• 제목/요약/키워드: C.B.D

검색결과 8,713건 처리시간 0.051초

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

이조시대(李朝時代)의 임지제도(林地制度)에 관(關)한 연구(硏究) (A Study on the Forest Land System in the YI Dynasty)

  • 이만우
    • 한국산림과학회지
    • /
    • 제22권1호
    • /
    • pp.19-48
    • /
    • 1974
  • 토지국유원칙(土地國有原則)을 표방(標榜)하고 "공사(公私) 공리(共利)"를 기본원칙(基本原則)으로 하고 있었던 고려조(高麗朝)의 시전과제도(柴田科制度)도 집권력(執權力)의 약화(弱化)로 인(因)하여 조만간(早晩間), 붕괴(崩壞)되고 말았던 것이나 임지제도(林地制度)에 있어서는 분묘설정(墳墓設定)의 자유(自由)와 개간장려(開墾奬勵)를 이용(利用)한 삼림(森林)의 광점(廣占) 및 전시과제도(田柴科制度)로 인(因)한 시지(柴地)의 수조권위양(收租權委讓)으로 유래(由來)된 사적수조권(私的洙組權)이 결부(結付)된 삼림(森林)의 사점현상등(私占現象等)이 점차(漸次) 발전(發展)하여 고려중기(高麗中期)의 국정해지기이후(國政解地期以後)에는 대부분(大部分)의 삼림(森林)이 권력층(權力層)의 사점지(私占地)로 화(化)하여 왔었다. 고려조(高麗朝)의 모든 제도(制度)를 그대로 계승(繼承)한 이조(李朝)는 건국후(建國後) 국가소용(國家所用)의 삼림확보(森林確保)를 위(爲)한 삼림수용(森林收用)의 제도확립(制度確立)이 긴요(緊要)하였음으로 전국(全國)의 삼림(森林)을 국가권력(國家權力)에 의(依)하여 공수(公收)하고 국가(國家)와 궁실소용이외(宮室所用以外)의 모든 삼림(森林)은 사점(私占)을 금(禁)한다는 "시장사점금지(柴場私占禁止)"의 제도(制度)를 법제화(法制化)하였고 도성주변(都城周邊)의 사산(四山)을 금산(禁山)으로 함과 아울러 우량(優良)한 임상(林相)의 천연림(天然林)을 택(擇)하여 전조선용재(戰漕船用材)와 궁실용재(宮室用材)의 확보(確保)를 위(爲)한 외방금산(外方禁山)으로 정(定)하고 그 금양(禁養)을 위(爲)하여 산직(山直)을 배치(配置)하였다. 그리고 연병(練兵)과 국왕(國王)의 수렵(狩獵)을 위(爲)한 강무장(講武場)과 관용시장(官用柴場), 능원부속림(陵園附屬林)의 금벌(禁伐), 금화(禁火)를 제정(制定) 등(等) 필요(必要)에 따라 수시(隨時)로 삼림(森林)을 수용(收用)하였으나 고려조이래(高麗朝以來)로 권력층(權力層)에 의(依)하여 사점(私占)되어온 삼림(森林)을 왕권(王權)으로 모두 공수(公收)하지는 못하였던 것이다. 이조초기(李朝初期)에 있어서의 집권층(執權層)은 그 대부분(大部分)이 고려조(高麗朝)에서의 권력층(權力層)이었던것 임으로 그들은 이미 전조시대(前朝時代)로부터 많은 사점림(私占林)을 보유(保有)하고 있었던 것이고 따라서 그들이 권력(權力)을 장악(掌握)하고 있는 한(限) 사점림(私占林)을 공수(公收)한다는 것은 어려운 일이었으며 그들은 오히려 권력(權力)을 이용(利用)하여 사점림(私占林)을 확대(擴大)하고 있었던 것이다. 또 왕자(王子)들도 묘지(墓地)를 빙자(憑藉)하여 주(主)로 도성주변(都城周邊)의 삼림(森林)을 광점(廣占)하고 있던 터에 성종(成宗)의 대(代) 이후(以後)로는 왕자신(王自身)이 금령(禁令)을 어기면서 왕자(王子)에게 삼림(森林)을 사급(賜給)하였음으로 16세기말(世紀末)에는 원도지방(遠道地方)에 까지 왕자(王子)들의 삼림사점(森林私占)이 확대(擴大)되었고 이에 편승(便乘)한 권신(權臣)들의 삼림사점(森林私占)도 전국(全國)으로 파급(波及)하였다. 임진왜란후(壬辰倭亂後)에 시작(始作)된 왕자(王子)에 대(對)한 시장절급(柴場折給)은 삼림(森林)의 상속(相續)과 매매(賣買)를 합법화(合法化)시켰고 이로 인(因)하여 봉건제하(封建制下)에서의 사유림(私有林)을 발생(發生)시키게 된 것이다. 그리하여 권신(權臣)들도 합법적(合法的)으로 삼림(森林)을 사점(私占)하게 되었고 따라서 이조시대(李朝時代) 임지제도(林地制度)의 기본(基本)이었던 시장사점금지(柴場私占禁止)의 제도(制度)는 건국초(建國初)로부터 실행(實行)된 일이 없었으며 오로지 국가(國家)의 삼림수용(森林收用)을 합법화(合法化)시키는 의제(擬制)에 불과(不過)하였던 것이다. 금산(禁山)은 그 이용(利用)과 관리제도(管理制度)의 불비(不備)로 인(因)하여 산하주민(山下住民)들의 염오(厭惡)의 대상(對象)이 되었음으로 주민(住民)들의 고의적(故意的)인 금산(禁山)의 파괴(破壞)는 처음부터 심(甚)하였고 이로 인(因)하여 국가(國家)에서는 용재림확보(用材林確保)를 위(爲)한 금산(禁山)의 증설(增設)을 거듭하였으나 관리제도(管理制度)의 개선(改善)이 수반(隨伴)되지 않았음으로 금산(禁山)의 황폐(荒廢)는 더욱 증대(增大)되었다. 영조(英祖)는 정국(政局)을 안정(安定)시키기 위(爲)하여 경국대전이후(經國大典以後) 남발(濫發)된 교령(敎令)과 법령(法令)을 정비(整備)하여 속대전(續大典)을 편찬(編纂)하고 삼림법령(森林法令)을 정비(整備)하여 도성주변(都城周邊)의 금산(禁山)과 각도(各道) 금산(禁山)의 명칭대신(名稱代身) 서기(西紀) 1699년(年) 이후(以後) 개칭(改稱)하여온 봉산(封山)의 금양(禁養)을 강화(强化)시키는 한편 사양산(私養山)의 권한(權限)을 인정(認定)하는 등(等) 적극적(積極的)인 육림정책(育林政策)을 퍼려하였으나 계속적(繼續的)인 권력층(權力層)의 삼림사점광대(森林私占廣大)는 농민(農民)들로부터 삼림(森林)을 탈취(奪取)하였고 농민(農民)들 이 삼림(森林)을 상실(喪失)함으로써 국가(國家)의 육림장려등(育林奬勵策)은 효과(効果)를 나타내지 못하였던 것이다. 임진왜란후(壬辰倭亂後)의 국정해이(國定解弛)로 인(因)한 묘지광점(墓地廣占), 왕자(王子)에 대(對)한 삼림(森林)의 절급(折給) 권세층(權勢層)에 대(對)한 산림사점(森林私占)은 인허(認許)하는 입안문서(立案文書)의 발행등(發行等)으로 법전상(法典上)의 삼임사점금지조항(森林私占禁止條項)은 사문화(死文化)되었고 이조말기(李朝末期)에 있어서는 사양산(私養山)의 강탈(强奪)도 빈발(頻發)하고 있음을 볼수 있다. 이와 같이 이조시대(李朝時代)의 시장사점금지조항(柴場私占禁止條項)은 오로지 농민(農民)에게만 적용(適用)되는 규정(規定)에 불과(不過)하였고 이로 인(因)하여 농민(農民)들의 육림의욕(育林意慾)은 상실(喪失)되었으며 약탈적(掠奪的)인 삼림(森林)의 채취이용(採取利用)은은 금산(禁山), 봉산(封山) 및 사양산(私養山)을 막론(莫論)하고 황폐(荒廢)시키는 결과(結果)를 자아냈으며 권력층(權力層)의 삼림점탈(森林占奪)에 대항(對抗)한 송계(松契)의 활동(活動)으로 일부(一部) 공산(公山)이 농민(農民)의 입회지(入會地)로서 보존(保存)되어왔다. 그럼에도 불구(不拘)하고 일제(日帝)는 이조말기(李朝末期)의 삼림(森林) 거의 무주공산(無主公山)이 었던것처럼, 이미 사문화(死文化)된 삼림사점금지조항(森林私占禁止條項)을 활용(活用)함으로써, 국가림(國有林)으로 수탈(收奪)한후(後) 식민정책(植民政策)에 이용(利用)하였던 것이나, 실제(實際)에 있어서 이조시대(李朝時代)의 삼림(森林)은 금산(禁山), 봉산(封山), 능원부속림등(陸園附屬林等)의 관금지(官禁地)와 오지름(奧地林)을 제외(除外)하고는 대부분(大部分)의 임지(林地)가 권세층(權勢層)의 사유(私有) 내지(乃至)는 사점하(私占下)에 있었던 것이다.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

수종의 식물병원균(흰비단병균$\cdot$균핵병균 및 좀검은 균핵병균)이 생산하는 가수분해효소의 활성 (Activities of the Hydrolytic Enzymes Produced by Plant Pathogenic Fungi, Sclerotium rolfsii, Sclerotinia Sclerotinia and Sclerotiorum, and Helminthosporium sigmoideum var. irregulare)

  • 조백호;김기청
    • 한국응용곤충학회지
    • /
    • 제16권4호
    • /
    • pp.199-208
    • /
    • 1977
  • 수종의 식물병원균(흰비단병균, 균핵병균, 좀검은균 핵병균)이 생산하는 가수분해산소(Cellulase Cx, Invertase, $\beta-amylase$, Xylanase, PMG, PG, Phosphatase, Protease)를 균계체내의 효소 및 배양여액내의 효소와 균핵내의 효소(좀검은균핵병균은 제외)로 나누어 그의 생산량과 pH에 따른 활성의 변화를 검토한 결과를 요약하면 다음과 같다. 1. 배양 10일후의 Cx활성은 균핵병균이 다른 균에 비하여 활성이 높았고 흰비단병균과 균핵병균은 산성측(pH 3.0 부근)에서, 좀검은균핵병균은 중성측(pH6.0 부근)에서 활성이 높았다. 2. 흰비단병균의 Invertase는 다른균에 비하여 약 20배정도 높은 활성을 보였고 3균주 모드 배양여액과 균계체간에 효소활성의 차가 인정되지 않았다. 3. Xylanase의 활성은 3균주 모두 균계체, 균핵 및 배양여액에 따라 또 pH에 따라 아주 다양한 변화를 나타냈고 균핵내에서 활성이 높았다. 4. $\beta-amylase$의 활성은 공시균중 좀검은균핵병균의 균계체, 배양여액이 가장 높았다. (약 12.0ug/min) 흰비단병균과 균핵병균ㅇ서는 균계체나 균핵에서 보다 배양여액에서 높았는데 활성최적pH는 균계체, 균핵 모두 pH 6.2였으나 배양여액에서는 흰비단 병균과 균핵병균이 pH3.0이었는데 반해 좀검은균핵병균은 pH6.2였다. 5. PMG의 활성은 공시균 모두 배양여액에서 높았고 균계체에서는 균핵병균과 좀검은균핵병균이 높았으며 활성최적 pH는 균에 따라 또는 측정부분에 따라 다양하게 나타났다. 6. PG의 활성은 흰비단 병균과 균핵병균의 균계체에서 각각 9,1ug/min. 9.5ug/min으로서 가장 높았고 활성최적 pH는 흰비단병균이 pH4.5부근 균핵병균이 pH.3.0부근이었다. 7. 흰비단병균과 균핵병균의 Phosphatase는 산성측(최적 pH3.5)에서 활성이 높았고 좀검은 균핵 병균은 산성, 중성, 알카리측에서 각각 Peak가 나타났으나 최적 pH는 9.5였다. 8. 공시균주 모두 Protease는 pH 10.0에서 최고활성을 나타냈고 특히 좀검은균핵 병균의 배양여액내 효소활성이 높았다.

  • PDF

솔나방의 시맥(翅脈)과 인편(鱗片)에 관(關)한 연구(硏究) (I) (On the wing venation and scales of Dendrolimus spectabilis Butler (I))

  • 윤정구
    • 한국산림과학회지
    • /
    • 제2권1호
    • /
    • pp.59-65
    • /
    • 1962
  • 솔나방의 지역적(地域的)인 변이(變異)(변이(變異)가 있다면)를 구명(究明)하고자 우선 수원지방산(水原地方産)의 솔나방을 재료(材料)로서 자아(雌蛾) 30 웅아(雄蛾) 15의 45개체(個體)를 채집(採集)하여 시맥(翅脈)과 인편(鱗片)에 대(對)한 형태적(形態的)인 관찰(觀察)을 하여 보았다. 시맥(翅脈)은 개체(個體) 자아(雌蛾) 좌우(左右) 및 전후시별(前後翅別)로 10배(培)의 해부현미경(解剖顯微鏡)과 100배(培)의 현미경(顯微鏡)으로서 관찰(觀察)하였으며 인편(鱗片)의 형태(形態)와 크기 조사(調査)는 자웅아(雌雄蛾) 각(各) 15개체(個體)에 대(對)하여 날개의 전면(全面)에서 Sample을 취(取)하고 부위별(部位別) 분포(分布)와 색채차(色彩差)의 원인(原因)을 구명(究明)하는데는 자아(雌蛾) 30개체(個體)의 전시동위치(前翅同位置)에서 Sample을 취(取)하여 100배(培)의 현미경(顯微鏡)으로서 관찰(觀察)하고 인편(鱗片)의 크기는 Micrometer를 사용(使用)하여 측정(測定)하였다. 길이의 측정(測定)은 소병(小柄)의 하편(下篇)으로부터 열편(裂片)의 상단(上端)까지를 측정(測定)하였으며 폭(幅)에 있어서는 분기(分岐)된 부분(部分)을 측정(測定)하였다. 시맥(翅脈)과 인편(鱗片)에 대(對)한 고찰(考察)의 결과(結果)는 다음과 같다. (1) 시맥(翅脈)은 개체(個體) 자웅(雌雄) 및 좌우문(左右問)의 변이(變異)는 볼 수 없었으며 동일개체(同一個體)의 전후시(前後翅)에서만이 달랐다. 전시맥상(前翅脈相)은 13개(個)의 종맥(縱脈)과 5~6 맥간(脈間)에 단 1 개의 "V"형(形) 횡맥(橫脈)으로 구성(構成)되었으며 후시맥상(後翅脈相)은 9개(個)의 종맥(縱脈)과 단 1개의 "V"형(形) 횡맥(橫脈)으로 구성(構成)되었다. (2) 인편(鱗片)의 형(型)은 채태적(彩態的)으로 보아 4Group으로 구분(區分)되었다. I Group은 단형(短形)의 인편(鱗片)으로 하방부(下方部)가 원형(圓形)에 근사(近似)하고 소병(小柄)이 돌출(突出)하여 있으며 인편(鱗片)의 상방부(上方部)가 그 열편(裂片)으로부터 10열편(裂片)으로 되어 있는데 열편(裂片)의 첨두상(尖頭上)에 세모(細毛)가 부착한 것과 부착하지 않은 것이 있다. II Group은 I Group보다 장형(長形)의 인편(鱗片)으로 하방부(下方部)의 형(形)은 I Group과 같으나 크기의 변화(變化)는 더욱 심(甚)하며 그 열편(裂片)으로부터 10열편(裂片)으로 되어 있다. III Group은 대부분(大部分)이 장형(長形)의 인편(鱗片)으로 하방부(下方部)가 장삼각형(長三角形)(장설형(長楔形))에 근사(近似)한 예저(銳底)이며 그 열편(裂片)으로부터 10열편(裂片)으로 되어 있고 열편(裂片)의 첨두상(尖頭上)에 장세모(長細毛)가 부착하여 있는 것이 특징(特徵)이며 또한 세모(細毛)가 없고 열편자체(裂片自體)가 장형(長形)인 것이 있다. IV Group은 장태(長彩)의 인편(鱗片)으로 하방부(下方部)가 III Group와 같이 예저(銳底)이나 열편(裂片)이 두소(短小)하고 첨단(尖端)이 순(純)한 것이 특징(特徵)으로 되어 있으며 그 열편(裂片)으로부터 9 열편(裂片)으로 되어 있다. (3) 인편(鱗片)의 부위별(部位別) 분포(分布)는 I II Group은 외연(外緣)을 제외(除外)한 전면(全面)에 분포(分布)되어 있으며 III Group은 시저부근(翅底附近)에 대부분(大部分) 분포(分布)되었고 IV Grup은 외연(外緣)에만 분포(分布)를 보였다. 열편(裂片)을 중심(中心)으로하여 보면 Group와 부위(部位)를 막론하고 대개 4 5 열편(裂片)을 가진 인편(鱗片)의 분포(分布)가 많았다. (4) 인편(鱗片)길이의 변화(變化)는 I Group에 있어서는 열편(裂片)이 다수(多數) 일수록 점점 증대(增大)되나 II III IV Grop 에서는 반대(反對)로 점점 감소(減少)된다. 폭(幅)의 변화(變化)에 있어서는 Group을 막론하고 변화가 그리 심(甚)하지는 않으나 열편(裂片)이 다수(多數) 일수록 인편자체(鱗片自體)의 폭(幅)은 넓어진다. (5) 날개의 색채(色彩)는 인편자체(鱗片自體)의 색소(色素)에 의(依)한 색소(色素) 색(色)으로서 갈색인편(褐色鱗片)과 백색인편(白色鱗片)의 혼합량(混合量)에 따라 색채(色彩)를 나타내고 있다.

  • PDF

기능성 정보 전달 방법 및 소비자 태도에 따른 건강기능식품 광고 효과 분석 (Analysis of Health Functional Foods Advertisements Effects according to the Delivery Tool for Efficacy Information and Consumers' Attitudes)

  • 이연경;김지연;권오란;황인경
    • 한국식품영양학회지
    • /
    • 제29권6호
    • /
    • pp.835-848
    • /
    • 2016
  • 본 연구에서는 소비자 중심적인 건강기능식품 기능성 전달방법을 도출하기 위하여 이미지, 원료 및 기능성에 대한 설명, 기능성을 설명하는 도표, 특허 정보, 권위자의 설명 등 다양한 전달 방법들이 소비자의 광고 평가에 미치는 영향을 분석하였다. 또한 소비자들이 이미 가지고 있었던 건강기능식품에 대한 인식들이 광고 평가에 미치는 영향에 대하여 살펴 보았다. 이미 수행된 정성조사(Focus group interview)에서는 실제 사용되던 건강기능식품 광고 50여건을 소비자에게 제시하고, 기능성과 관련하여 소비자의 광고 인식에 미치는 방법들을 찾아내었다. 이렇게 찾은 방법들에 대하여 보다 넓은 범위에서 검증하기 위하여, 이를 바탕으로 6가지의 광고안들을 개발하여 정량 조사를 수행하였다. 6가지 광고안은 각각 정인지 이미지+원료에 대한 설명+기능성을 설명하는 도표, 정인지 이미지+원료에 대한 설명, 정인지 이미지, 오인지 이미지, 오인지 이미지+특허 정보, 오인지 이미지+권위자의 설명을 반영하여 제작되었다. 정량 조사의 대상은 서울 및 수도권 거주자 30~60대 총 300명이었으며, 대인면접법으로 한 사람당 4가지 광고안을 평가하도록 하여 광고안 당 200개의 평가 결과가 나올 수 있도록 하였다. 광고에 대한 평가는 광고 위계 효과 모형에서 제시되는 인지-감정-행동 세 가지 요소가 모두 반영될 수 있도록 '광고가 시선을 끄는가', '광고가 얼마나 이해하기 쉽다고 생각하는가', '제품 기능에 대한 정보가 충분한가', '광고의 메시지에 공감이 가는가', '광고를 통해 제품의 효능/효과를 얼마나 신뢰하는가', '광고를 본 후 구입하고 싶은 생각이 드는가'의 6가지 항목을 질문하였다. 또한 광고에 대한 평가와 함께 소비자들이 건강기능식품에 대하여 가지고 있는 태도를 '건강하기 위해서는 건강기능식품을 꼭 섭취해야 한다고 생각한다', '건강기능식품의 효능/효과에 대해 신뢰한다', '건강기능식품을 구입하기 전에 많은 정보를 수집한 후 구입한다', '평소 건강기능식품 광고들을 관심있게 본다', '건강기능식품 광고에서 전달하는 효능/효과에 대해 신뢰한다' 이렇게 5가지 문항을 통하여 조사하였다. 건강기능식품에 대한 소비자의 태도를 t-검정 및 일원분산분석을 이용하여 분석한 결과, 성별에 따른 차이로서 '광고관심도'에 대해서는 유의적인 차이를 보이지 않았으나, '섭취필수도', '효과신뢰도', '구입 전 정보수집도' 및 '광고내용신뢰도'에 대해서는 여성이 남성보다 유의하게 긍정적인 태도를 취하고 있는 것으로 나타났으며, 연령에 따른 분석 결과로서는 모든 항목에 대하여 40대와 50대 연령층이 30대와 비교하여 보다 긍정적인 태도를 취하고 있음을 알 수 있었다. 제시된 6가지 광고에 대하여 광고 효과를 분산분석한 결과, 단순히 이미지만을 제시한 광고안들에 비하여 원료와 기능성에 대한 정보가 함께 제시된 광고안들의 효과가 유의적으로 높게 평가되어 즉, 원료 및 기능성에 대한 설명, 그래프 형태의 시험 결과 제시, 특허, 권위자의 설명은 인지, 정서, 행동 모든 측면에서 광고 효과를 높일 수 있는 것으로 확인되었다. 하지만 소비자들은 오인지 이미지에 대하여 인지하지 못하여 이에 따른 광고 평가의 영향은 없는 것으로 나타났다. 다른 변수들과의 상호작용을 살펴보기 위하여 이원분산분석을 수행한 결과, 이러한 경향은 성별, 연령과 서로 상호작용을 가지지 않았으며, 성별과 연령에 상관없이 동일하게 나타났다. 하지만 건강기능식품에 대한 태도와 상호작용을 관찰한 결과에서는 '섭취필수도', '효과신뢰도', '구입 전 정보수집도', '광고내용신뢰도'가 '이해용이도', '주목도', '공감도', '구매욕구도' 등에 대하여 상호작용 효과를 가지고 영향을 주는 것으로 확인되었다. 예를 들어, '섭취필수도'가 높은 그룹에서는 기능성에 대한 그래프, 특허 정보, 전문가에 대하여 언급하는 것이 광고에 대한 '주목도'를 높이는데 유의하게 효과적이었으나, '섭취필수도'가 낮은 그룹에서는 광고안에 따른 '주목도' 차이가 없었다. 이러한 결과로부터 기능성 관련 정보를 자세하게 제공하는 것은 이미지만 제시하는 것과 같이 적은 양의 정보를 제공하는 것보다 소비자가 광고와 그 내용에 대하여 주목하고, 이해하기 쉽다고 느끼고, 정보가 충분하다고 느끼고, 공감하고, 신뢰하며, 구매하고 싶다고 느끼도록 하는 데 효과적일 수 있으나, 이러한 효과는 소비자가 건강기능식품에 대하여 기본적으로 가지고 있는 태도에 따라서 변화할 수 있다는 것을 알 수 있었다. 기능성 전달 방법에 따른 광고 효과의 차이는 분명히 있으나, 그 효과를 극대화하기 위해서는 광고를 접하는 소비자들을 세분화하여 각기 다른 방식으로 접근하는 노력이 필요하다.

엡스타인 기형의 20년 수술 치험 (20 Years Surgical Experiences for Ebstein's Anomaly)

  • 이삭;박한기;이창영;장병철;박영환
    • Journal of Chest Surgery
    • /
    • 제40권4호
    • /
    • pp.280-287
    • /
    • 2007
  • 배경: 엡스타인 기형 환자들에서 수술적 치료의 임상적 결과를 살펴보기 위해 후향적 조사를 실시하였다. 대상 및 방법: 1984년 2월부터 2006년 6월까지 엡스타인 기형으로 수술적 치료를 시행 받은 50명의 환자들을 대상으로 후향적 연구를 시행하였다. 환자들의 평균 연령은 26.9세였고, 남자가 19명이었다. 동반 심질환으로는 심방중격결손(33), 동맥관개존(2), 심실중격결손(1), 폐동맥협착(4) 등이 있었고 90% (45/50)의 환자에서 중증도 이상의 삼첨판막 폐쇄부전을 동반하였다. Carpentier type은 A형 6명, B형 26명, C형 14명, D형 4명이 속하였고 10명의 환자에서 WPW증후군을 동반하였다. 수술방법으로는 31명의 환자에서 보존적 수술(삼첨판 성형술, 심방화 우심실 주름잡기술(plication of atrialized RV) 등)이 가능하였으며, 폰탄씨 수술은 4명, 삼첨판막 치환술 12명, 고식적 수술은 2명의 환자에서 시행되었다. 13명의 환자에서 양방향성 상대정맥-폐동맥 단락술을 시행하였고(one and a half ventricular repair), WPW 증후군을 동반한 10명의 환자와 심방세동의 4명의 환자에서 부정맥에 대한 수술적 치료가 함께 시행되었다. 걸과: 술 후 뉴욕심장학회 기능분류(New York Heart Association Functional Class) (중간값 3 (범위: $1{\sim}4$)${\rightarrow}\;(1{\sim}3)$)와 평균 심흉비$(0.65{\rightarrow}0.59)$는 술 전에 비해 통계학적으로 의미 있게 감소하였다(P<0.001, p=0.014). 평균 산소포화도$(86.6{\rightarrow}94.1%)$와 삼첨판막역류 정도(중간값 4 (범위: $1{\sim}4$)${\rightarrow}1\;(0{\sim}4)$) 역시 술 전에 비해 술 후 통계학적으로 의미 있게 향상되었다 (p=0.004, p<0.001). 양방향성 상대정맥-폐동맥 단락술과 보존적 수술간의 비교에서는 수술 전 우심실 압력(33.0 vs 41.3 mmHg), 중환자실 기간(2.86 vs 1.89일), 입원기간(10.6 vs 16.8일), 그리고 수술 후 좌심실 구축률(64.3 vs 72.8%)이 통계적으로 의미 있는 차이를 보였다. 술 후 조기사망이 3명(6%)의 환자에서 있었는데 2명은 양심실 부전, 나머지 1명은 패혈증으로 사망하였다. 평균 추적관찰 기간은 101.5개월이었으며 추적 조사 결과, 심장관련사망이 1명(폰탄 실패)이 있었고 6명의 환자에서 재수술을 요하였다(조직판막 퇴행성 변화(2), 폰탄 전환술(4)). 수술 후 10년 생존율은 90.2%였고, 10년 재수술 자유도는 78.9%, 심장관련 합병증의 자유도는 49.2%이었다. 걸론: 엡스타인 기형의 수술적 치료는 비교적 안전하게 시행될 수 있으며 양방향성 상대정맥-폐동맥 단락술의 추가가 고위험군에서는 도움이 되는 것으로 생각한다. 적절한 술기의 적응이 결국 장기 생존율의 호전과 재수술의 감소를 기대할 수 있을 것으로 생각한다.

우리나라 옷에 대한 현대인(現代人)의 의식(意識)과 춘용실태(春用實態)에 관(關)한 연구(硏究) - 서울 지역(地域)을 중심(中心)으로 - (A Study on Modern People's Consciousness and Wearing Practice of Korean Costumes)

  • 황춘섭
    • 복식
    • /
    • 제1권
    • /
    • pp.119-129
    • /
    • 1977
  • It is significant for developing the future for us to know our present age. In order to preserve our Korean costume as a fola clothes retaining our distinguished independent characterisitics and to help design the tomorrow of our Korean costume playing a role as a racial to develop the world clothing culture, a survey was conducted to investigate modern people's conscious-ness and wearing practumes of Korean costume by questionaire and interviewing methods. The results of the survey were analyzed as follows: (1) At present, Korean costumes were purchased as customtailored(64.0%) and as ready-made(17.8%) and most of them were not made at individual homes. The laundry and ironing of them were carried out at laundry shops(68.8%). Considering our present economic, social and cultural aspects, sowing, laundryand ironing will not be carried out at homes again in the future and ready made costumes seen to be produced in a large scale in the future. Garment makers and laundry shop operators should be trained how to make our Korean costumes retain our traditional beauty in the course of their production and laundry and the makers of ready-made costumes must make research how to efficiently produce ideal ready-made costumes by adopting the synchro system in their wrk odisivion. (2) The age group wearing Korean costumes most frequently was the aged people over 60 (their wearing rate; 45%-50%) and the group wearing them most frequently next io the aged people over 60, was housewives(their wearing rate; 15%-20%). Excludign aged people and housewives, other respondentsdid not wear Korean costumes very frequently. Men's wearing rate was lower their wearing rate was the younger their ages were and the less their monthly incomes were. Korean costumes were used for holiday and festival(60%), wedding and funeral ceremonies (52%), visiting and working(22%), casual wear(12.8%) and home wear(9.2%). The use of Korean costumes as casual and home wears, was lower than the use for holday, festival, visiting and working, Under our present circumstances in which our Korean people use both Western style clothes and Korean costumer, our Korean costume has lostits position as a basic and necessary requiement in Korean people's daily life and become a ceremonical and fancy costume. It is natural that the times and life change everything in our daily life. Our costume has to be made as good ceremonial and fancy clothes satisfying modern sensibility according to its new role. In order for us to get close with our clothes, a keen study must be carried out to cleat the color, material, style, function and harmony of the Korean costume matching the of the times. (3) The 47.8% of the respondents answered that they were proud of our Korean costume as our folk clothes, 47.6% replied that thought them just common and 1.1% responded that they were ashamed of it. Most of them were affirmative in feeling pride with our Korean costume. (4) Considering the functional aspect of Korean costumes, their strong points were symetric beauty, rhythmical beauty, unity feeling, harmonical beauty and detailed decorations. Their common shortcomings were lack of individuality and inadequateness for active life. The shortcomings of woman costumes were suppressing breast, making resperation difficult and in adequnteness in summer time. The main reason not to wear our Korean costumes, was due to the fact that they are incomvenient for active life. As a measure to eliminate such shortcomings, 1) the suspension system of skirt to remove the suppression of breast should be generally adopted. 2) they should be simplified in their structure to make them convenient for active life and adepuate in wearing them in hot weather in an extent to which the traditional beauty of the costume may not be lostand 3) a new technique must be explored for showing individuality by wearing method and new arrangment of colors and decorations. (5) The reasons desiring to wear Korean costumes were classifide as follows: A. Korean costumes are our traditional clothes(43.4%). B. Korean costumes are noble and beautiful(26.8%). C. They are accustomed to wear Korean costumes by habit(19.5%). D. Korean costumes are necessary for attending ceremoneis(9.5%). E. Miscellaneous reasons(0.8%). Classifying these reasons into age groups, the high age group over 40 wore them because they were easy to wear by habit and the low age group of 10-30 never thought that they were east to wear by habit. Considering that even those who were accustomed to wear Korean costumes showed a low wearing rate and that the young generation were accustomed to wear Western style clothes rather than Korean costumes, the wearing rate of Korean costumes will be reduced in the future if such trend continues. It is urgent for us to make our best efforts in order to enhance the interest of young generation in Korean costumes and not to make them lose the strong points of Korean costume in the future. (6) Conicering the plan of the respondents on what kind of clothes they were going to wear in the future, among the age group over 50, those who wanted to wear only Korean costumes were 24.8%(men) and 35.1%(women), those who wanted to wear 49.7%(men) and 47.4(women), those who wanted to wear chiefly Western style clothes were 20.7% (men) and 14.4%(women) and those who wanted to wear only Western style clothes, were 2.4% (men) and 2.1%(women). This shows that the general tendency to wear only or chiefly Korean costumes is more prevalent than that to wear only Western style. Among the age group under 50, the tendency to wear Western style clothes was conspicuous and most of the respondent answered that they would wear chiefly Western style clothes and Korean costumes occasionally. Only 5.4% of the respondent answered that they would wear only Western style clothes and this shows that meny respondents still wonted to wear Korean costumes. Those who wanted their descendants to wear what they desire, were 50.1%(men) and 68.8% (women) and those who wanted their descendants to wear Koran costumes occasionally, were 85.8%(men) and 86.3%(women). This shows that most of respondents wanted their descendants to wear Korean costumes. In order to realize, it is necessory for us to make ourdescendants recognize the preciousness of our traditional culture and modify our Korean costumes according to their taste so that they may like wearing them.

  • PDF

전북지역 산업체급식소 조리종사자의 고용형태에 따른 안전사고 실태 및 안전사고 예방관리에 대한 중요도와 수행도 분석 (Comparative analysis of status of safety accidents and importance-performance analysis (IPA) about precautions of safety accidents by employment type of industry foodservices in Jeonbuk area)

  • 소희;노정옥
    • Journal of Nutrition and Health
    • /
    • 제50권4호
    • /
    • pp.402-414
    • /
    • 2017
  • 본 연구는 전북지역 산업체급식소의 정규직과 비정규직 조리종사자 282명을 대상으로 급식소에서의 안전사고, 안전교육 실태 및 안전사고 예방관리의 중요도 및 수행도를 조사하여 산업체급식소의 안전사고 예방을 위한 효율적인 관리방안을 제시하고자 하였으며, 그 결과를 요약하면 다음과 같다. 조사대상자는 정규직 42.2% (119명), 비정규직 57.8% (163명) 이며 96.5%는 여자이었다. 고용형태에 따라서는 연봉수준 (p < 0.001), 직급 (p < 0.001), 평균 연령 (p < 0.001), 급식횟수 (p < 0.001)에서 유의적인 차이를 보였다. 정규직의 66.4%, 비정규직의 53.4%가 안전사고의 경험이 있으며 (p < 0.05), 사고원인은 본인의 부주의 (53.5%)가 가장 큰 원인이었다. 사고처리는 정규직은 회사부담 (71.6%)이 높으며 비정규직은 산재처리 (44.6%)가 높았다. 안전사고는 정규직은 화상 (48.6%), 절단사고 (31.1%)가 높았으며 비정규직은 미끄러짐 (47.8%)과 화상 (44.6%)의 순으로 차이가 있었다. 사고부위는 주로 손과 팔 (63.3%) 이었다. 정규직의 98.3%, 비정규직의 95.1%가 안전사고 예방을 위한 안전교육을 받았으며, 교육은 주로 영양사 (93.4%)가 실시하나 정규직은 산업안전관리공단 (6.8%)과 협회(2.6%)의 교육도 받고 있었다. 교육 빈도는 정규직의 68.4%가 1회, 23.9%가 2회, 7.7%는 3회 이상의 교육을 받았으나 비정규직은 1회 50.3%, 2회 37.4%, 3회 이상 12,2%로 비정규직의 교육 빈도가 유의하게 높았다 (p < 0.05). 교육방법은 주로 강의 (77.2%)로 진행되며, 교육 후 정규직의 37.6%는 별도의 평가가 없으나, 비정규직의 33.5%는 시험, 25.2%는 면담, 12.3%는 실기평가를 실시하고 있었다 (p < 0.05). 교육만족도는 조사대상자의 81.6%가 만족하며 비정규직 (85.2%)이 정규직 (76.9%)보다 더 만족하는 경향을 보였다. 교육 후 정규직의 73.5%, 비정규직의 71.6%만이 실제 작업에 교육내용을 적용하고 있었다. 적용하지 못하는 이유는 업무과중으로 인한 시간부족과 습관적인 작업행태 때문이었다. 산업체급식소의 정규직과 비정규직 조리종사원의 안전사고 예방관리에 대한 정규직과 비정규직의 중요도는 각각 4.26점, 4.15점이며 수행도는 정규직 3.96점, 비정규직 3.94점이었다. 독립표본 t-test로 분석한 결과, 21개의 항목 중 '튀김요리 시 물이 튀지 않게 하며 화상에 주의한다'에서 정규직 (4.43점)이 비정규직 (4.24점)보다 중요도가 유의적으로 높았으나 (p < 0.05), 수행도는 모든 항목에서 정규직과 비정규직간 유의적인 차이는 없었다. 대응표본 t-test 분석결과, 정규직의 중요도와 수행도간의 유의적인 차이를 보였다 (p < 0.001). 전체 21개 항목의 중요도와 수행도간에 유의적인 차이를 보였다. IPA분석결과, 중요도와 수행도가 높은 A영역 (Doing great)에서 '작업장 바닥의 물, 기름을 청소', '작업장과 통로의 물건 정리', '작업 시 미끄럼방지 안전화 착용', '사용하지 않는 호스는 감아서 정리', '화재위험 있는 전열기 코드 뽑기', '튀김요리 시 화상에 주의하며 조리'는 정규직과 비정규직 모두 해당되었으며, 이외 '물기 있는 손으로 전기시설 관리하지 않기'는 정규직에만 해당되었으며 '야채절단기 사용 시전용방망이 사용', '안전하게 칼 관리'는 비정규직에만 포함되었다. 중요도가 높으나 수행도가 낮은 B영역 (Focus here)에서 '출근 후 환기와 가스누출 확인', '콘센트 안전관리'는 정규직과 비정규직 모두 해당되었으며 이외에 '영양사에게 건강상태 보고' 및 '중량물 취급 시 올바른 자세로 작업'은 정규직에만 '가스차단기 작동확인'은 비정규직에만 포함되었다. 중요도는 낮으나 수행도가 높은 C영역(Overdone)에서 '기계설비 잠금장치 확인'은 정규직과 비정규직 모두에 해당되었으며 이외에 '야채절단기 사용 시 전용방망이 사용', '안전하게 칼 관리'는 정규직에 포함되었으며 '물기 있는 손으로 전기시설 관리하지 않기', '전기기구 연결 확인', '영양사에게 건강상태 보고' 및 '중량물 취급 시 올바른 자세로 작업'은 비정규직에 포함되었다. 중요도와 수행도가 낮은 D영역 (Low priority)에 'MSDS관리', '화학물질 위험표시 인지', '화학물질 취급 전 보호 장갑 등의 장비 착용', '작업 전 스트레칭 실시' 및 '보조도구를 이용하여 안전하게 작업대 높이 조정'이 정규직과 비정규직에 포함되었으며 이외에 정규직에 '전기기구 연결 확인', '가스차단기 작동확인'이 추가되었다. 본 연구결과를 종합하면, 전북지역 산업체급식소에서의 안전교육 실시는 잘 진행되고 있으나 아직도 교육을 받지 못하는 비정규직이 있으므로 이에 대한 경영주 및 영양사의 인식전환이 필요하겠다. 또한 조리종사원들의 안전사고 예방관리에 대한 중요도 인식은 고용형태 간 유의적인 차이 없이 높은 수준이었으나 교육 후 업무과중의 이유로 실제 적용하는 어려움이 있는 점을 볼 때 효율적인 업무관리 및 안전사고 예방을 위한 철저한 감독이 요구된다. 특히, 화학물질에 대한 이해 및 MSDS관리에 대한 조리종사원들의 낮은 중요도 인식과 수행도는 향후 안전교육에서 중요하게 다루어야 하겠다. 향후 정규직과 비정규직 구분에 따른 지원의 차이를 줄이고 소속감을 높여 조리종사원의 책임감과 안전의식을 높여 보다 안전한 급식소환경이 될 수 있는 방안이 요구된다.

한우 인공수정시 rbST 투여가 수태 및 분만율에 미치는 영향 (Effect of rbST Administrations at Artificial Insemination on Conception and Parturition Rates in Hanwoo)

  • 한만희;최선호;최연호;김현종;조상래;최창용;류일선;손동수;연성흠;우제석;권응기;윤기영;장병선
    • 한국수정란이식학회지
    • /
    • 제20권2호
    • /
    • pp.177-184
    • /
    • 2005
  • 본 연구는 정상 및 저수태 한우에 rbST를 투여하였을 때 수태 및 분만율에 미치는 영향을 조사하기 위하여 수행하였다. 시험축은 성빈 한우 383두와 임상적으로는 정상이나 3회 이상 수정시켜도 수태가 되지 않는 저수태 한우 79두, 총 462두를 시험에 공시하였다. 실험을 수행하기 위한 시험구 배치는 5개의 처리구, 즉 T1(무처리, 2ml의 생리 식염수), T2(rbST 250mg 수정시 1회 미근부에 투여), T3(rbST 250mg: 수정시 및 수정후 $10\~14$일째 2회 투여), T4(rbST 500 mg: 수정시 1회 투여) 및 T5(rbST 500mg: 수정시 및 수정후 $10\~14$일째 2회 투여)로 나누어 시험을 실시하였다. 그리고 호르몬과 병행 처리구는 Day 0일에 GnRH 100 ug/cow를 견갑부에 피하주사하고 Day 7일째 $PGF_2{\alpha}\;25mg/cow$를 주사하여 황체를 퇴행시키고, Day 9일째 GnRH 100ug/cow를 주사하여 배란 동기화를 유도하여 시험에 공시하였다. 1. 정상 한우에 인공수정시 rbST를 T1, T2, T3, T4 및 T5로 처리하였을 때, 1회 수정 수태율은 대조구$(52.4\pm9.72\%)$에 비하여 $T2(67.5\pm18.48\%)$에서 높은 것으로 나타났고, 저수태우에서는 대조구$(39.3\pm12.89\%)$보다 $T4(63.3\pm5.77\%)$에서 유의적으로 높은 수태율을 나타냈다.(p<0.05). 또한, 정상 한우의 분만율에 있어서는 처리구간 유의적인 차이가 인정되지 않았지만, 저수태우에서는 $T4(46.7\pm11.55\%)$에서 유의적으로 높은 성적을 나타냈다(p<0.05). 2. Ovsynch 방법으로 발정을 유기하여 인공수정시 rbST를 T1, T2, T3, T4 및 T5로 처리하였을 때, 1회 수정 수태율은 대조구에 비하여 T2에서 $12.5\%$가 높은 것으로 나타났고, 저수태우에서는 $T4(80.0\%)$에서 유의적으로 높은 수태 율을 나타냈다(p<0.05). 3. 정상 한우에 인공수정시 rbST를 T1, T2, T3, T4 및 T5로 각기 처리하였을 때, 임신 기간은 평균 $282.7\~284.8$일이었고, 또한 생시체중의 비교는 평균 $25.1\~25.9kg$으로서 처리 구간 유사한 결과를 보였다. 그러나, 송아지의 암수 성비는 T4 처리구(18두 vs. 9두)를 제외한 모든 처리구에서 유사한 경향을 보였다. 그리고, 저수태 한우의 평균 임신 기간은 $280.4\~289.3$일로서 정상우와 비교했을 때 비슷한 결과를 보였고, 또한 생시 체중의 조사 결과에서도 평균 체중이 $23.0\~26.6kg$으로서 각 처리구간에도 유의성은 없었다. 송아지의 암$\cdot$수의 성비는 T4 처리구(2두 vs. 8두)를 제외한 모든 처리구에서 유사하게 나타났다. 결론적으로, 본 연구에서는 정상 및 저수태 성빈 한우에 rbST를 투여한 후 수태율과 분만율을 조사한 결과 인공수정시 정상우에서는 rbST를 250mg 1회 투여, 그리고 저수태 한우에 있어서는 rbST를 500mg을 인공수정시 1회 투여하였을 때가 다른 처리구에서 보다 우수한 결과를 나타내었다. 따라서 인공수정시 일정량의 rbST투여는 한우의 수태 및 분만율을 향상시키는 것으로 사료된다.