• 한국전기전자재료학회논문지
• /
• 제22권1호
• /
• pp.41-46
• /
• 2009

The low dielectric SiOCH films were deposited on p-type Si(100) substrates through the dissociation of BTMSM $(((CH_3)_3Si)_2CH_2)$ precursors with oxygen gas by using PECVD method. BTMSM precursor was introduced with the flow rates from 42 to 60 sccm by 2 sccm step into reaction chamber but with the constant flow rate of 60 sccm $O_2$. SiOCH thin films were annealed at $450^{\circ}C$ for 30 minutes. The electrical property of SiOCH thin films was studied by MIS, Al/SiOCH/p-Si(100), structure. Annealed samples showed large reduction of the maximum capacitance yielding low dielectric constant owing to reductions of surface charge density. After exposure at room temperature and atmospheric pressure, dielectric constant of SiOCH films was totally increased. However, annealed SiOCH thin films were more stable than as-deposited SiOCH thin films for natural oxidation.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1345-1348
• /
• 2013

We investigated the tribochemical and wear properties of Polytetrafluoroethylene (PTFE) based polymer matrix composites with nanoceramic (NC) ${\beta}$-sialon, and $Al_2O_3$ particles for the mechanical seal applications at low temperature. SEM showed that NC particles were homogeneously distributed in the polymer matrix and initiated the formation of the supramolecular spherulites around NC. From the temperature stimulated depolarization (TSD) current results, it was analyzed that the surface charge on nanoceramic affected the formation of the spherulites structure. 2 wt % $Al_2O_3$ NC did not degrade the mechanical properties of PTFE so that composites showed the similar values of tensile strength, elongation at the rupture and friction coefficient as those of neat PTFE. However, the composite with 2 wt % $Al_2O_3$ NC revealed the improved wear resistance, wear rate of 0.4-1.2 mg/h at room temperature and 0.28 mg/h at $-40^{\circ}C$, respectively, while the neat PTFE the 70-75 mg/h at room temperature and 70.3 mg/h at $-40^{\circ}C$.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.13-17
• /
• 2008

In this paper, in order to get the characteristics of the lithium secondary cell, such as charge and discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc, we build a thermal model that estimate the impedance of battery by experiment & simulation. In this one-dimensional model, Seven governing equations are made to solve seven variables c, $c_s,\;\Phi_1,\;\Phi_2,\;i_2$, j and T. The thermal model parameters used in this model have been adjusted according to the experimental data measured in the laboratory. The result(Voc, Impedance) of this research can be used in BMS(Battery Management System), so an efficient method of using battery is developed.

• 한국유기농업학회지
• /
• 제29권1호
• /
• pp.1-23
• /
• 2021

The form of agri-food transaction has taken a rapid change from the existing method since Covid-19. In response to changes in the market environment such as Covid-19, the integrated marketing organization in Jeollabuk-do was diagnosed from the point of view of innovation, and the future direction was examined. In order to improve the distribution structure of the production area, an integrated marketing organization was fostered, and both quantitative and qualitative growth were brought about. However, some regions still lack willingness to participate and lack of expertise. In particular, there is no infrastructure and strategy to prepare for the increase in non-face-to-face transactions post Covid-19. Online transactions also require economies of scale, so non-face-to-face transaction capabilities must be reinforced by adding a separate organization and experts in charge of online transaction functions within the integrated marketing organization. In the future, online sales are highly likely to expand not only to transactions between producers and individual consumers (C to C), but also to mass consumer (B to B) transactions. It will be an opportunity. In addition, it is necessary to efficiently use production area distribution facilities such as sorting and packaging. Since the non-contact transaction method will increase after Corona 19, it is necessary to strengthen marketing capabilities such as expansion of utilization rate, order placement, settlement, and customer management, and reorganization of specialized organizations.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.171-183
• /
• 2022

The performance and inhibitory action of the aqueous extract of Cyperus Conglomeratus's leaves against corrosion of XC70 steel in a 1M HCl acid medium are studied by the determination of the weight loss, the potentiodynamic polarization curves analysis, and electrochemical impedance measurements (electrochemical techniques). The corrosion inhibitory efficiency of XC70 steel increases with the increasing concentration of the green inhibitor, however, the corrosion rate of the steel decreases. Weight loss measurements show that the maximum percentage corrosion inhibition efficiency is approximately 61.86%, while the analysis of the mixed character polarization curves shows that the inhibitor could achieve an inhibition efficiency of 86.96%. The electrochemical impedance study confirmed that the value of the charge transfer resistance (R_ct) increases and the value of the double layer capacity (C_dl) decreases with increasing concentration of the aqueous extract of Cyperus Conglomeratus's leaves, thus increasing the inhibition efficiency. The study showed that this aqueous extract acts by adsorption on the metal surface; this adsorption follows the Langmuir isotherm. This research work showed that Cyperus Conglomeratus leaves extract acts as an effective and eco-friendly inhibitor on mild steel in an acid medium.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.30-37
• /
• 2020

In the building construction, the steel-frame work occupies an important position in terms of structure, cost and quality. Especially in Japan, steel frames have traditionally been the main structure of many buildings. For steel-frame works in such positions, this paper investigates an existing steel fabricator to clarify the actual conditions of design decision making process and management method in steel production process. This study focuses on a steel fabricator (Company M in the following sentences), whose main market is Japan and which has facilities in Thailand, China, and Japan. Company M uses QR codes to control the production status of products, and exchanges all information between inside and outside the company via specialized departments in the form of documents. The authors have already analyzed the relationship between production lead time and defect rate based on actual project data at Architectural Institute of Japan in 2016. In 2019, we expressed the process from the confirmation of the design information of the current steel frame to the production by WBS, and clarified the relationship between the production lead time and steel frame product quality structurally. In this paper, the authors reoport the progress of the survey conducted so far, the positioning of the collected data, and the future survey policy.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.142-149
• /
• 2020

본 연구에서는 인조흑연의 낮은 이론용량을 개선하기 위하여 음극소재로서 흑연/실리콘/피치 복합소재의 전기화학적 성능을 조사하였다. 구형의 인조 흑연 표면을 polyvinylpyrrolidone (PVP) 양친성 물질로 코팅한 후 실리카를 성장시켜 흑연/실리카 소재를 합성하였으며, 석유계 피치 코팅과 마그네슘 열 환원법을 통해 흑연/실리콘/피치 복합소재를 제조하였다. 흑연/실리콘/피치 복합소재의 전극은 poly(vinylidene fluoride) (PVDF), carboxymethyl cellulose (CMC), polyacrylic acid (PAA) 바인더에 따라 제조하였으며, 다양한 전해액과 첨가제를 이용하여 전지를 조립하였다. 흑연/실리콘/피치 복합소재는 X-ray diffraction (XRD), scanning electron microscope (SEM)와 thermogravimetric analyzer (TGA)를 통해 물리적 특성을 분석하였으며, 전기화학적 특성은 충 방전 사이클, 율속, 순환전압전류, 임피던스 테스트를 통해 조사하였다. 흑연/실리콘/피치 복합소재는 흑연 : 실리카 : 피치 = 1 : 4 : 8일 때 높은 사이클 안정성을 보였다. PAA 바인더를 사용하여 제조된 전극은 높은 용량과 안정성을 보였으며, EC:DMC:EMC 전해액을 사용하였을 때 719 mAh/g의 높은 초기 용량과 우수한 사이클 안정성 나타내었다. 또한 vinylene carbonate (VC) 첨가시에 2 C/0.1 C 일 때 77% 용량 유지율과 0.1 C/0.1 C 일 때 88% 용량 회복을 나타냄을 확인하였다.

• 전기화학회지
• /
• 제15권3호
• /
• pp.172-180
• /
• 2012

리튬이온전지의 양극소재인 $LiMn_2O_4$를 다양한 모양과 크기의 망간산화물 및 망간수산화물 전구체를 사용해서 합성하였다. 첫 번째 단계로 수열합성법이나 침전법을 사용하여 ${\alpha}-MnO_2$, ${\beta}-MnO_2$, $Mn_3O_4$, amorphous $MnO_2$ 및 $Mn(OH)_2$ 등의 전구체를 합성하였고, 두 번째 단계로 이들 전구체로부터 고상법을 사용하여 다양한 형태의 $LiMn_2O_4$를 제조하였다. 합성된 $LiMn_2O_4$의 특성은 주사전자현미경과 XRD Rietveld구조분석을 통해 확인하고, Li coin cell로 조립하여 전극특성을 측정하였다. 500 nm크기의 팔면체(nano-octahedron) $LiMn_2O_4$가 1 C-rate와 50 C-rate에서 각각 107 mAh $g^{-1}$, 99 mAh $g^{-1}$의 높은 전지용량을 나타내며, 다양한 방전전류에서 가장 우수한 전기화학적 특성을 보인다. 3차원 팔면체 결정입자가 1차원 막대모양이나 2차원 판상모양의 다른 형태의 $LiMn_2O_4$보다 구조적 안정성도 우수한 것으로 평가된다. 또한 10 C-rate의 높은 전류로 500회 충 방전이 진행된 후에도 nano-octahedron $LiMn_2O_4$는 단지 5%의 용량감소(95% capacity retention)로 우수한 전극특성을 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2689-2693
• /
• 2012

Single-walled carbon nanotubes (SWNTs) and $C_{60}$-encapsulated SWNTs ($C_{60}@SWNTs$) are introduced to Ru-sensitized photoelectrochemical cells (PECs), and photocurrents are compared between two cells, i.e., an $RuL_2(NCS)_2$/DAPV/SWNTs/ITO cell and an $RuL_2(NCS)_2$/DAPV/$C_{60}@SWNTs$/ITO cell. [L = 2,2'-bipyridine-4,4'-dicarboxylic acid, DAPV = di-(3-aminopropyl)-viologen, and ITO = indium-tin oxide] The photocurrents are increased by 70.6% in the presence of $C_{60}@SWNTs$. To explain the photocurrent increase, the reverse-field emission method is used, i.e., $RuL_2(NCS)_2$/DAPV/SWNTs/ITO cell (or $RuL_2(NCS)_2$/DAPV/$C_{60}@SWNTs$/ITO cell) as an anode and a counter electrode Pt as a cathode in the external electric field. The improved field emission properties, i.e., ${\beta}$ (field enhancement factor) and emission currents in the reverse-field emission with $C_{60}@SWNTs$ indicate the enhancement of the PEC electric field, which implies the improvement of the electron transfer rate along with the reduced charge recombination in the cell.

• 전기화학회지
• /
• 제11권4호
• /
• pp.304-308
• /
• 2008

Noble Poly (lithium 2-acrylamido-2-methyl propane sulfonate) and its copolymer with N-vinyl formamide based on trihexyl (tetradecyl) phosphonium acetate [$(C_6H_{13})_3$ P ($C_{14}H_{29}$) $CH_3COO$; $P_{66614}$ $CH_3COO$] and trihexyl (tetradecyl)phosphonium bis(trifluoromethane sulfonyl) amide ([$(C_6H_{13})_3P(C_{14}H_{29})$] [TFSA];$P_{66614}TFSA$) were prepared and analyzed to determine their characteristics and properties. The ionic conductivity of a copolymer based $P_{66614}TFSA$ ionic liquid system exhibits a higher conductivity ($8.9{\times}10^{-5}Scm^{-1}$) than that of a copolymer based $P_{66614}CH_3COO$ system ($1.57{\times}10^{-5}Scm^{-1})$. The charge on the TFSA anion is spread very diffusely through the S-N-S core and particularly in the trifluoromethane groups, and this diffusion results in a decreased interaction between the cation and the anion. The viscosity of $P_{66614}TFSA$ (39 cP at 343 K) and $P_{66614}CH_3COO$ (124 cP at 343 K), which is very hydrophobic, was fairly high. High viscosity leads to a slow rate of diffusion of redox species. The ionic conductivity of copolymer of a phosphonium ionic liquid system also exhibits higher conductivity than that of a homopolymer system. Phosphonium ionic liquids were thermally stable at temperatures up to $400^{\circ}C$.