• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.386-391
• /
• 2019

This paper presents analysis results for the effect of the directional group delay of the antenna to implement a precision radio navigation system. The analysis was conducted through antenna simulation and test, and the test was performed in an anechoic chamber. The directional group delay of the antenna was calculated in phase-based analysis method. The results showed that a variation of up to 7.7ns in group delay occurred per antenna direction. The group delay variation from the analysis is 2.31 meters when converted into distance. It was tested using a real radio navigation system based on the time of arrival (TOA). The test verified the distance variation of 2.1 meters, and this value is similar to those obtained from the simulation and chamber test analysis.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.749-754
• /
• 2006

This study performed of a water cooling system by using a steam ejector and jet condenser to drop the temperature of the water in aquafarm by about $5^{\circ}C$ from $25^{\circ}C$ or higher in this research, to replace the present water cooling system, Ive focused on a water cooling system operated by latent heat of evaporation, thus this system needs a vacuum pressure to evaporate the water in enclosed tank. The water cooling effects are dependent on the vacuum pressure in the enclosed tank, and the cooling water is generated by evaporation. As the experimental results, the absolute vacuum pressure obtained was about $5{\sim}8mmHg$ using a steam driven ejector with jet condenser in experiments. The obtained results are respectively ${\Delta}T=7^{\circ}C$, ${\Delta}T=5^{\circ}C$ and ${\Delta}T=5.5^{\circ}C$ at heat exchanger flow rate 4L/M. The obtained results are respectively ${\Delta}T=5.5^{\circ}C$, ${\Delta}T=5.5^{\circ}C$ and ${\Delta}T=5.5^{\circ}C$ at heat exchanger flow rate 4.5L/M.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1007-1010
• /
• 2002

The accuracy of high speed feeding type laser cutting M/C is the major factor directly concerned with the accuracy of the processed work, and the feed errors of feed system make the machining errors of work directly on processing. In this point, this study focused on the generative elements in feed errors of laser cutting M/C when operating its laser head. In order to improve the accuracy of this machining center, feed errors are measured by a laser interferometer.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.22-27
• /
• 2005

The preparation of B4C by SHS in $B_{2}O_{3}-Mg-C$ system was investigated in this study. In the preparation of B4C, the effect on reactivity and reaction products of the initial pressure of inert gas in reactor, the content of Mg and C in mixture was investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 25 atm, and as the pressure increased, the concentration of unreacted Mg decreased and combustion temperature increased. At the initial inert gas pressure in reactor of 25 atm, the optimum composition for the preparation of pure B4C was $2B_{2}O_{3}+6.3Mg +0.94C$. The B4C synthesized in this condition had an irregular shape and the particle size of $1\~3{\mu}m$.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.1
• /
• pp.50-55
• /
• 2001

A new type of flywheel energy storage system that has a horizontal axle with High $T_c$, superconductor bearings using Y123 single-domained crystals was developed.The dynamic Properties, stiffness and damping of the high $T_c$, superconductor radial bearings were experimentally estimated using a imbalance excitation method. The imbalance excitation method applied to this rotor- bearing system identified the identified stiffness and damping of the high temperature superconductor beatings to be 2.8 $3.3 {\times} 10^5 N/m and 775 204$ Nsec/m respectively.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.417-419
• /
• 2004

Because of the demands for high performance and high integrated system, the needs for optimal platform becomes more importance. Optimal platform can handle more data effectively with same resources. AMBA(Advanced Microprocessor Bus Architecture)$^{TM}$ defines on-chip communication standard for designing high performance embedded micro-controllers. It is consisted of AHB, ASB and APB. It can support fast implementation and reliability in system that is composed with reusable IPs. DMAC is one of master in system and generate master signals of AHB to communicate data from one slave(peripheral or memory) to another slave. It can reduce burden of CPU and increase system performance. We designed DMAC based on AMBA and it supports 13 Channels. Each channel can be controlled by software program. It decides channel's priority using round-robin method. It can support P2P, P2M, M2P and P2P communication.

• East Asian mathematical journal
• /
• v.35 no.3
• /
• pp.341-349
• /
• 2019

In this paper, we are concerned with the minimal positive solution to system of the nonlinear matrix equations $A_1X^2+B_1Y +C_1=0$ and $A_2Y^2+B_2X+C_2=0$, where $A_i$ is a positive matrix or a nonnegative irreducible matrix, $C_i$ is a nonnegative matrix and $-B_i$ is a nonsingular M-matrix for i = 1, 2. We apply Newton's method to system and present a modified Newton's iteration which is validated to be efficient in the numerical experiments. We prove that the sequences generated by the modified Newton's iteration converge to the minimal positive solution to system of nonlinear matrix equations.

• The Journal of Korean society of community based occupational therapy
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2017

Objectives : This study was conducted to investigate the activity of the supra and infrahyoid muscles according to the temperature and the amount of water in healthy adults. Methods : The amount of water was set to 3 mL and 20 mL, and the temperature was subdivided into $4^{\circ}C$, $22^{\circ}C$, and $40^{\circ}C$ in order to compare the activity of the supra and infrahyoid muscles in twenty-seven healthy adults. We used the mean value of the activity of the supra and infrahyoid muscles while they were swallowing saliva in order to set the reference voluntary contraction (%RVC). Results : Muscle activity was significantly increased when they swallowed 20 mL of water rather than 3 mL in the left infrahyoid muscles at $4^{\circ}C$, $22^{\circ}C$ and $40^{\circ}C$ (p=.00; p=.00; p=.00), the right infrahyoid muscles at $22^{\circ}C$and $40^{\circ}C$ (p=.01; p=.01), the left suprahyoid muscles at $4^{\circ}C$ (p=.03). Muscle activity of the right suprahyoid muscles was significantly decreased at $40^{\circ}C$ compared to $4^{\circ}C$ and $22^{\circ}C$ when they swallowed 20 mL of water (p=.04). Conclusion : In the future, other variables such as viscosity and taste should be considered, and further studies on patients with impaired nervous system as well as healthy subjects will be needed.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.1-6
• /
• 2011

The performance and practicality of cryptosystem for encryption, decryption, and primality test is primarily determined by the implementation efficiency of the modular exponentiation of $a^b$(mod n). To compute $a^b$(mod n), the standard binary squaring still seems to be the best choice. But, the d-ary, (d=2,3,4,5,6) method is more efficient in large b bits. This paper suggests m-numeral system modular exponentiation. This method can be apply to$b{\equiv}0$(mod m), $2{\leq}m{\leq}16$. And, also suggests the another method that is exit the algorithm in the case of the result is 1 or a.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.189-195
• /
• 2004

A 10 Gb/s limiting amplifier IC with the emitter area of $1.5{\times}10{\mu}m^2$ for optical transmission system was designed and fabricated with a AIGaAs/GaAs HBTs technology. In this stud)', we evaluated fine pitch bump using WL-CSP (Wafer Level-Chip Scale Packaging) instead of conventional wire bonding for interconnection. For this we developed WL-CSP process and formed fine pitch solder bump with the $40{\mu}m$ diameter and $100{\mu}m$ pitch on bonding pad. To study the effect of WL-CSP, electrical performance was measured and analyzed in wafer and package module using WL-CSP. In a package module, clear and wide eye diagram openings were observed and the riselfall times were about 100ps, and the output" oltage swing was limited to $600mV_{p-p}$ with input voltage ranging from 50 to 500m V. The Small signal gains in wafer and package module were 15.56dB and 14.99dB respectively. It was found that the difference of small signal gain in wafer and package module was less then 0.57dB up to 10GHz and the characteristics of return loss was improved by 5dB in package module. This is due to the short interconnection length by WL-CSP. So, WL-CSP process can be used for millimeter wave GaAs MMIC with the fine pitch pad.