• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.110-115
• /
• 2012

For domestic aircraft industry, not mass production of components is limited, small production scale of the order is made by part because many kinds of hundreds of thousands of kinds of small quantity batch production system are taking. But the high reliability and stability are required during the processing because they require high precision parts are required. It is found that when C-axis rotation speed was increased, the diameter of the cutting tool decreased with increasing surface roughness, while the turn-mail feed rate was increased with increasing the surface roughness.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.605-613
• /
• 2023

The multi-axis combined machining technology has enabled combined machining, which was difficult. However, the reality is that manufacturing costs are rising due to expensive equipment and there is a shortage of machine operation engineers. The purpose of this research is to present the optimum cutting conditions for the surface roughness when processing the inner diameter of SUS440C, which is an egg material, using a CNC automatic lathe. As a result of measuring the surface roughness, dry machining was the best at R_a0.481㎛ at a spindle speed of 4,000rpm, a feed rate of 0.05rev/min, and a cutting depth of 0.3mm. In wet machining, the highest value was R_a0.317 at a spindle speed of 2,000 rpm, a feed rate of 0.05 rev/min, and a cutting depth of 0.2 mm. The lower the feed rate, the better surface roughness appears. It was found that the feed rate had more influence than the number of revolutions and depth of cut.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.406-409
• /
• 1997

An economical 4-axis CNC controller employing step motors is designed and implemented in this paper. By using the inherent ability of holding position of the motor, the CNC controller uses open-loop control for removing trajectory error and for a simple hardware. Each drive of axis has an 8-bit microprocessor 89C52 and a PC controls the axes and pendant by means of RS232C serial communication. Backlash is also compensated at the axis controller. While compensating the backlash, the feed rate becomes zero in order to minimize trajectory error. The trajectories of 16ms interval are computed on PC and are sent to motor drives. In the drives, the trajectories are linearly interpolated for 2ms interval. The developed CNC does not require add-on specific motion card on PC. From the experimental results, the validity of the CNC controller based on step motor is proved.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.62-68
• /
• 2017

Since the aircraft parts industry is a high-value-added industry, mass production order production, and the hundreds of thousands. Therefore, parts produced However, since these parts require high reliability and stability, a high degree of precision is required. In Korea, there on the roughness of the machined surface in cutting process. However, research on the surface roughness characteristic obtained by which is widely used for aircraft parts is still insufficient in Korea. The purpose of this study is to investigate the effect of turning tool rotation speed and X axis feed rate on the surface roughness of cutting tools in CNC lathes during cutting of aluminum alloy 7075.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1529-1535
• /
• 2000

The aim of the present study was to determine whether brain corticotropin-releasing factor (CRF) and a new peptide, urocortin (UCN) have a direct action in brain mechanisms controlling feed, water and salt intake in sheep. We gave a continuous intracerebroventricular (ICV) infusion of the peptide at a small dose of $5{\mu}g/0.2ml/hr$ for 98.5 hrs from day 1 to day 5 in sheep not exposed to stress. Feed and water intake during ICV infusion of CRF or UCN decreased significantly compared to those during artificial cerebrospinal fluid (CSF) infusion. NaCl intake during infusion of CRF or UCN was the same as that during CSF infusion. Mean carotid arterial blood pressure (MAP) and heart rate during ICV infusion of CRF or UCN were not significantly different from that during CSF infusion. On the other hand, the plasma glucose concentration during ICV infusion of CRF or UCN tended to be higher than that during CSF infusion. These observations indicate that decreased feed intake induced by CRF and UCN infusion is not mediated by the activation of both the pituitary-adrenal axis and the sympathetic nervous system. The results suggested that brain CRF and UCN act directly in brain mechanisms controlling ingestive behavior to decrease feed and water intake, but do not alter salt intake in sheep.

• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.318-331
• /
• 1995

Hologen lamp를 열원으로 한 적외선 집중가열 방식의 Floating zone법을 이용하여 조화융해조성(48.6 mol% $Li_2O : 51.4 mol% LiNbO_3$)의 $LiNbO_3$ 단결정과 여기에 5 mol%의 MgO를 첨가한 $LiNbO_3$:5mod%MgO 단결정을 c-축으로 성장시켰다. 고품질의 광학용 $LiNbO_3$ 결정을 성장시키기 위해 원료봉의 최적 소결조건 및 성장 분위이게 따른 원료봉/융액 계면에 대한 고찰을 하였고, 이를 바탕으로 하여 ga s flow rate, pulling rate, 원료봉과 종자정의 회전속도 등에 대한 최적의 결정성장 조건을 확립하였다. 성장된 결정에 대해서 chemical etching을 통한 etch pattern과 ICP(Inductively Coupled Plasma) 분석을 통한 조성 변동 및 불순물 Fe 함량을 조사하였고, 5 mol% MgO의 첨가에 따른 투과율과 굴절율의 변화를 관찰하였다. 또한 $LiNbO_3$의 비선형 광학특성에 대해서는 측정한 굴절율 값을 data로 하여 비선형 광학 굴절율 $n_2$를 계산하여 다른 광학물질과 비교하였고, 이와 관련하여 비선형 광학특성에 대한 전반적인 고찰을 하였다.

• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.57-62
• /
• 1994

FZ법을 이용하여 $YbFeCoO_4$ 단결정을 성장하였다. 결정 성장은 공기분위기 중에서 이루어졌으며, 성장 속도는 1~2mm/hr로 조절하였으며, 성장 초기는 $YbReO_3$와 CoO로 분해 되었으나 용융 후 액상의 조성이 변화됨에 따라 $YbFeCoO_4$ 단일사의 단결정이 육성되었다.결정의 성장 방향은 c축에 수직으로 성장하였으며 다결정의 종자 결정을 이용하여 용이성장축으로 성장된 결정의 성장 방향은[110]방향이었다.