• The Korean Journal of Food And Nutrition
• /
• v.11 no.5
• /
• pp.482-487
• /
• 1998

This study was carried out to investigate the effects of freezing temperature on quality of thawed beef loin. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -2$0^{\circ}C$ were higest by 3.4% to 30 days and by 1.8% to 60 days, respectively. And the thaw drip loss of -3$^{\circ}C$ freezing was more than -2$0^{\circ}C$ freezing. The cooking loss of water bath and pan boiling were increased significantly during freezing than the beginning of freezing, but were not different -3$^{\circ}C$ and -2$0^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -2$0^{\circ}C$ freezing was higher than -3$^{\circ}C$ freezing. The water soluble protein extractability of -3$^{\circ}C$ freezing was not significant different during freezing storage, that freezed at -2$0^{\circ}C$ was increased during freezing. The "L" value of the beginning of freezing was higher than during freezing, the "a" value was not different during freezing, and the "b" value during freezing was higher than the beginning of freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ and -2$0^{\circ}C$ freezing were highest by 94.4% to 45 days and by 94.0% to 15 days, respectively. The shear force value during freezing was higher than the beginning of freezing, the myofibrillar fragmentation index was not significant different during freezing. The pH was increased to freezing 30 days, after that was decreased.ays, after that was decreased.

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.233-239
• /
• 1992

The characteristics of Packsulgi were investigated with different cooking methods of conventional and pressure cookers and variation in panicle size of rice flour. The water contents of rice f1ours and Packsulgis were greater as the particle became coarser. The water contents of Packsulgis cooked with pressure cooker (P) were greater than those of conventional cooker (C). Degree of gelatinization in P was higher than that of C. There were no significant differences among the samples of P, whereas coarser f1ours tended to show higher degree of gelatinization than finer ones in C. The results of textural properties measured by rheometer showed that hardness, cohesiveness and gumminess of P was higher than that of C. The textural parameter of P increased as the particle became finer, whereas mat of C increased as the particle became coarser. L value of C was higher than that of P in me same particle size, whereas a and b value of P was higher than that of C. L and a value of both P and C increased as the particle became finer. b value in P increased as the particle became coarser, whereas mat in C increased as the particle became finer. According to me sensory evaluation, the appearance of C was more acceptable man that of P, whereas the texture of P was more acceptable than mat of C. There were no significant differences in overall quality among P and c and Packsulgis made by 60, 100 mesh rice f1our had higher acceptability than others.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.371-375
• /
• 1999

This study was conducted to investigate the effect of precooling on the qualify of Tsugaru apple. Tsugaru apple, filled in plastic container and carton, was precooled by pressure cooler and stored at 1$^{\circ}C$and 25$^{\circ}C$. At 25$^{\circ}C$, Hunter a-value was not shown the difference significantly and Hunter b-value was increased more than a-value during l month. However, Hunter a and b-value was not increased so much at 1$^{\circ}C$. Hardness and toatal acidity was decreased during storage and precooled apple was less decreased than non precooled. Free sugars in Tsugaru apple was consisted of 7.07% fructose, 2.85% glucose, and 2.53% sucrose. Free sugars were decreased during storage at 25$^{\circ}C$ and 1$^{\circ}C$, also, the precooling inhibited those decomposition.

• Korean journal of food and cookery science
• /
• v.9 no.4
• /
• pp.323-328
• /
• 1993

Benzo(a)pyrene [B(a)P], one of the polycyclic aromatic hydrocarbons (PAHs) is known as a potent carcinogen. As lipid consumption increases recently, the toxic effect of overheated lipid foods and fats ＆ oils were reported increasingly. In this study, the contents of B(a)p, other PAHs and rancidities of soybean oil were determined, and then the proper heating temperature, time and frequency were recommended, The work was carried out using soybean oil heated at $180\pm$5^{\circ}C$$, $200\pm$5^{\circ}C$$, and $300\pm$5^{\circ}C$$,for 50 hours. Acid Value(AV) and Conjugated Diene Value of samples were determined. The contents of B(a)P and other PAHs contents of all samples were masured by HPLC/UV method. The results obtained were as follows; Each content of PAHs in the fresh soybean oil was: Pyr 1.093, B(a)A 0.986, Ch 1.147, DMBA 1.082, B(e)P 0.664, Per 1.135, B(a)P 0.146, DBA 1.053, 3-MC 0.05 rg/kg. When the soybean oil was heated at $180\pm$5^{\circ}C$$, for 10, 20, 30, and 50 hours, B(a)P conterlts in heated soybean oils were 0.391, 0.692, 0.451, and 0.372 $\mu\textrm{g}$/kg respectively. Acid value of them were 0.26, 0.26, 0.29, and 0.33, and conjugated diene value was 0.67, 0.76, 0.99, and 1.04, respectively. When the soybean oil was heated at $200\pm$5^{\circ}C$$,and $300\pm$5^{\circ}C$$,for 10, 20, 30, and 50 hours, B(a)P coiltents in soybean oil heated at $200\pm$5^{\circ}C$$,were 0.844, 0.512, 0.479 and 0.247 Ig/kg respectively, Acid value 0.22, 0.21, 0.23 and 0.51 and CDNV 0.39, 0.49, 3.27, and 3.89. B(a)P contents in soybean oil heated at $300\pm$5^{\circ}C$$,were 0.466, 0.706, 0.607 and 0.247$\mu\textrm{g}$/kg respectively, Acid value 0.47, 1.57, 3.90, and 6.42 and CDNV 0.65, 2.15, 3.00, and 3.88.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.41-52
• /
• 2020

Purpose: To find out the dosimetric usefulness, setup reproducibility and efficiency of applying 3D Bolus by comparing two treatment plans in which Commercial Bolus and 3D Bolus produced by 3D Printing Technology were applied to the neck during VMAT treatment of Hypopahrynx Cancer to evaluate the clinical applicability. Materials and Methods: Based on the CT image of the RANDO phantom to which CB was applied, 3D Bolus were fabricated in the same form. 3D Bolus was printed with a polyurethane acrylate resin with a density of 1.2g/㎤ through the SLA technique using OMG SLA 660 Printer and MaterializeMagics software. Based on two CT images using CB and 3D Bolus, a treatment plan was established assuming VMAT treatment of Hypopharynx Cancer. CBCT images were obtained for each of the two established treatment plans 18 times, and the treatment efficiency was evaluated by measuring the setup time each time. Based on the obtained CBCT image, the adaptive plan was performed through Pinnacle, a computerized treatment planning system, to evaluate target, normal organ dose evaluation, and changes in bolus volume. Results: The setup time for each treatment plan was reduced by an average of 28 sec in the 3D Bolus treatment plan compared to the CB treatment plan. The Bolus Volume change during the pretreatment period was 86.1±2.70㎤ in 83.9㎤ of CB Initial Plan and 99.8±0.46㎤ in 92.2㎤ of 3D Bolus Initial Plan. The change in CTV Min Value was 167.4±19.38cGy in CB Initial Plan 191.6cGy and 149.5±18.27cGy in 3D Bolus Initial Plan 167.3cGy. The change in CTV Mean Value was 228.3±0.38cGy in CB Initial Plan 227.1cGy and 227.7±0.30cGy in 3D Bolus Initial Plan 225.9cGy. The change in PTV Min Value was 74.9±19.47cGy in CB Initial Plan 128.5cGy and 83.2±12.92cGy in 3D Bolus Initial Plan 139.9cGy. The change in PTV Mean Value was 226.2±0.83cGy in CB Initial Plan 225.4cGy and 225.8±0.33cGy in 3D Bolus Initial Plan 224.1cGy. The maximum value for the normal organ spinal cord was the same as 135.6cGy on average each time. Conclusion: From the experimental results of this paper, it was found that the application of 3D Bolus to the irregular body surface is more dosimetrically useful than the application of Commercial Bolus, and the setup reproducibility and efficiency are excellent. If further case studies along with research on the diversity of 3D printing materials are conducted in the future, the application of 3D Bolus in the field of radiation therapy is expected to proceed more actively.

• Journal of Biosystems Engineering
• /
• v.38 no.3
• /
• pp.180-184
• /
• 2013

Purpose: This study explored the factors influencing heating value in the process of torrefaction of water hyacinth. Methods: Torrefaction was applied with three temperature settings (200, 300, $400^{\circ}C$) and three time settings (1, 2, 3 h) using small electric heaters (11.3L of holding volume). This study investigated the heating values with the washing process and process factors influenced the torrefaction. In addition, this study compared the heating values in washed and unwashed samples and suggested the optimal conditions for increasing heating value. Results: Torrefaction increased the heating value by 8.18 ~ 30.04%. Comparing heating values of each condition, the optimal temperature for torrefaction was $300^{\circ}C$ and holding time was 1 hour. The washing process increased the heating value by 19 ~ 27%. The heating value of the sample treated at $300^{\circ}C$ for three hours was 4310.80 kcal/kg, which was greater than the first class wood pellet of 4300 kcal/kg. Conclusions: This study proved that the torrefaction and washing process increased the heating value of water hyacinth. Therefore, water hyacinth is expected to be an eco-friendly biomass which substitutes for wood pellet.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.

• Korean journal of food and cookery science
• /
• v.12 no.1
• /
• pp.6-12
• /
• 1996

The survival and growth of Vibrio parahaemolyticus in tryptic soy broth(TSB), flounder homogenate and oyster homogenate with 0 or 5% of ethanol was tested at -20, 5, 35, 45 and 50$^{\circ}C$. Growth pattern of V. parahaemolyticus was similar in TSB and flounder homogenate but slightly poor in oyster homogenate at 35$^{\circ}C$. Growth occured at 5% ethanol, in TSB and flounder homogenate after a prolonged lag period but decreased in oyster homogenate during incubation at 35$^{\circ}C$. TSB and fish homogenates containing 0 or 5% of ethanol were inoculated with 10$\^$6/-10$\^$7/ cells/ml of V. parahaemolyticus and cold or heat resistance of the cells were determined at -20, 5, 45 and 50$^{\circ}C$. At 5$^{\circ}C$, the viability in culture broth with 5% of ethanol or without ethanol was not vary with the culture broth. In the presence of 5% of ethanol at -20$^{\circ}C$, cells of V. parahaemolyticus in flounder homogenate and oyster homogenate were more significantly inhibited than in TSB. The D-valves for V. parahaemolyticu at 45 and 50$^{\circ}C$ was significantly lower in oyster homogenate than in TSB and flounder homogenate with 5% of ethanol or without ethanol. The D-values in each culture broth without ethanol were 1.9-3.5 times of that value in each culture broth containing 5% of ethanol at 45 and 50$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1436-1438
• /
• 2001

The $\beta$-SiC + $ZrB_2$ ceramic electroconductive composites were pressureless-sintered and annealed by adding 12wt% $Al_2O_3$ + $Y_2O_3$ (6 : 4wt%) powder as a function of sintering temperature. The relative density showed the highest value of 81.1% at 1900$^{\circ}C$ sintering temperature. The phase analysis of the composites by XRD revealed of $\alpha$-SiC(6H), $TiB_2$, $Al_5Y_2O_{12}$ and $\beta$-SiC(15R). Flexural strength showed the highest value of 230 MPa for composites sintered at 1900$^{\circ}C$. The vicker's hardness and the fracture toughness showed the highest value of increased with increasing sintering temperature and showed the highest of 9.88 GPa and 6.05 $MPa{\cdot}m^{1/2}$ at 1900$^{\circ}C$. The electrical resistivity was measured by the Pauw method from 25$^{\circ}C$ to 700$^{\circ}C$. The electrical resistivity of the composites showed the PTCR (Positive Temperature Coefficient Resistivity).

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.169-185
• /
• 2018

Customers are not merely responders but rather active value creators. As a result most researches related to customer value creation behavior focus on customer participation behavior and interaction between service provider and customer. This study set the research model to examine the correlation between customer to customer interaction, brand attachment and customer value creation behavior. For this study, the relationship among social support, C-to-C social interaction, similarity, brand attachment, and customer value creation behavior were modelled and used to validate our hypotheses. A path model was verified with structural equation modeling using dataset from survey. Results of this study are summarized as follows. First, this study show the C-to-C social interaction, such as social support, C-to-C social interaction, similarity have effects on brand attachment. Thus, this was statistically significant although dismissed from hypothesis verification. Second, the structural correlation shows brand attachment has positive effect on customer value creation behavior The findings suggest that managers need to identify and pay attention to positive customer to customer interaction in the service encounter so that it influence customer brand attachment and customer value creation behavior which is the competitive advantages of service brand.