• Journal of the Korean Society of Food Culture
• /
• v.22 no.6
• /
• pp.827-832
• /
• 2007

This study was carried out to develop and characterize a drinking extract of disk abalone to keep the price level and to raise a added value of disk abalone. Fresh raw disk abalone was composed of 29.3% of the shell part, 17.7% of the intestinal part, and 43.9% of the flesh part. and the amount of nutritive substances in the intestinal part were higher those in the flesh part. Arginine was the most abundant amino acid both in raw and drinking extract of disk abalone. Drinking extract prepared with 250 g of the flesh of disk abalone at $100^{\circ}C$ for 2 hours was better in color and overall taste than those made with 150 g or 200 g of the flesh. As the extracting temperature was gradually increased or the extracting period was gradually extended, the extracting effect was slightly improved but the color of the extract turned out to undesirable one. The desirable sea tangle extract could be made when 15 g of sea tangle was extracted in 1 l of water at $100^{\circ}C$ for 2 hours, and which was accorded well with the color of drinking abalone extract. From these results the best drinking extract of disk abalone can be manufactured with 250 g of the abalone flesh extracted in 1 l of water at $100^{\circ}C$ for 2 hours.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.728-733
• /
• 2009

Cu based amorphous ($Cu_{54}Zr_{22}Ti_{18}Ni_{6}$) powders were deposited onto Al 6061 substrates by cold spray process with different powder preheating temperatures (below glass transition temperature: $350^{\circ}C$, near glass transition temperature: $430^{\circ}C$ and near crystallization temperature: $500^{\circ}C$). The microstructure and macroscopic properties (hardness, wear and corrosion) of Cu based amorphous coating layers were also investigated. X-ray diffraction results showed that cold sprayed Cu based amorphous coating layers of $300{\sim}350{\mu}m$ thickness could be well manufactured regardless of powder preheating temperature. Porosity measurements revealed that the coating layers of $430^{\circ}C$ and $500^{\circ}C$ preheating temperature conditions had lower porosity contents (0.88%, 0.93%) than that of the $350^{\circ}C$ preheating condition (4.87%). Hardness was measured as 374.8 Hv ($350^{\circ}C$), 436.3 Hv ($430^{\circ}C$) and 455.4 Hv ($500^{\circ}C$) for the Cu based amorphous coating layers, respectively. The results of the suga test for the wear resistance property also corresponded well to the hardness results. The critical anodic current density ($i_{c}$) according to powder preheating temperature conditions of $430^{\circ}C$, $500^{\circ}C$ was lower than that of the sample preheated at $350^{\circ}C$, respectively. The higher hardness, wear and corrosion resistances of the preheating conditions of near $T_{g}$ and $T_{x}$, compared to the properties of below $T_{g}$, could be well explained by the lower porosity of coating layer.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1552-1554
• /
• 1997

In this paper, thin films of PI were fabricated VDPM of dry processes which are easy to control the film's thickness and hard to pollute due to volatile solvents. From FT-IR, PAA thin films fabricated by VDP were changed to PI thin films by thermal curing. From AFM and ellipsometer experimental, the higher curing temperature is, the films thickness decreases and reflectance increases. Therefore, PI could be fabricated stable by increasing curing temperature.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1361-1362
• /
• 2006

In this research We investigated the effect of UV/O3, $O_3$ treatments of Indium-tin oxide(ITO) surface on the performance of organic light emitting devices(OLEDs). The fundamental structure of OLEDs was ITO(anode) / TPD(Hole Transport Layer) / $Alq_3$ / Al(cathode). We performed UV/O3, $O_3$ treatments and found that both treatments enhanced the performance of OLEDs. Current-Voltage, Luminance-Voltage characteristics were measured at room temperature.

• Journal of Ginseng Research
• /
• v.28 no.4
• /
• pp.183-190
• /
• 2004

On May of 2002, the 34 isolates of Rhizoctonia solani were isolated from the symptom of damping-off on basal stems of 2-year-old to 6-year-old Panax ginseng which were cultivated in the 17 fields in Kyunggi-do, Chun­gcheungnam-do and Jeollabuk-do province in Korea. All isolates were identified as anastomosis group 2-1. Pre-emer­gence damping-off occurred on underground part of stem of 2-year-old ginseng in the pot trial with artificial inoculation. However, in the 4-year-old ginseng field with artificial inoculation, post-emergence damping-off occurred. The severe incidence of damping-off was found in the 6-year-old ginseng field in Kimje-si, Jeollabuk-do province on June 5 of 2003, the rate of which showed $18.6{\%}$ of area in the field by spread of the disease since 2-year-old. The sclerotia of R. solani, started to be formed after 7 days incubation on potato dextrose agar at $25^{\circ}C,$ were grayish brown, spherical to irregular and about $500{\mu}m$ in diameter, which became dark brown after 14 days incubation. The temperature range for the myce­lial growth of R. solani isolates was $5\~30^{\circ}C,$ and the optimal temperature was $25^{\circ}C,$ their growth were very poor at $5\;or\;30^{\circ}C$. The isolates grew at the range of pH $4.5\~8.1$ tested and optimal pH for growth was pH 4.5$\~5.8%, whereas their growth were very poor above the pH 7.2.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1778-1780
• /
• 2004

Microwave heating system of KSTAR consists of ECH and LHCD. ECH and LHCD offer the reliability of operation in the beginning of plasma formation and non-inductive current drive for long time steady state operation with maintaining MHD stability, respectively. LHCD demands 5 GHz of frequency and consists of c-band waveguide, 4-port circuitor, dry dummy load, dual directional coupler, E-bend, arc detector. Our system is a lineup type pulse modulator that has 45 kV of output pulse voltage, 90 A of pulse current, 4 us of pulse width. 1:4 step-up pulse transformer, 7 stages of PFN and thyratron tube (E2V, CX1191D) are used in this modulator. The purpose of this paper is to show the modulator design and experimental result.

• Journal of Korea Foundry Society
• /
• v.27 no.2
• /
• pp.83-87
• /
• 2007

Aluminum plates of the same materials as the foam were attached by the casting process inserting the foam as a core to investigate the tensile property of open cell foams. Tensile properties of the open cell 6063 aluminum alloy foam of $10{\sim}30$ PPI were measured before and after heat treatment. Densities of test specimens were between 0.14 and $0.29g/cm^3$. Tensile strength of the 6063 aluminum foam after heat treatment showed little change. C values were in the range of $0.41{\sim}0.87$ for as cast foams and $0.11{\sim}0.27$ for T6 heat treated foams in the eq. of ${\sigma}^* _{pl}/{\sigma}_{ys}=C({\rho}/{\rho}_s)^{1.5}$, and increased with increase in the cell size.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.875-878
• /
• 1992

In this study, We made use of inter-electrode capacitively coupled type plasma polymerization apparatus in order to make the organic optical thin films. We adopted in Benzen. Vinyl-Pyridine and Styrene, which have optical function in the organic world and manufactured double later. It is examined optics properties by it respectively. At the middle wave length as 550[nm], the transmittance is double layer smaller than one of single layer. The refractive index with wave length is various from 1.55 to 1.65. Then, it is known that measured results are valid because the extinction coefficient(K) is about $10^{-4}$ for variation of refractive index.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.173-179
• /
• 2004

Combustion of refuse derived fuel(RDF) and refuse plastic fuel (RPF) was carried out in a lab-scale circulating fluidized bed. Experiment was investigated cold flow visualization. RDF was made by C & tech and RPF was made by KRS. The results include distribution of temperature in the combustion chamber, and concentrations of flue gas such as $O_2$, $CO_2$, CO, $NO_x$ and HCs Micro G.C(gas chromatograph) was employed to find out concentration of He Temperature distribution was different when RDF and RPF were burnt respectably. As air ratio became increased, $CO_2$, CO, and total of HCs emissions were decreased. According to the number of carbon atom of HCs, HC were classified as five kinds of HC.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1685-1686
• /
• 2000

Crack-free and homogeneous com ceramic and epitaxial lead zirconate titanat ferroelectric thin films with perovskite structure been prepared by sol-gel processing. Ti-isoprop and lead acetate trihydrate and zirconium-pro are used raw materials. EAcAc is used as a cat 2-Methoky ethanol is used as a solvent annealing temperatures of the thin films are 0$^{\circ}C$.