• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.456-459
• /
• 2005

Continuous cooling transformation behaviors were studied fur low carbon HSLA steels containing three different level $(1\~3\;wt\%)$ of Ni addition. Thermo-mechanical processing (TMP) simulations to construct continuous cooling (CCT) diagram were conducted by using Gleeble system. As cooling rate increased, pearlite, granular bainite, acicular ferrite, bainitic ferrite and lath martensite were transformed from deformed austenite. Fully bainitic microstructure were developed at all cooling rate condition in high Ni containing steel due to hardenability increasing effects of Ni. Ni also influenced the transformation kinetics. At the slowest cooling rate of $0.3^{\circ}C/s$, transformation delayed with decreasing Ni contents because of the diffusion of substitutional alloy elements. However, cooling rate slightly increased to $1^{\circ}C/s$, transformation kinetics accelerated with decreasing Ni contents because nucleation of bainite was sluggish due to hardening of residual austenite.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1629-1636
• /
• 2004

The continuous casting is primarily a heat-extraction process in which the heat transfer at various cooling zones profoundly influences quality of products. So development of numerical model is necessarily needed for more specific and clear investigations upon heat transfer mechanism at mold and secondary cooling zones. In this study, heat transfer coefficients which show the characteristic of heat transfer mechanism in mold are calculated for more exact analysis with temperature measured in bloom mold using optimal algorithm, and finally the validity of cooling conditions at secondary cooling zone actually used at field fur 30 Ton bloom type continuous casting of 0.187%C is investigated. From the results of solidification analysis, the characteristic of bloom mold shows a similar tendency with that of previous studies, and optimized cooling conditions for 0.187%C are presented.

• Composites Research
• /
• 제23권3호
• /
• pp.43-49
• /
• 2010

제주도 표선리 현무암 원광을 이용하여 연속 방사에 의해 현무암 섬유를 제조하였다. 먼저 현무암의 용융특성을 확인하기 위하여 현무암 원광을 백금도가니에 넣고 $1550^{\circ}C$로 용융시킨 후, 물속에서 급냉하였다. 냉각한 후 X-선 회절, 열팽창, 고온 점도, 고온 전기전도도와 고온 현미경을 측정 분석하여 연속방사 조건을 조사하였다. 연속 섬유를 제조하기 위한 최적의 방사 온도와 고온 점도는 각각 $1264^{\circ}C$와 $10^{2.8}$ poise이었다. 제조된 방사 섬유의 특성은 인장강도, 전자현미경 관찰, 내열시험 등으로 확인하였다. 부싱 온도 $1240^{\circ}C$와 와인더 속도 4600rpm의 방사 조건에서 제조된 섬유의 인장 강도는 3660MPa을 나타내었다.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.10-16
• /
• 2015

In this study, we suggest a method to predict probability distribution of a new customer's degree of loyalty using C-CRF that reflects the RFM score and similarity to the neighbors of the customer. An RFM score prediction model is introduced to construct the first feature function of C-CRF. Integrating demographical similarity, purchasing characteristic similarity and purchase history similarity, we make a unified similarity variable to configure the second feature function of C-CRF. Then parameters of each feature function are estimated and we train our C-CRF model by training data set and suggest a probabilistic distribution to estimate a new customer's degree of loyalty. An example is provided to illustrate our model.

• 대한수학회보
• /
• 제50권1호
• /
• pp.161-173
• /
• 2013

This paper is concerned with the space $\mathcal{K}_{w^*}(X^*,Y)$ of $weak^*$ to weak continuous compact operators from the dual space $X^*$ of a Banach space X to a Banach space Y. We show that if $X^*$ or $Y^*$ has the Radon-Nikod$\acute{y}$m property, $\mathcal{C}$ is a convex subset of $\mathcal{K}_{w^*}(X^*,Y)$ with $0{\in}\mathcal{C}$ and T is a bounded linear operator from $X^*$ into Y, then $T{\in}\bar{\mathcal{C}}^{{\tau}_{\mathcal{c}}}$ if and only if $T{\in}\bar{\{S{\in}\mathcal{C}:{\parallel}S{\parallel}{\leq}{\parallel}T{\parallel}\}}^{{\tau}_{\mathcal{c}}}$, where ${\tau}_{\mathcal{c}}$ is the topology of uniform convergence on each compact subset of X, moreover, if $T{\in}\mathcal{K}_{w^*}(X^*, Y)$, here $\mathcal{C}$ need not to contain 0, then $T{\in}\bar{\mathcal{C}}^{{\tau}_{\mathcal{c}}}$ if and only if $T{\in}\bar{\mathcal{C}}$ in the topology of the operator norm. Some properties of $\mathcal{K}_{w^*}(X^*,Y)$ are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.445-450
• /
• 1998

In the present paper the effects of combined heat and mass transfer on the fin efficiency were calculated. Sector method was used for calculating the fin efficiency of the continuous fin. The parameter Lewis No. and C which describe the combined heat and mass transfer is derived by using the heat and mass transfer analogy and effects of Lewis No. and C on the fin efficiencies were calculated.

• 아태비즈니스연구
• /
• 제12권3호
• /
• pp.235-250
• /
• 2021

Purpose - This study analyzed the correlation and influence between social support, trust (seller, brand), and continuous purchase intention in C2C social commerce in China. Design/methodology/approach - To test the hypothesis, SPSS and Smart PLS 3.0 statistical packages were used based on the collected data. Findings - First, it was confirmed that social support (emotional support, informational support) had a positive effect on trust in sellers. Second, it was found that trust in sellers had a positive effect on brand trust. Third, both seller trust and brand trust have a positive effect on consumers' continuous purchase intention. Research implications or Originality - When consumers gain emotional and informational support from sellers, trust in sellers will be effectively improved. Companies wishing to improve brand credibility of their products will have to outsource the sale of their products to trusted sellers. The C2C social commerce platform should build its own trust rating system, recommend sellers with high reliability ratings, and encourage sellers to provide consumers with a lot of information about their brand.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1484-1493
• /
• 2004

In this study, it induced to a conclusion below by experiment consideration to regarding an effective supercooling ends method of the flow cooling water in a tube of continuous ice making method and the static cooling water in a tube of continuous ice making method which used magneticfluid in a dynamic type ice storage system. Continuous ice making in a tube of the flow cooling water was shortened about 12 minutes until supercooling ends that case which gave vertical eccentricity rotation magnetic field 120rpm than did not provide magnetic field by experimental result that was tested to supercooling ends effect from shape control of magneticfluid. Continuous ice making method in a tube of the static cooling water compared with and reviewed the case that was not provided with the magnetic field and exposed cooling surface instantaneously by magnetic field. It confirmed that supercooling degree $\Delta$ $T_{c}$, $\Delta$ $T_{s}$, and $\Delta$ $T_{w}$ became lower because of heat transfering increasing by the occurrence of natural convection between after cooling starting progress time 1∼3 minutes if it did not give a magnetic field, and peformed the supercooling ends when natural convection occurred confirmed that refrigerating capacity was better. That relation $\Delta$ $T_{c}$, and $t_{e}$/($\Delta$ $T_{c}$-$\Delta$ $T_{s}$) after convection occurred, was not depended on $T_{b}$ and initial temperature if the depth of water and thickness of magneticfluid were regular and it was possible to verify conjecture of tp from $\Delta$ $T_{s}$ and $\Delta$ $T_{c}$.lar and it was possible to verify conjecture of tp from $\Delta$ $T_{s}$ and $\Delta$ $T_{c}$.c}$.>.

• Journal of Biosystems Engineering
• /
• 제22권3호
• /
• pp.279-288
• /
• 1997

This study was worked out to obtain fundamental data needed for developing a continuous type dryer. The drying process in a cross-flow type continuous dryer was expressed as partial differential equations, and a drying simulation model for predicting rice moisture content, rice temperature, drying air absolute humidity, drying air temperature was developed by using the finite difference method. To validate the performance of the drying simulation model, a prototype continuous dryer was constructed in this study. The size of the test dryer was one-tenth to that of a commercial continuous dryer. The difference in the outlet rice moisture content between the predicted values and the measured values was within 0.5%, that of outlet rice temperature was below $3^{\circ}C$, that of drying air temperature in drying bed was within $8^{\circ}C$ and that of relative humidity of outlet drying air was big because of the different measuring point. In addition, a drying simulation model for a actual size continuous dryer with double flow was developed in this study. This drying simulation model included the rice mixing effect in the middle of drying length. The difference of outlet moisture content between the predicted and the measured values showed below 0.5% in this study.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.454-458
• /
• 1996

The computer simulated CVD phase diagrams were completed by the stoichiometric algorithm. Three kinds of SiC/C FGMs: stepwise, semi-continuous, and continuous specimens were prepared according to the simulation. These three types of FGMs and SiC non-FGMs were compared through various thermal test and measurement. In overall judgment, the semi-continuously deposited FGM specimens out of three kinds showed excellent thermal properties as well as a good adhesion to each sub-layer.