• Korean Journal of Environmental Agriculture
• /
• v.14 no.1
• /
• pp.88-96
• /
• 1995

The research was carried out in tray ($0.12m^2$) in greenhouse ($30{\pm}2^{\circ}C$${\sim}$$25{\pm}2^{\circ}C$) equipped with Auto Foggy System (SAE KI RIN Co.) and results are summarized as follows: 1. Bifenox and bensulfuron retarded the growth of rice under foggy condition and the weeding efficacy among the herbicides tested was not different. 2. Weeds under foggy condition emerged at smaller amounts than under the non-foggy condition. bensulfuron, molinate and bifenox showed the high weeding efficacy. There was a tendency that molinate reduced the number of tillers at 20 and 60 days after transplanting. 3. Among the herbicides tested, only the molinate reduced the dry weight and yield of rice significantly.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.75-83
• /
• 2013

The present study was examined seed germination and growth characteristics of Cynanchum wilfordii under the following conditions such as soaking temperature, concentrations of $GA_3$, trays and soil types, and shading conditions. In seed pre-treatment, germination rate was the highest at 93% when soaked in 100 ppm $GA_3$ at $20^{\circ}C$ and seedling growth was best in 50 plug cell tray. Physiological quality was best in the condition in which seeds were treated with 10 ppm $GA_3$ at $20^{\circ}C$. Taking into consideration the seedling growth, their physiological quality as well as economical aspects, seedlings with plant height (over 10 cm) and root length (over 10 cm) were grown vigorously 30-45 days after the seeds were sown in mid-April in TKS, TKS+perlite and TKS+rice hull of 128 or 200 plug cell tray.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.59-67
• /
• 1992

The duration of raising seedling of infant rice seedling(IRS) in machine transplanting is 8 to 10 days. This experiment was conducted to investigate the minimum duration of IRS's raising seedling and its method by the combination of several treatments such as plant growth regulator, root-break-seat and temperature. The rice seeds of Hwaseongbyeo was soaked in the solution of metalaxyl for 24 hours at room temperature. Metalaxyl (25% wettable powder), a fungicide, was used in 1, 000 times dilution as a promting substance on the root-mat formation of IRS. The application of fungicide in the nursery soil for the controlling of damping-off and physiologyical seedling rot was omitted due to the metalaxyl seed-soaking treatment. Seeding rate was 220g per seed tray (30$\times$60$\times$3cm). To promote the root-mat formation of IRS, the sheets of polyethylene vinyl and absorptive paper were placed bottom the seed tray. The root-mat formation of IRS was promoted at higher temperature and longer duration of raising seedling. The metalaxyl-treated seeds markedly increased the root length and rooting activity of IRS as compared with the control, thus the root-mat formation was excellent. The absorptive paper with polyethylene vinyl as root-break-seat showed a better root-mat formation compared with control, polyethylene vinyl, alone. The minimum duration of raising seedling of IRS was 5 days after sowing based on the root-mat formation and seedling height under the condition of metalaxyl seed treatment, absorptive paper with polyethylene vinyl as a root-break-seat and the raising seedling temperature 30/2$0^{\circ}C$ (day /night).

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.194-200
• /
• 2017

This study aimed to determine the suitable of harvest time on the growth and quality of baby leafy vegetables (Agastsche rugosa O. Kuntze and Lepidium sativum L.) grown on rice seedling tray in a six-layered bench system at 30cm intervals in order to exploit the space during rice growing off-season. Seedlings were grown on the rice seedling tray for 10 days after sowing with coir substrate supplied with nutrient solution at EC $1.5dS{\cdot}m^{-1}$ every 2 days prior to placing the tray on the bench, which were at $1^{st}$ (Low) layer above 20cm and $6^{th}$ (High) layer above 170cm apart from the ground. Growth and phytochemical contents were measured at 7-day and 14-day harvest time. During the culture periods, daily average of integrated solar radiation and temperature were $9.3{\sim}9.6MJ{\cdot}m^{-2}$, $27.5^{\circ}C$ in the High layer and $5.1{\sim}6.2MJ{\cdot}m^{-2}$ in average, and $26.5{\sim}26.6^{\circ}C$ in the Low layer, respectively. For A. rugosa, the highest growth was observed in the Low layer bench at a 14-day harvest time, while their plant height in the High layer was shorter and the leaf number was lower. For L. sativum, the plant height, leaf length and width, leaf number and fresh weight were higher in the Low layer. For A. rugosa, a high yield was observed with the increase in integrated temperature and integrated solar radiation, while a higher yield of L. sativum was found with the increase in integrated temperature, but not with integrated solar radiation. For A. rugosa, both polyphenol and anthocyanin contents were higher in the High layer at a 14-day harvest time. For L. sativum, polyphenol contents were higher in the High layer, whereas no significant difference in anthocyanin and flavonoid contents was observed depending on the layer and harvest time. The highest chlorophyll content showed in Low layer at a 7-day harvest time in both A. rugose and L. sativum. All of the results suggest that in terms of growth and quality, it may be better growing in the high layer for 14 days after seedling in A. rugosa, and low layer for 7 days in L. sativum.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.974-977
• /
• 2005

Automatic lens assembly system is used for automatically assembling the lens module of phone camera. In this paper, we are trying to develop the cluster type automatic lens assembly with standard tray for applying for assembly field directly. This paper proposes the principle of cluster type lens assembly system and the related assembly production line concept for optimal automatic lens production line.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1299_1300
• /
• 2009

We show results that examine about electrical properties of XLPE insulated 6.6kV cable termination by mechanical damage. The cable used to produce the cable termination is 6/10kV tray XLPE fire retardant electric cable (6/10kV TFR-CV $35SQMM{\times}1C$) which is domestically made. We apply force to XLPE insulator and made mechanical defect using knife. Defected samples go through the withstand voltage test according to the IEEE std. 48 test regulations and lighting impulse (hereunder, IMP) withstand voltage test regulations. Then the effects of the scars shown during the construction process on electric accidents at the end part are analyzed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.397-399
• /
• 2001

레이저를 이용한 마킹(marking) 시스템은 미러(mirror)를 움직이는 XY Scanner안 모터의 Thermal drift로 인한 오차와 laser 오류에 의해 마킹의 불량을 초래하게 된다. 따라서, 이 마킹 불량을 검사하기 위해 마킹 시스템에는 비젼(Vision)을 이용한 검사 장비가 탑재된다. 현재 웨이퍼 마킹기나 다른 마킹기의 비젼시스템은 후검사(post vision) 시스템을 도입하고 있다. 하지만, 후검사 시스템의 경우 마킹이 잘못되었을 때, 바로 마킹을 중지하지 못하고 적어도 한 단위 마킹(tray, 웨이퍼, Strip, PCB 등등)을 망치게 되고, 만일 마킹 대상물이 고가인 경우 상당한 금액의 손실을 가져오는 단점을 가지고 있다. 이러한 단절을 보완하기 위해 본 논문에서는 CPVS(Concurrent Processing Vision System)라는 시스템을 구현하였다. 이 시스템은 마킹과 마킹 품질검사를 동시에 병행함으로써 마킹이 잘못되었을 때 마킹을 중단하게 되어 더 이상의 손실이 나지 않게 하고 후처리 검사 시스템으로의 이송과정을 생략함으로써 processing time을 줄이고, 생산성을 높인다는 장점을 가지게 된다. 이 시스템의 구현은 Visual C++의 MFC 라이브러리를 사용한 MDI구조로 구현하였다.

• Food Science and Preservation
• /
• v.1 no.2
• /
• pp.93-98
• /
• 1994

Fresh ginseng was packed by using available commercial plastic films of polyvinyl chloride (PVC), cast polypropylene (CPP) and low density polyethylene (LDPE). PVC was used as a wrapping on polystyrene tray, and CPP and LDPE were applied as pouch packages. Gas composition of the package and keeping quality of ginseng in the packages were evaluated for 20 day storage at 5$^{\circ}C$. LDPE (27$\mu\textrm{m}$ thick) Package modified the Package atmosphere to 11.7% O2 and 2.1% CO2, gave low microbial growth and good sensory score after 20 day storage.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.165.1-165
• /
• 2003

복숭아는 절단 후 표면의 갈변현상이나 당도 저하 등이 발생하여 신선편이 식품화시 품질열화의 원인이 된다. 이에 본 실험에서는 일차적으로 유명 품종에 한해 fresh-cut peach의 anti-browning chemicals를 탐색하고, 그 결과를 통해 이차적으로 효과가 우수한 chemicals를 선정하여 백향 품종에 농도별 실험을 행하였다. 유명 품종을 반으로 절단한 후 제핵하고 8등분하여 1% ascorbic acid, 1% sodium chloride, 1% sodium ascorbate monohydrate, 0.005% 4-hexylresorcinol 용액에 3분간 침지시켜 draining한 후, PP tray에 담고 PP film으로 밀봉하여 4$^{\circ}C$에서 저장하였다. 가용성고형분은 to sodium chloride 용액으로 처리한 구에서 가장 높게 유지되었고 pH 또한 비교적 일정하였으며, 1% sodium chloride과 1% sodium ascorbate monohydrate 용액으로 처리한 구의 L값이 높게 유지되었다. 따라서 fresh-cut peach에 효과가 있는 것으로 판단되는 이 두 chemicals의 농도별 용액을 조제하여 같은 방법으로 백향 품종의 갈변저해제로서 처리하였다. 그 결과 2% sodium chloride의 가용성고형분이 가장 높게 유지되었으며 2% sodium ascorbate monohydrate 다음으로 2% sodium chloride 용액 처리구의 L값의 변화 양상이 가장 양호한 것으로 나타났다. 따라서 종합적으로 살펴볼 때, 2% sodium chloride 용액의 처리가 fresh-cut peach의 품질 변화 억제에 적합하다고 판단되었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.307-312
• /
• 2000

This study was carried out to develop an automatic grafting system suitable for fruit-vegetable seedlings. The study consisted of two research sections: 1) development of a medium-sized, low-cost automatic grafting system for cooperative farms and commercial seedlings production company, and 2) commercializing research for prototype development based on the above concepts. The grafting robot developed in this research can be described as follows, a. Developed grafting robot can cover the whole operations for grafting scion and rootstock, only if operator provides scion and rootstock tray. b. Five seedlings can be grafted at one time, and about 1,200 seedlings can be grafted in one hour. c. The success ratio of mechanical grafting scion and rootstock with ceramic pin bonding provided by the holder is more than 95% when the conditions of seedlings are satisfied. d. The grafting efficiency has improved over 10 times compared with manual work, and the grafting cost generated 44% savings.