DOI QR코드

DOI QR Code

Design and performance analysis of a gerotor expander for power generation from waste heat

폐열회수 발전을 위한 지로터 팽창기 설계 및 성능해석

  • Park, Keun-Tae (Department of Mechanical Engineering, Incheon National University) ;
  • Kim, Yong-Hee (Department of Mechanical Engineering, Incheon National University) ;
  • Kim, Hyun-Jin (Department of Mechanical Engineering, Incheon National University)
  • Received : 2015.12.15
  • Accepted : 2016.03.21
  • Published : 2016.04.30

Abstract

In this paper, the feasibility study on a gerotor type expander as a power converting device in a small scale power generation ORC system was made by performance analysis of the gerotor expander. Design of a 1kW-class gerotor expander was carried out and its performance was numerically simulated. For a R134a Rankine system with about 20 kW solar heat source, the gerotor expander efficiency was calculated to be 35~75% for the operating conditions of $Te=80{\sim}100^{\circ}C$ and $Tc=30{\sim}60^{\circ}C$. Maximum expander efficiency was obtained at an expansion ratio somewhat higher than the design expansion ratio due to pre-expansion during suction process inside the outer and inner rotor mate. If the operating expansion ratio is not far from the design expansion ratio, the gerotor expander performance can be well compared to that of a scroll type.

Keywords

References

  1. J. A. Mathias, J. R. Johnston, J. Cao, D. K. Priedeman and R. N. Christensen, 2009, "Experimental Testing of Gerotor and Scroll Expanders Used in, and Energetic and Exergetic Modeling of, an Organic Rankine Cycle", Journal of Energy Resources Technology, Vol. 131, No. 1, pp. 012201-1-9. https://doi.org/10.1115/1.3066345
  2. O. Badr, 1984, "Multi-vane expanders, as prime movers for low-grade energy organic Rankine-cycle engines Applied Energy", Vol. 16, No.2, pp. 129-146. https://doi.org/10.1016/0306-2619(84)90060-6
  3. R. B. Peterson, H. Wang and T. Herron, "Performance of a small-scale regenerative Rankine Power cycle employing a scroll expander", 2008, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 222, No. 3, pp. 271-282.
  4. Kane. M, Larrain. D, Favrat. D, and Allani, Y, 2003, Small hybrid solar power system, Energy, Vol. 28 No. 3, pp. 1427-1443. https://doi.org/10.1016/S0360-5442(03)00127-0
  5. H. J. Kim, J. H. Moon, J. S. Yu and Y. S. Lee, 2013, "Performance analysis of an organic Rankine cycle for waste heat recovery of a passenger car", Journal of the Korean Society for Power System Engineering, Vol. 17, No.2, pp. 87-94 https://doi.org/10.9726/kspse.2013.17.2.087
  6. S. C. Lee and N. Lee, "Design and Analysis of Gerotor for Hydraulic Motors," Journal of KSTLE, 1995
  7. S. C. Lee and N. Lee, 2006, "Profile Design of the Inner Rotor of a Gerotor by the composite Curve of Circular Arcs", Journal of KSTLE, April.
  8. R. Maiti, G. L. Sinha and Kharagpur, 1990, "Limits on modification of epitrochoid used in rotary piston machines and the effect of modification on geometric volume displacement end ripple", Ingenieur-Archiv.
  9. T. Oku, K. Anami, K. Ishii, C. W. Knisely, K. Yasuda, K. Sawai, K. Sano and T. Morimoto, 2005, "Gas leakage in CO2 and R22 scroll compressor and its use in simulations of opimal performance", International conference on compressors and their systems.
  10. H. J. Kim, J. H. Moon and Y. H. Kim, 2015, "Design and testing of an algebraic scroll expander for power generation from a waste heat recovery system", Journal of POWER AND ENERGY, Vol. 299, No. 8, pp. 1019-1031.

Cited by

  1. Modern Small and Microcogeneration Systems-A Review vol.14, pp.3, 2021, https://doi.org/10.3390/en14030785