• 대한치과교정학회지
• /
• 제54권6호
• /
• pp.346-358
• /
• 2024

Objective: Miniscrew-assisted maxillary expansion devices are frequently used for patients with calcified midpalatal sutures. This study aimed to evaluate the effects of two bone-borne maxillary expansion appliances on the cranial and circummaxillary sutures by comparing cone-beam computed tomography (CBCT) images before and after transverse maxillary expansion. Methods: A total of 81 patients (women = 58, men = 23) were treated with either a C-expander (n = 44) or an ATOZ expander (n = 37). CBCT images were obtained before (T0) and after (T1) maxillary expansion, and the widths of 10 circummaxillary sutures were measured in the sagittal, coronal, and axial planes. The Wilcoxon signed-rank test was used to compare the changes in suture width between the C-expander and ATOZ groups, and statistical significance was set at P < 0.05. Results: The frontonasal, frontomaxillary, pterygomaxillary, nasomaxillary, internasal, intermaxillary, and midpalatal suture widths increased significantly after maxillary expansion in both the ATOZ and C-expander groups (both P < 0.05). The frontozygomatic, zygomaticomaxillary, and temporozygomatic suture widths decreased in the C-expander group (P < 0.05), whereas the frontozygomatic suture width increased significantly in the ATOZ group (P < 0.05). The width changes of the frontozygomatic, zygomaticomaxillary, temporozygomatic, pterygomaxillary, internasal, intermaxillary, and midpalatal sutures differed significantly between the two groups (P < 0.05). Conclusions: Both the C- and ATOZ expanders affected the suture width in the naso-maxillozygomatic region. The C-expander decreased the circum-zygomatic suture widths, whereas the ATOZ expander widened the frontozygomatic suture with no effect on other circummaxillary sutures.

• 에너지공학
• /
• 제23권4호
• /
• pp.230-235
• /
• 2014

본 연구에서는 프로토 타입 베인 팽창기가 적용된 초소형 유기 랭킨사이클을 구성하고, 팽창기 전단 온도가 약 $110^{\circ}C$이고, 냉매유량을 일정하게 유지한 조건에서 베인 팽창기 회전수를 변화시키면서, 팽창기 출력, 효율 및 팽창기 전후단 압력, 온도 등을 측정하였다. 베인 팽창기 성능 측정 결과 팽창기 회전수가 증가됨에 따라 팽창기 출력 및 효율이 증가하였다. 팽창기 전효율은 500 rpm 회전수 조건에서 6~7%이고, 1000 rpm 에서는 11~12%임을 보였다. 팽창기 전효율이 낮은 원인은 팽창기 체적효율이 낮기 때문인 것으로 분석되었으며, 향후 체적효율을 향상시키기 위해 팽창기 누설을 개선하기 위한 연구가 진행될 예정이다.

• 동력기계공학회지
• /
• 제20권2호
• /
• pp.17-25
• /
• 2016

In this paper, the feasibility study on a gerotor type expander as a power converting device in a small scale power generation ORC system was made by performance analysis of the gerotor expander. Design of a 1kW-class gerotor expander was carried out and its performance was numerically simulated. For a R134a Rankine system with about 20 kW solar heat source, the gerotor expander efficiency was calculated to be 35~75% for the operating conditions of $Te=80{\sim}100^{\circ}C$ and $Tc=30{\sim}60^{\circ}C$. Maximum expander efficiency was obtained at an expansion ratio somewhat higher than the design expansion ratio due to pre-expansion during suction process inside the outer and inner rotor mate. If the operating expansion ratio is not far from the design expansion ratio, the gerotor expander performance can be well compared to that of a scroll type.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.237-242
• /
• 2009

A steam Rankine cycle was considered to recover waste heat from the exhaust gas of an automobile. Conceptual design of a swash plate type expander was practiced to convert steam heat to shaft power. With the steam pressure and temperature of 35 bar and $300^{\circ}C$ at the expander inlet, respectively, the expander was estimated to produce the shaft power output of about 1.93 kW from the exhaust gas waste heat of 20 kW. The expander output increased linearly accordingly to the amount of exhaust gas waste heat in the range of from 10-40 kW, and the Rankine cycle efficiency was more or less constant at about 9.6% regardless of the waste heat amount.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.422-427
• /
• 2009

Purpose: Breast cancer is second most common cancer in women. Almost of patients with breast cancer treated with mastectomy undergoes breast reconstruction. Nipple reconstruction is an important step in breast reconstruction. Many surgeons have investigated of nipple reconstruction using the flap technique after breast reconstruction with the autologous tissue. The objective of this study is to evaluate the results of nipple reconstruction using the C - V flap technique after breast reconstruction with the only breast expander. Methods: From April 2006 to May 2008, the authors treated 17 patients of nipple reconstruction using C - V flap technique, who were received breast reconstruction with the only breast expander. We have predicted decrease of the size of reconstructed nipple and designed flap a little larger than wanted nipple size. Nipple splint was applied for 4 - 6 months for minimizing decrease of the size of reconstructed nipple. The diameter and height of the reconstructed nipple were measured and patient's satisfaction score was assessed. Results: Mean follow-up duration was 12.5 months. Among the 17 patients, the average absorption rate by height of nipple was 47.0%. Partial necrosis was noted in 1 case, and treated well with conservative management. There was no other significant complications noted. Patient's satisfactory score was assessed by the height, design and location of the nipple. The average of satisfaction score was 85%, 68%, 62% and total average was 83%. Conclusion: The authors experienced 17 patients of nipple reconstruction using the C - V flap technique after breast reconstruction with the only breast expander. The absorption rate of the size of the nipple, complications and patient's satisfactory score of this study were similar to those of nipple reconstruction after breast reconstruction with the autologous tissue. It is expected that nipple reconstruction after breast reconstruction with the only breast expander is safe and reliable. It is considered that a long - term study is necessary.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.397-403
• /
• 2007

In this paper, conceptual design of scroll expander-compressor for Stirling engine utilizing solar energy as heat source has been carried out. Orbiting scroll member was designed to have a double-sided structure to reduce the overall scroll size and to cancel out the axial forces on the orbiting scroll base plate. Diameter of designed scroll base plate was about 251 mm for the expander, and it was about 218 mm for the compressor. With operating condition such as temperature range of $400^{\circ}C/20^{\circ}C$, pressure range of 6 MPa/2 MPa, and shaft speed of 2700 rpm, the shaft output of the designed scroll expander was calculated to be 49.8 kW, while input power for the scroll compressor was 38.6 kW, yielding 11.2 kW for the output power of the Stirling engine. Overall efficiencies of the scroll expander and compressor were 93.73% and 92.87%, respectively.

• 설비공학논문집
• /
• 제23권5호
• /
• pp.313-320
• /
• 2011

For a steam Rankine cycle to recover waste heat from the exhaust gas of an Internal combustion engine, a swash plate type of expander as a power conversion unit has been designed. Numerical simulation has been carried out to estimate the performance of the designed expander. With the steam pressure and temperature of 35 bar and $300^{\circ}C$ at the expander inlet, respectively, the expander was estimated to produce the shaft power output of about 2.67 kW from the exhaust gas waste heat of 25.2 kW. The expander output increased almost linearly with the amount of exhaust gas waste heat in the range of from 5~40 kW, and the expander and Rankine cycle efficiencies showed gradual decreases in the ranges of 72.2%~69.5% and 10.8%~10.4%, respectively.

• 동력기계공학회지
• /
• 제16권4호
• /
• pp.30-36
• /
• 2012

A scroll expander has been designed to produce a shaft power from a R134a Rankine cycle for electricity generation. Heat was supplied to the Rankine cycle through a heat exchanger, which received heat from another cycle of water. In the water cycle, water was heated up in a boiler using biogenic solid fuel. The designed scroll expander was a horizontal type, and a trochoidal oil pump was employed for oil supply to bearings and Oldham-ring keys. For axial compliance, a back pressure chamber was created on the backside of the orbiting scroll base plate. Numerical study has been carried out to estimate the performance of the designed scroll expander. The expander was estimated to produce the shaft power of about 2.9 kW from a heat supply of 36 kW, when the temperature of R134a was $80^{\circ}C$ and $35^{\circ}C$ at the evaporator and condenser of the Rankine cycle, respectively. The expander efficiency was about 70.5%. When the amount of heat supply varied in the ranges of 7.5~55 kW, the expander efficiency changed in the range of 45.6~70.5%, showing a peak efficiency of 70.5% at the design shaft speed.

• 한국가스학회지
• /
• 제19권4호
• /
• pp.41-48
• /
• 2015

스크롤 팽창기의 성능특성은 유기랭킨사이클 (ORC) 시스템의 성능에 가장 중요한 변수이다. 본 연구에서는 1kW급 ORC 시스템을 구성하여 다양한 작동 조건에서 스크롤 팽창기의 성능특성을 파악하였다. ORC 시스템은 증발기, 스크롤 팽창기, 응축기, 작동유체펌프로 구성되어 있으며, 작동유체로 R245fa를 사용하였다. 고온수 온도는 50kW급 전기히터에 의해 $80^{\circ}C$에서 $115^{\circ}C$까지 제어되었다. 스크롤 팽창기의 최대 등엔트로피 효율은 77%로 측정되었고, ORC 시스템의 축동력은 열원의 온도 조건 및 팽창기의 회전속도에 따라 0.5kW에서 1.8kW까지 측정되었다.

• 설비공학논문집
• /
• 제26권4호
• /
• pp.151-157
• /
• 2014

An algebraic scroll expander has been fabricated and tested in a R134a Rankine cycle with heat source of 20 kW. For the operating conditions of 20~26 bar and $90{\sim}93^{\circ}C$ at the expander inlet and 8~9 bar at the outlet, the expander produced the shaft output power of about 0.6~0.7 kW in the operating speed range of 1500~2000 rpm. These correspond to the expander efficiency of 40~45%. The volumetric efficiency increased with increasing of the expander speed, reaching to 80% at 2000 rpm. Comparing to numerical simulation results, mechanical efficiency from the test data was found to be considerably low by as much as 30%, indicating that reduction in the frictional loss should be made to improve the scroll expander efficiency.