• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.342-343
• /
• 2013

AlSb is a promising material for optical devices, particularly for high-frequency and nonlinear-optical applications. And AlSb offers significant potential for devices such as quantum-well lasers, laser diodes, and heterojunction bipolar transistors. In this work we study molecular beam epitaxy (MBE) growth of an unstrained AISb film on a GaAs substrate and identify the real-time monitoring capabilities of in situ spectroscopic ellipsometry (SE). The samples were fabricated on semi-insulating (0 0 1) GaAs substrates using MBE system. A rotating sample stage ensured uniform film growth. The substrate was first heated to $620^{\circ}C$ under As2 to remove surface oxides. A GaAs buffer layer approximately 200 nm- thick was then grown at $580^{\circ}C$. During the temperature changing process from $580^{\circ}C$ to $530^{\circ}C$, As2 flux is maintained with the shutter for Ga being closed and the reflection high-energy electron diffraction (RHEED) pattern remaining at ($2{\times}4$). Upon reaching the preset temperature of $530^{\circ}C$, As shutter was promptly closed with Sb shutter open, resulting in the change of RHEED pattern from ($2{\times}4$) to ($1{\times}3$). This was followed by the growth of AlSb while using a rotating-compensator SE with a charge-coupled-device (CCD) detector to obtain real-time SE spectra from 0.74 to 6.48 eV. Fig. 1 shows the real time measured SE spectra of AlSb on GaAs in growth process. In the Fig. 1 (a), a change of ellipsometric parameter ${\Delta}$ is observed. The ${\Delta}$ is the parameter which contains thickness information of the sample, and it changes in a periodic from 0 to 180o with growth. The significant change of ${\Delta}$ at~0.4 min means that the growth of AlSb on GaAs has been started. Fig. 1b shows the changes of dielectric function with time over the range 0.74~6.48 eV. These changes mean phase transition from pseudodielectric function of GaAs to AlSb at~0.44 min. Fig. 2 shows the observed RHEED patterns in the growth process. The observed RHEED pattern of GaAs is ($2{\times}4$), and the pattern changes into ($1{\times}3$) with starting the growth of AlSb. This means that the RHEED pattern is in agreement with the result of SE measurements. These data show the importance and sensitivity of SE for real-time monitoring for materials growth by MBE. We performed the real-time monitoring of AlSb growth by using SE measurements, and it is good agreement with the results of RHEED pattern. This fact proves the importance and the sensitivity of SE technique for the real-time monitoring of film growth by using ellipsometry. We believe that these results will be useful in a number of contexts including more accurate optical properties for high speed device engineering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.734-739
• /
• 2016

The globe valve is a linear motion valve that is designed primarily to stop, start, and regulate flow. The disk of a globe valve can be removed totally from the flow path or it can completely close the flow path. In this study, numerical analysis using ANSYS-CFX was initially performed to predict the flow coefficient and build a prototype model of a globe valve. The flow coefficient is the volume of water at $15.6^{\circ}C$ that will flow per minute through a valve with a pressure drop of 1 psi across the valve. In other words, it is an important factor for determining the size of the valve. From the analysis results, the fluid flux of water and flow coefficient of the valve were extracted. From the numerical results, a prototype of ultra-fine precision control valve, which can regulate the fluid flow of range 0 ~ 0.1 gal per min, was developed. The experimental results were compared with the numerical results using the flow coefficient ($C_v$) graph. From the comparative results, the flow coefficient ($C_v$) error percentage between the numerical and experimental results was very low, which is acceptable, proving that the proposed prototype model is convincing. In addition, it is possible to predict the flow coefficient using only numerical analysis.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.11a
• /
• pp.102-102
• /
• 2001

Taurine (2-ethaneaminosulfonic acid) is one of the major intracellular ${\beta}$ -amino acids in mammals and is required for a number of biological processes including membrane stabilization, osmoregulation, antioxidation, detoxification, modulation of calcium flux and neurornodulation. The taurine transporter (TAUT) which contains 12 hydrophobic membrane-spanning domains has been cloned from dog kidney, rat brain, mouse brain, human thyroid, placenta and retina. In this study, The TAUT cDNA from the human intestinal epithelial cell, HT-29 was cloned and sequenced. Reverse-transcription polymerase chain reaction (RT-PCR) was performed to amplify partial cDNA encoding human intestinal TAUT. The coding region of the PCR product was 732 bp long. The primers were designed to encode highly conserved amino acid sequences near the transmembrane domains III (IPYFIFLF) and Ⅵ (KYKYNSYR) both in human and mouse. The TAUT cDNA amplified was ligated into the pGEX 4T-1 expression vector. The resulting sequence of human intestinal TAUT cDNA (Accession number of NCBI Genebank is AF346763) was identical to the sequences of the TAUTs previously determined in the human placenta and retina except 3 base pairs from that of the reported human thyroid. TAUT specific antibodies were generated to use them as biological tools in the studies of the biological role of TAUT. Peptides of 149-162 amino acid residue (14 amino acids) of the TAUT were synthesized. The synthetic peptide used in this study was LFQSFQKELPWAHC. This region was chosen not only to avoid putative glycosylation sites but also to exclude regions of known homology with GABA transporters in the extracellular hydrophilic domains. The synthetic peptide, TAUT-1 was conjugated with carrier protein, kehole lympet hemocyanin (KLH) to use as an antigen. When used for immunization on a rabbit to produce polyclonal antiserum, the conjugates elicited high -titered specific anti-TAUT-1 antibodies, which reacted well with the ovalbumin (OVA) conjugated peptides in ELISA. The KLH-conjugated peptide was also used as immunizing antigen in BALB/c mice to produce TAUT specific monoclonal antibodies. From the culture supernatant of the hybridoma, the specificity of anti-TAUT-1 monoclonal antibodies was confirmed by ELISA. Further applications of more tools in TAUT expression analysis will be performed such as western blotting and flow cytometry.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.70-81
• /
• 2000

DA-5018 is a synthetic capsaicin derivative under development as a non-narcotic a analgesic ag$\varepsilon$nt. DA-50 18 showed a potent analgesic activity against acute and chronic pain m model(Tablel, 2.), but it had a narrow margin of safety. DA-5018 did not bind to opioid(${\kappa}, {\delta}, {\mu}$), NKl, CGRP receptors in vitro and its analgesic effect was not antagonized by naloxone, a and it did not develop analgesic tolerance. In addition DA-5018 had no inhibitory effects against c cyclooxygenase and 5-lipooxygenase activities. DA-5018 significantly increased the relcase of substance P from the slices of the rat spinal cord. These results suggest that DA-50 18 is not a narcotic nor aspirin-like analgesic and the release of substance P is one of analgesic mechanism of action of DA-5018. We found that DA-5018 was almost ten times more potent and was at l least IOO-times less irritable compared to capsaicin. Accordingly development of topical formula was adopted. Topical formula was desiged and screened by flux test of DA-5018 using hairless mouse skin and several formulas were selected. With these topical formulas we a assessed the analgesic efficacy and carried out the toxicity, skin irritation and pharmacokinetic studies. In streptozotocin-induced hyperalgesic rat and 50 % galactose-fed hyperalgesic rat as diabetic pain models, DA-5018 cream increased the pain thresh이ds up to 77.0% and 24.4% respectively, while Zostrix-HP(capsaicin cream) incr$\varepsilon$as cd by 65.9% and 21.0%. DA-5018 c cream showed a good analgesic effect as welI in FCA-induced arthritic rat. DA-5018 cream did not show any toxicological signs in acute and chronic toxicity test and had little skin irritation in car swclIing and scratching t$\varepsilon$st. Pharmacokinetics of DA-50 18 were studied after topical application of ${14}^C$-Iabelled or unlabelIed DA-5018 cream. Plasma and skin concentrations c except applied skin wcre below the dctection limit and after 7-day cummulative application, plasma concentrations were also below detection limit DA-50 18 may have an advantag$\varepsilon$ ov$\varepsilon$r c capsaicin and is now being developed as a topical agent for the treatment of pains. DA-50 18 cream was approved for Korean IND and is now under a Phase II clinical study for arthritic pain a after finising Phase I study. DA-50 18 was also liscensed out to Stiefel Company in America in

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.163-163
• /
• 2011

셀레늄(Selenium: Se) cracker cell을 이용하여 셀렌화한 $CuInSe_2$ (CIS)박막에 대해 연구한 결과를 발표하고자 한다. 화석연료의 과도한 사용으로 지구온난화라는 환경문제가 대두되면서 영구적이고 무상의 태양에너지 이용에 대한 필요성이 점차 높아지고 있다. 빛에너지를 전기에너지로 변화시키기 위한 태양전지는 재료에 따라 다양하게 개발되고 있으며 그 중 가장 주목을 받고 있는 것 중의 하나가 $CuInSe_2$을 광흡수층으로 하는 CIS 박막 태양전지이다. CIS 박막은 태양전지의 광흡수층으로 사용되는데 직접천이형 밴드구조를 가지고 있고, 약 $10^5$ $cm^{-1}$의 높은 광흡수계수를 가지고 있어 태양전지 광흡수층으로 적합한 물질로 각광받고 있다. CIS는 에너지 밴드갭이 ~1 eV로 실리콘과 유사한 밴드갭을 가지고 있으나 이는 Ga, Al을 In 대신 치환함으로 조절할 할 수 있다. 무엇보다도 sodalime 유리와 같은 저가의 기판위에 스퍼터와 같은 장치로 대면적 CIS 박막태양전지를 만들 수 있다는 것이 산업적인 면에서 장점으로 알려져 있다. 본 연구에서는 sodalime 유리기판 위에 스퍼터 방법으로 CIS 박막을 증착하고 Se cracker cell로 셀렌화하여 CIS 박막을 제조하는 것을 조사연구 하였다. 스퍼터를 이용하여 유리기판위에 Mo (Molybdenum)을 증착하고 그 위에 Cu-In-Se박막을 증착하였다. Cu-In-Se/Mo/유리기판 시료는 동일 챔버에서 Se cracker cell을 이용하여 셀렌화 처리 하였다. 물성비교를 위하여 Knudson-cell을 이용한 셀렌화도 시행하였다. Se cracker cell은 고체 Se를 가열하는 부분(R-zone)과 Se flux를 cracking 하는 부분(C-zone)으로 나누어져 있으며 C-zone은 700$^{\circ}C$로 고정하였다. 셀렌화 기판 온도는 425$^{\circ}C$로 고정하였고 Se cracker 온도는 330~375$^{\circ}C$까지 변화시켜 가며 CIS 박막을 제조하였다. 제조된 CIS 박막의 물성 조사는 사진, 현미경, SEM, EDX, XRD, Hall effects를 이용하였다. Se cracker cell로 셀렌화한 CIS 박막은 island 구조를 하고 있음을 알 수 있었다. CIS 박막의 island의 크기와 모양은 셀렌화시 R-zone 온도(Cu-In-Se 박막에 조사되는 셀레늄의 량)에 큰 영향을 받았다. 셀렌화시 셀레늄량이 적을 때는 island가 커지며 불균일해지고 셀레늄량이 많을 때 island가 작고 균일해지는 경향을 SEM을 통해 관찰할 수 있었다. X-ray 회절을 통해 셀레늄량이 적을 경우 CIS 결정이외의 결정이 박막내에 형성됨을 알 수 있었다. 학술회의에서 Se cracker cell을 이용한 셀렌화에 관한 보다 깊은 연구결과를 발표하고자 한다.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.235-242
• /
• 1998

Pervaporation separation of methyl tert-butyl ether (MTBE) and methanol (MeOH) mixture, of which the former compound is well known as the octane booster was carried out. Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid) which have been successfully applied on the water-alcohol mixtures were used in this study. The PVA/PAA ratio in the crosslinked membranes was 95/5, 90/10, 85/15, 80/20, and 75/25 by weight. The operating temperatures were 30, 40, and 50$\circ$C, and the compositions of MTBE and MeOH to be separated were 95/5, 90/10, and 80/20 (MTBE/MeOH) solutions. PVA/PAA=85/15 membrane showed the separation factor $\alpha_{MeOH/MTBE}$=4000 and the permeation rate of 10.1 g/m$^2$hr for MTBE/MeOH=80/20 solution at 50$\circ$. When the same membrane was used, the separation factor and permeation rate for MTBE/MeOH=90/10 solution at 40$\circ$C were $\alpha_{MeOH/MTBE}$=6000 and 8.5 g/m$^2$hr, respectively. Also, the hydrophilic/hydrophobic balance of the membranes would take an important role in the relationships between the membranes and separation performances in terms of the flux and the separation factor.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.609-617
• /
• 2010

The effect of vase water temperature and leaf number on water relations and senescence responses was determined in cut roses. Freshly harvested 'Red Sandra' roses were re-trimmed to 50 cm leaving two or four upper leaves and held in one of three solutions: ambient temperature distilled water ($23^{\circ}C$; AT-DW), low temperature distilled water ($7^{\circ}C$; LT-DW) and low temperature preservative solution (LT-PW). Flowers were kept in an environmental controlled room. Treatment effects evaluated were vase life, flower diameter, and changes in fresh weight and water uptake. Differences in water relations were determined by measuring $CO_2$ assimilation, stomatal conductance, and stem water flux rate (SFR). The water uptake rate was significantly increased in roses in LT-DW and decreased in those in LT-PW. While showing lower solution uptake rate during vase period, roses in LT-PW exhibited greatest fresh weight, longest positive water balance duration and largest flower diameter. Flowers with two leaves attached exhibited a higher fresh weight and improved water balance, thereby extending vase life. $CO_2$ assimilation rate and stomatal conductance were significantly decreased by placing flowers in LT-PW, yet increased by reducing leaf number to two leaves on the flower stems. Compared to the upper stem, the SFR of the basal stem of roses in AT-DW was lower, whereas SFR in basal stems of roses in LT-DW was much higher, suggesting that low-temperature water improved the hydraulic conductance in the stems. In contrast, roses in LT-PW had a stable SFR during the experimental period and displayed a similar pattern in SFR between upper and basal portions of the stems. Consequently, the vase life of cut roses in LT-PW and LT-DW was extended by more than eight and four days, respectively, compared to those in AT-DW.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.4
• /
• pp.327-342
• /
• 2021

The global coastal region is considered as a sink for atmospheric CO₂. Since most of the studies in the East Sea focused on the Ulleung Basin, the importance of coastal region for carbon cycle has been overlooked. In this study, we compared the biological pump and CO₂ absorption between the Ulleung Basin and coastal region by surface measurements of biological O₂ supersaturation (𝚫O₂/Ar) and partial pressure of CO₂ (fCO₂). Cold and less saline waters in the coastal regions were in contrast with a warm and saline water in the Ulleung Basin. The coastal waters near Samcheok and Pohang showed higher fluorescence, 𝚫O₂/Ar, and lower fCO₂ than those in the Ulleung Basin, indicating higher primary production and CO₂ absorption in the areas. The average net community production estimated by 𝚫O₂/Ar were 19 ± 6 and 60 ± 9 mmol O₂ m^-2d^-1 in the Samcheok and Pohang, respectively, 2-7 times higher than that of 8 ± 4 mmol O₂ m^-2d^-1 in the Ulleung Basin. Similarly, the average CO₂ flux between the seawater and atmosphere were -17.1 ± 8.9 and -25.8 ± 13.2 mmol C m^-2d^-1 in the Samcheok and Pohang, respectively, 4-5 times higher than that of -4.7 ± 2.5 mmol C m^-2d^-1 in the Ulleung Basin. In the Samcheok and Pohang, degrees of N₂ saturation were lower by 3% than that the ambient waters, suggesting the possibility of nitrogen fixation by primary producers.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.162-167
• /
• 2016

This study was carried out to investigate proper stem cutting position and air temperature to regenerate roots from cuttings of bitter gourd. 'NS454' (NS) and 'Dragon' (DR) cultivars were tested and the cutting position was cut at the 3rd node in the stem (treatment I) and cut at the central part (stem segment) between 3rd leaf and 4th leaf in the stem (treatment II). The air temperature was maintained at 18, 23, 28 and $35^{\circ}C$ in the growth chambers, respectively. The photosynthetic photon flux at the ground of a chamber was maintained in approximately $150-200{\mu}mol\;m^{-2}s^{-1}$ during the 16-hour photoperiod. The relative humidity in the chambers was maintained over 85%. After 10 days of cuttings, regardless of cutting position, DR and NS cultivars showed 100% the survival rate in the $18^{\circ}C$ or $23^{\circ}C$ treatments, however, most of plants $18^{\circ}C$ treatment had not rooting. In the $28^{\circ}C$ treatment, regardless of cutting position, DR and NS cultivars showed 100% of the rooting rate. In the $23^{\circ}C$ treatment, for DR cultivar, the node cutting showed 90% of rooting rate and the stem segment cutting showed 40% rooting rate. For NS cultivar, the node cutting showed 50% of rooting rate and the stem segment cutting showed 40% rooting rate. DR and NS cultivars have high rooting rate, while the rooting rate remarkably decreased in the $35^{\circ}C$ treatment. For DR cultivar, the stem segment cutting showed 5.3 of the highest rooting number and the node cutting showed 2.7 rooting number in the $28^{\circ}C$ treatment. NS cultivar was not significantly different the rooting regardless of cutting position. The results suggested that cutting at the stem segment cutting of bitter gourd is an effective cutting method for increasing survival rate and the air temperature should be maintained at $28^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.2
• /
• pp.68-74
• /
• 2005

The electrical arc furnace (EAF) classified as a special waste contains many flux components producing melts during a sintering process, so it decreases the sintering temperature and improves the mechanical properties of specimens. Increasing dust content in a clay-dust system brick, however, may cause the fraction defective higher due to the excessive liquid produced. To control the liquid behavior produced during sintering process for the clay-dust system specimens, the $Al_2O_3$ was added and the physical properties were analyzed. The microstructure for the clay-dust system body sintered with $Al_2O_3$ became homogeneous and the overall size of pores decreased. Adding $Al_2O_3$ to clay-dust system body increased the mechanical properties and the temperature of maximum strength increased as much as $50^{\circ}C$, and the apparent density increased and the absorption decreased. The mullite ($3Al_2O_3{\cdot}2SiO_2$) was produced during sintering process by reaction of $Al_2O_3$ and $SiO_2$ which could participate to liquid-producing-process and the viscosity of melts increased which was proved by measuring a critical viscosity temperature (Tcv) therefore, the refractoriness of specimens were improved to lower the fraction defective.