber, except for a few patient who experienced mild discomfort. In summary, the use of local adminstration of tetracycline fiber in adjunction to mechenical treatment can be effective for adult periodontitis.

  • PDF

Numerical Simulation of Cavitating Flows on a Foil by Using Bubble Size Distribution Model

  • Ito, Yutaka;Nagasaki, Takao
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.216-227
    • /
    • 2004
  • A new cavitating model by using bubble size distribution based on bubbles-mass has been proposed. Both liquid and vapor phases are treated with Eulerian framework as a mixture containing minute cavitating bubbles. In addition vapor phase consists of various sizes of vapor bubbles, which are distributed to classes based on their mass. The bubble number-density for each class was solved by considering the change of the bubble-mass due to phase change as well as generation of new bubbles due to heterogeneous nucleation. In this method, the bubble-mass is treated as an independent variable, and the other dependent variables are solved in spatial coordinates and bubble-mass coordinate. Firstly, we employed this method to calculate bubble nucleation and growth in stationary super-heated liquid nitrogen, and bubble collapse in stationary sub-cooled one. In the case of bubble growth in super-heated liquid, bubble number-density of the smallest class based on its mass is increased due to the nucleation. These new bubbles grow with time, and the bubbles shift to larger class. Therefore void fraction of each class is increased due to the growth in the whole class. On the other hand, in the case of bubble collapse in sub-cooled liquid, the existing bubbles are contracted, and then they shift to smaller class. It finally becomes extinct at the smallest one. Secondly, the present method is applied to a cavitating flow around NACA00l5 foil. Liquid nitrogen and liquid oxygen are employed as working fluids. Cavitation number, $\sigma$, is fixed at 0.15, inlet velocities are changed at 5, 10, 20 and 50m/s. Inlet temperatures are 90K in case of liquid nitrogen, and 90K and 1l0K in case of liquid oxygen. 110K of oxygen is corresponding to the 90K of nitrogen because of the same relative temperature to the critical one, $T_{r}$=$T/T_c^{+}$. Cavitating flow around the NACA0015 foils was properly analyzed by using bubble size distribution. Finally, the method is applied to a cavitating flow in an inducer of the LE-7A hydrogen turbo-pump. This inducer has 3 spiral foils. However, for simplicity, 2D calculation was carried out in an unrolled channel at 0.9R cross-section. The channel moves against the fluid at a peripheral velocity corresponding to the inducer revolutions. Total inlet pressure, $Pt_{in}$, is set at l00KPa, because cavitation is not generated at a design point, $Pt_{in}$=260KPa. The bubbles occur upstream of the foils and collapse between them. Cavitating flow in the inducer was successfully predicted by using the bubble size distribution.

  • PDF

생쥐 초기배아와 사람의 수정란의 발생에 미치는 생식수관 상피세포의 영향에 관한 연구 (The Effects of the Epithelial Cells of Genital Tract on the Development of Mouse Early Embryos and Human Fertilized Oocytes)

  • 이호준;변혜경;김정욱;황정혜;전종영;김문규
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제21권3호
    • /
    • pp.315-323
    • /
    • 1994
  • Mammalian oviductal epithelial cells have been known to improve in vitro fertilization and embryonic development. Recently, co-cultured human embryos with the epithelial cells in human genital tract has been reported to improve the pregnancy rate. The purpose of the study was to investigate the effects of the epithelial cells of human genital tract on the development of mouse early embryos and human fertilized oocytes. The epithelial cells of human genital tract were collected from the fallopian tubes which were obtained during hysterectomy in fertile women and from the endometrium during endometrium biopsy. Collected human ampullary cells(HACs) and endometrial cells(HECs) were cultured for 10 days to establish primary monolayer. Second passaged HACs and HECs were obtained by trypsinization were cryopreserved in PBS with 1.5 M DMSO for later use. To investigate the effect when co-cultured with HACs and HECs, we tried to apply strict quality control on mouse embryo, from two cell to blastocyst prior to human trial. The results of quality control were as follows; In Group I (Ham's F10 with 10% FCS), Group IT (co-cultured with HACs) and Group ill (co-cultured with HECs), developmental rates to blastocyst were 63.3%(253/400), 76.0%(304/ 400),74.0%(296/400), respectively. Hatching rates were 36.8%(147/400), 41.80/0(167/400), 38.0%(152/400), respectively(p<0.05). To perform the human IVF, cryopreserved HACs were thawed at 37$^{\circ}C$ waterbath, seeded on the well dish and cultured for 48 hI'S. The pronuclear stage embryos were transferred to the seeded well dish. After 24 hRS, co-cultured embryos were examined and transferred to patient's uterus. The results of human IVF when co-cultured with HACs were that fertilization and developmental rates were 61.8% (256/414), 95.3% (244/256) as compared with 57.2% (279/488) and 94.6%(264/279) in Ham's F10 supplemented with 10% FCS(control). However, 62.9% (161/256) of co-cultured human embryos showed good embryos(no or slight fragmentation) as compared with 53.8 % (150/279) in control(p < 0.05). Pregnancy rate was 40.0% (12/30) when co-cultured with HACs whereas 30.6%(11/36) in control. In conclusions, co-culture system using HACs and HECs improved the developmental and hatching rates of mouse embryo. Also, in human IVF system when co-cultured with HACs, it improved both the quality of human embryos and the pregnancy rate.

  • PDF

교대배열 PVA 젤 섬유를 이용한 고분자 색전 코일 제조 (Preparation of Coil-Embolic Material Using Syndiotactic Poly(vinyl alcohol) Gel Spun Fibers)

  • 서영호;오태환;한성수;주상우;길명섭
    • 폴리머
    • /
    • 제37권4호
    • /
    • pp.486-493
    • /
    • 2013
  • 고분자 색전 코일을 제조하기 위하여 교대배열 PVA(s-PVA) 용액을 제조하고 젤방사 조건의 최적화를 위해 고분자용액의 유변학적 특성을 분석하였다. 현탁중합을 통해 비누화도 99%, 교대배열기 함량 56%인 s-PVA를 제조하였고 고분자 용액의 농도에 따른 점도 변화 측정을 통해 최적의 방사농도를 13 wt%로 선정하였다. S-PVA 젤 섬유의 연신비에 따른 구조, 형태, 인장 특성을 측정하였다. S-PVA 젤 섬유의 연신비가 증가함에 따라 인장강도가 증가하였고, 최대 연신비인 15배 연신하였을 때 인장강도는 580 MPa이었고 절단신도는 연신비가 증가함에 따라 감소하는 경향을 나타냈다. S-PVA 젤 섬유는 연신비에 따라 결정구조가 발달하고 배향도가 증가하는 경향을 나타내었다. 색전 코일 제조 시의 열처리온도에 따른 코일의 형태 안정성을 살펴 본 결과 열처리온도가 높을수록 코일의 형태안정성이 우수하였으며 금속 색전 코일로 제조되는 1차 코일 및 2차 코일 형태를 s-PVA 섬유를 이용해 제조하였고 이를 통해 금속 색전 코일의 고분자로의 대체 가능성을 확인하였다.