• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.495-501
• /
• 1988

Verneuil method uses oxyhydrogen flame for its heat source. This method was used to grow corundum monocrystals. Parametersof this method are feeding rate, gas pressure, lowering rate and growth axis. These parameters were examined. Crystals's qualities and shapes are affected by these parameters. Crystals having good qualities and shape were grown under the conditions that feeding rate, 0.2∼0.5g/min, lowering rate, 10∼20mm/hr ; gas pressure, 3∼4psi ; growth axis was shifted 60 degrees from c axis.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2332-2334
• /
• 1999

This paper presents the results of multi-stress chamber experiments done to examine the tracking and erosion performance of polymer insulator. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs including the nature of interfaces in insulation design. Therefore, multi-stress testing is believed to a suitable test for evaluating the aging performance of polymer insulator designs. We have investigated IEC 61109 Annex C for estimating long time performance of polymer insulator.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2259-2261
• /
• 2003

본 연구에서는 전원선로의 정전시나 입력 전원에 이상 상태가 발생했을 때 정상적인 전원을 컴퓨터에 공급하는 Power Supply 내장용 무정전 전원장치(Uninterruptible Power System : UPS)의 개발하였다. 본 연구에서 개발한 내장형 무정전 전원장치는 마이컴(PIC16C74A)을 이용하여 컴퓨터 Power Supply 내부에 장착하였으며, 사용자가 편리하도록 하기 위해서 내장형 무정전 전원장치의 그래픽 사용자 인터페이스를 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.251-253
• /
• 2001

This paper presents a fault location algorithm for distribution feeder systems. Distribution feeders include single phase and three phase laterals. The proposed algorithm achieves a high accuracy by continuously updating voltage and current phasor using the symmetrical components and admittance load model.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.319-321
• /
• 2001

When the fault occurred at distribution system, the restoration was late. There are 2 reasons The one is the error of fault location the other is multiple possible candidates of fault location. This paper presents two of new techniques for diagnosing fault regions. The proposed diagnosis scheme is capable of accurately identifying the location of fault upon its occurrence. based on the integration of information available from protective devices and measured load current change at the substation. In this paper expert system for real fault region is presented using these facts. Testing of the developed system using EMTP Simulation Model has demonstrated.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.275-277
• /
• 2001

This paper presents a fault location algorithm using current distribution factors for distribution feeder systems. When a fault occurs in distribution system, an accurate fault distance is important for fast fault restoration. The proposed algorithm achieves a high accuracy using negative sequence circuit with various fault conditions.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.121-123
• /
• 2001

This paper presents a fault location algorithm using iterative method at unbalance condition for distribution feeder systems. Distribution feeders include single phase and three phase laterals. The proposed algorithm achieves a high accuracy by continuously updating voltage and current phasor using the phase components and admittance load model.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.278-281
• /
• 2001

Identifying the fault location has to deal with multiple possible candidates. It presents a new technique to diagnosis a fault region. The proposed diagnosis scheme identifies accurately the location based on the protective device operations and load current change at the substation. An Expert system is presented using these facts.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.672-674
• /
• 2000

The paper presents design procedure and characteristics of Switched Reluctance Motor(SRM). SRM is capable of application to various field because of its constructional advantages. In design procedures, pole shoe will be considered. First step, overall design will be accomplished using PC-SRD. Then, inductance and torque characteristics is inspected with motor geometries by FEA.

• Natural Product Sciences
• /
• v.24 no.1
• /
• pp.71-78
• /
• 2018

The present study deals with the determination of optimal values of operating parameters such as the temperature of heating, the mass of the plant material and the volume of water leading to the best yield of electromagnetic induction (EMI) heating extraction of Algerian Thymus fontanesii essential oil. After an appropriate choice of the three critical variables, eight experiments leaded to a mathematical model as a first-degree polynomial presenting the response function (yield) in the relation to the operating parameters. From the retained model, we were able to calculate the average response, the different effects and their interactions. The maximum of essential oil recovery percentage relative to the initial mass of plant material was 1.69%, and was obtained at ($140^{\circ}C$, 250 g and 4.5 L). The chemical composition of the Algerian T. fontanesii essential oil under the obtained optimal conditions ($140^{\circ}C$, 250 g and 4.5 L), determined by GC/MS and GC/FID, reveled of the presence of major components such as: carvacrol ($70.6{\pm}0.1%$), followed by p-cymene ($8.2{\pm}0.2%$).