• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1851-1859
• /
• 2000

Crude oil-degrading bacteria were isolated from the sites contaminated by oil products. The isolates were identified as Acinetobacter sp. A132, Pseudomonas putida A422, Pseudomonas aeruginosa F721, F722, and Xanthomonas maltophilia B823. The results of investigation on the degradability of crude oil indicated that the strain A132 had the highest rate of $6.04g/L{\cdot}day$. Also, the strain A132 and F722 almost degraded each of n-alkane compounds between $nC_{10}$ and $nC_{32}$. The strain A422 degraded benzene and xylene but not n-alkane. The strain B823 grew somewhat in crude oil but did not entirely degrade other substrates used in this study. The results of the GC/FID analysis on the degradability of the mixed n-alkane compounds showed that the strain F722 could degrade 100% of the compounds with $nC_7{\sim}nC_{10}$ and more than 80% of those with $nC_{11}{\sim}nC_{24}$.

• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.203-210
• /
• 1997

The difrrrenlial display reverse transcription polymerase chain reaction (DDRT-PCR) aniilysis roils performed to identify the pathogellir strain specific amplicons. mRNAs were purified from the trophozoites of the pathogenif strain YS-27 and the non-pathogenic strain S 16. respectively. Three kinds of rirsl stranded rDNAs were reverse transcribed from the mRNAs by one base anchored oligo-dT 11M (M: A. C, or G) primers. Each cDNA lemplatr was used for DDRT-PCK analysis. A total of 144 pathogenic strain specific amplicons was observed in DDRT-PCR analysis using primer combinations of the 11 arbitrary primers and the 3 one base anchored oli해-dT11M primers. Of these 31 amplit'tons were verified as the amplirons amplified only from the mRNAs of the pathogenic strain by DNA slots biol llybridizatioil. Furthel cklaracleization of the 31 pathogenic strain sprcifil amplicons by DNA slot blot hybridlnation analysis using biotin labeled Probes or the PCR amplified DNA of rysteine proteinase genes revealed that 21 of them were amplliried from the maNAs of the cysteine proteinase genes. Four randomly selected amplirons out of the rest 10 amplirons were used fur screening of cDNA library followed by immunoscreening and all of them were turned outs to be amplified from the mRNA.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.5
• /
• pp.575-581
• /
• 2022

A Gram-stain-negative, white-coloured, and rod-shaped bacterium, strain DR4-4^T, was isolated from Daechung Reservoir, Republic of Korea, during Microcystis bloom. Strain DR4-4^T was most closely related to Caenimonas terrae SGM1-15^T and Caenimonas koreensis EMB320^T with 98.1% 16S rRNA gene sequence similarities. The average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values between strain DR4-4^T and closely related type strains were below 79.46% and 22.30%, respectively. The genomic DNA G+C content was 67.5%. The major cellular fatty acids (≥10% of the total) were identified as C_16:0, cyclo C_17:0, summed feature 3 (C_16:1ω7c and/or C_16:1ω6c), and summed feature 8 (C_18:1ω7c and/or C_18:1ω6c). Strain DR4-4^T possessed phosphatidylethanolamine, diphosphatidylglycerol, and phosphatidylglycerol as the main polar lipids and Q-8 as the respiratory quinone. The polyamine profile was composed of putrescine, cadaverine, and spermidine. The results of polyphasic characterization indicated that the isolated strain DR4-4^T represents a novel species within the genus Caenimonas, for which the name Caenimonas aquaedulcis sp. nov. is proposed. The type strain is DR4-4^T (=KCTC 82470^T =JCM 34453^T).

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.1
• /
• pp.5-11
• /
• 2007

Internal stress variation in the face slab concrete induced by reservoir water pressure may affect on the stability of the dam so that the reclamation type of strain gauge is applied for measuring internal stress variation. In this study, internal as well as external stress variation of dam was measured by using strain gauge that was reclaimed to the ${\circ}{\circ}$ dam. In the result, it was confirmed that other measurements by relevant gauges need to be supplemented as the use of strain gauge only is insufficient to evaluate the stability analysis and global behavior of the dam.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.285-288
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. Tensile tests and R-value tests were carried out at several levels of temperature and strain-rate from $25^{\circ}C$ to $300^{\circ}C$ and 0.16 to 0.00016/s, respectively to obtain the mechanical properties of AZ31B magnesium alloy sheet. The FLD of this material was experimentally obtained by limit dome height tests with the punch velocity of 0.1 and 1.0 mm/s at $250^{\circ}C$. The M-K theory-based FLD predicted using Yld2000-2d yield criterion was compared with the experimental results.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.75-83
• /
• 2012

PURPOSES: Suggestion of asphalt binder constitutive model based on time-temperature superposition principle and overstress concept in order to describe behavior of asphalt binders. METHODS: A series of temperature sweep tests and multiple stress creep and recovery(MSCR) tests are performed to verify the applicability of time-temperature superposition principle(t-Ts) and to develop viscoelastoplastic constitutive equation based on overstress concept. For the tests, temperature sweep tests at various high temperature and various frequency and MSCR test at $58^{\circ}C$, $64^{\circ}C$ $70^{\circ}C$, $76^{\circ}C$, and $82^{\circ}C$ are performed. From the temperature sweep tests, dynamic shear modulus mastercurve and time-temperature shift function are built and the shift function and MSCR at $58^{\circ}C$ are utilized to determine model coefficients of VBO model. RESULTS: It is observed that the time-temperature shift function built at low strain level of 0.1% is applicable not only to 1.0% strain level temperature sweep test but also maximum 500,00% strain level of MSCR test. As well, the modified VBO model shows perfect prediction on MSCR measured strain at the other temperatures. CONCLUSIONS: The Time-temperature superposition principle stands hold from very low strain level to very high strain level and that the modified VBO model can be applicable for various range of strain and temperature region to predict elastic, viscoelastic, and viscoplastic strain of asphalt binders.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.133-141
• /
• 2006

The Low cycle fatigue behavior of 11.7Cr-1.1Mo heat-resisting steel has been investigated under strain-controlled conditions with mean stresses at room temperature and $300^{\circ}C$. For the tensile mean stress test, the initial high tensile mean stress generally relaxed to zero at room temperature, however, at $300^{\circ}C$ initial tensile mean stress relaxed to compressive mean stress. Low cycle fatigue lives under mean stress conditions are usually correlated using modifications to the strain-life approach. Based on the fatigue test results from different stain ratio of -1, 0, 0.5, and 0.75 at room temperature and $300^{\circ}C$, the fatigue damage of the steel was represented by using cyclic strain energy density. Total strain energy density considering mean stress indicated well better than not considering mean stress at $300^{\circ}C$. Predicted fatigue life using Smith-Watson-Topper's parameter correlated fairly well with the experimental life at $300^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1398-1408
• /
• 2003

Tensile and LCF(low cycle fatigue) tests were carried out in air at wide temperature range 20$^{\circ}C$-750$^{\circ}C$ and strain rates of 1${\times}$10$\^$-4//s-1${\times}$10$\^$-2/ to ascertain the influence of strain rate on tensile and LCF properties of prior cold worked 316L stainless steel, especially focused on the DSA(dynamic strain aging) regime. Dynamic strain aging induced the change of tensile properties such as strength and ductility in the temperature region 250$^{\circ}C$-600$^{\circ}C$ and this temperature region well coincided with the negative strain rate sensitivity regime. Cyclic stress response at all test conditions was characterized by the initial hardening during a few cycles, followed by gradual softening until final failure. Temperature and strain rate dependence on cyclic softening behavior appears to result from the change of the cyclic plastic deformation mechanism and DSA effect. The DSA regimes between tensile and LCF loading conditions in terms of the negative strain rate sensitivity were well consistent with each other. The drastic reduction in fatigue resistance at elevated temperature was observed, and it was attributed to the effects of oxidation, creep and dynamic strain aging or interactions among them. Especially, in the DSA regime, dynamic strain aging accelerated the reduction of fatigue resistance by enhancing crack initiation and propagation.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.7
• /
• pp.1300-1305
• /
• 2017

A rod shaped, aerobic, Gram-stain-negative, and motile bacterium, strain $AR2^T$, was isolated from a water sample of Yeongsan river, Republic of Korea. Strain $AR2^T$ clustered closely with the members of the genus Chitinimonas and showed the highest 16S rRNA gene sequence similarity with Chitinimonas prasina $LY03^T$ (96.4%), Chitinimonas viridis $HMD2169^T$ (96.4%), Chitinimonas taiwanensis $cf^T$ (96.2%), and Chitinimonas koreensis $R2A43-10^T$ (94.2%). The predominant fatty acids of strain $AR2^T$ were identified to be summed feature 3 (comprising $C_{16:1}{\omega}7c$ and/or $C_{16:1}{\omega}6c$), $C_{16:0}$, and $C_{10:0}3-OH$. Diphosphatidylglycerol, phosphatidylglycerol, and phosphatidylethanolamine were found to be the major polar lipids. The genomic DNA G+C content was 60.4 mol%. Based on the polyphasic characterization, the isolated strain $AR2^T$ is described as a representative of a novel species in the genus Chitinimonas, for which the name Chitinimonas naiadis sp. nov. (type strain =$AR2^T$ =KCTC $42755^T$ =JCM $31504^T$) is proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.97-100
• /
• 2001

This paper presents the characteristics of Ta-N thin-film strain gauges as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4∼16 %)N$_2$). These films were annealed for 1 hour in 2x10$\^$-6/ Torr vaccum furnace range 500∼1000$^{\circ}C$. The optimized conditions of Ta-N thin-film strain gauges were annealing condition(900$^{\circ}C$, 1 hr.) in 8% N$_2$ gas flow ratio deposition atmosphere. Under optimum conditions, the Ta-N thin-films for strain gauges is obtained a high resistivity, $\rho$=768.93 ${\mu}$Ω cm, a low temperature coefficient of resistance, TCR=-84 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal gauge factor, GF=4.12.