• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.9
• /
• pp.6-13
• /
• 1993

In is well-known that system performance in the high speed digital radio communication system is usually deteriorted due to the frequency selective fading distortion. In this paper, bit error rate(BER) performance by the reception phase error in cellular mobile communication systems is derived and analyzed. The system is modeled as a frequency selective fast Rayleigh fading channel corrupted by additive white gaussian noise(AWGN) and co-channel interference(CCI). Our numerical results show that for the 24KBaud(48Kb/s) $\pi$/4-DQPSK operated at carrier frequency 800 MHz and C/I<20 dB, the BER will be dominated by CCI if the vehicular speed is below 100 Km/h. The results show that performance, when reception phase error is below $\pi$/12, is deterioreted less than 3 dB, and that performance, when reception phase error is above $\pi$/12, is degraded over 3 dB.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2345-2348
• /
• 1999

Existing $\psi$-AEA-t (phase-AEA-time) characteristic in polymer materials for power cable is good in general deterioration characteristic according to time variation, but it is difficult to clearly distinguish from deterioration state and diagnosis of deterioration is not enough to some extent. This paper is interpreted AE discharge statistics quantities measuring phase-amplitude variation of acoustic emission characteristic obtained from treeing breakdown experiment. Besides it can know useful discharge statistics quantities (AE average inception phase/amplitude, AE average maximum phase/amplitude) about so many for diagnosis of treeing deterioration.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.53-59
• /
• 2014

The corrosion resistance of submerged entry nozzle (SEN) materials were investigated for high-class steel manufacturing. Composite samples were fabricated by mixing $ZrO_2$, $Al_2O_3$, MgO, mullite, spinel, and carbon. The raw materials were mixed with attrition milling, compacted in a uniaxial pressure of 200MPa and calcined at $1000^{\circ}C$ for 3 h in $N_2$ atmosphere. The bulk density and apparent porosity of the calcined samples were measured by the liquid displacement method in water using Archimedes's principle. The corrosion resistance of the samples were measured by cup test with mold powder at $1550^{\circ}C$ for 2 h. The microstructure and elemental analysis of samples were observed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction pattern (XRD). The XRD result shows that the starting raw materials were crystalline phase. The microstructure of fabricated specimen was investigated before and after corrosion tests at $1000^{\circ}C$ and $1550^{\circ}C$ for 2h. $ZrO_2$-C composite showed good resistance in the slag corrosion test. Among the composite oxide materials, $ZrO_2-Al_2O_3$-C and $ZrO_2$-MgO-C showed better resistance than $ZrO_2$-C in the slag corrosion test. The diameter variation index of $ZrO_2$-C refractory was 16.1 at $1000^{\circ}C$ for 2 h. The diameter variation index of the $ZrO_2-Al_2O_3$-C refractory was larger than that of the $ZrO_2$-C refractory at $1550^{\circ}C$ for 2 h.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.191-199
• /
• 1994

Protoplasts of both strains were produced by lysozyme digestion at $30^{\circ}C$ for 180min. Both strains were treated with $40{\mu}g$/ml of lysozyme in 30mM Tris-HCl buffer(pH 7.5) containing 10% sucrose at the late logarithmic growth phase. It was found that the efficiency of protoplast formation was high at $30^{\circ}C$ and pH 7.5 by measuring the decrease in absorbance. Optimum concentrations of sucrose $Ca^{2+}, \;Mg^{2+}$ for protoplast formation were determined to be 15%, 20mM and 6mM, respectively. Hydrolysis of cell wall and protoplast formation efficiency for L. plantarum showed better results than those for Leu. mesenteroides. The resistances to antibiotics erythromycin and chloramphenicols were chosen as the selection marker for the fusant between L. plantarum and Leu. mesenteroides. Production phase of protoplast in Leu. mesenteroides was also compared with L. plantarum in this paper.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.452-457
• /
• 1999

Algicidal bacteria were isolated from the mud of south coastal sea of Korean peninsula and screened to evaluate algicidal activity on Cochlodinium polykrikoides. The optimum condition for the development of highest algicidal activity was determined, The optimum sodium chloride concentration for algicidal activity of isolated algicidal bacteria was $3\%$. The optimum temperature, pH and culture time for the highest algicidal activity were $30^{\circ}C$, pH 7 and above 24 hr, respectively. The algicidal activity were significantly increased at the stationary phase of the cell growth and continuously increased up to maximum at the death phase, probably due to the release of algicidal substance by cell Iysis. The effect of zinc ion addition on algicidal activity, was observed and indicated that the substance requires zinc for its activity. The candidate for the algicidal substance may be $\alpha$-mannosidase.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.408-414
• /
• 1988

This thesis is 2nd thesis from "Mechanism of Intercalation Compounds in Graphite with Hydrogen sulfate(J. Korea Cer. Soc. Vol. 22. No.6, 1985). We have oxidized natural Graphite flakes(0.1~0.2mm., Kropfm hl passau in Deutchland. S40) with a solution of CrO3 in H2SO4. Whilst persulfate ions were intercalated, too, below 7$^{\circ}C$, no evidence for intercalation of a peroxo compound was found at 22$^{\circ}C$. The reaction was interrupted after various times by filtering and washing with concentrated H2SO4. X-ray diffraction showed that the 2nd stage compound had already been formed after 2 minutes. We could only follow further oxidation to the blue stage compound which was completed after 35 minutes. We have found six distinct intermediate stage between 2nd stage and 1 stage. Experiments are described on the formation of intermediate stage color and X-ray diffraction analysis.ysis.

• Membrane and Water Treatment
• /
• v.13 no.6
• /
• pp.291-301
• /
• 2022

In this study, cement/PVDF hollow-fiber hybrid membranes were prepared via a mixed process of diffusion-induced phase separation and hydration. The presence of X-ray diffraction peaks of Ca(OH)₂, an AFt phase, an AFm phase, and C-S-H phase confirmed the hydration reaction. Good hydrophilicity was obtained. The cross-sectional and surface morphologies of the hybrid membranes showed that an asymmetric pore structure was formed. Hydration products comprising parallel plates of Ca(OH)₂, fibrous ettringite AFt, and granulated particles AFm were obtained gradually. For the hybrid membranes cured for different time, the pore-size distribution was similar but the porosity decreased because of blocking of the hydration products. In addition, the water flux decreased with hydration time, and carbon retention was 90% after 5 h of rejection treatment. Almost all the Zn²⁺ ions were adsorbed by the hybrid membrane. The above results proved that the obtained membrane could be alternative as basement membrane for separation application.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.55-58
• /
• 1999

Nafion supported catalytic membranes were found to be active, stable and selective in th partial oxidation of propane to oxygenates with H2O2 under mild condition. Addition of Fe2+ in liquid phase enhances the reaction rate. Reaction proceeds according to a radical mechanism based on th electrophilic activation of propane on superacid sites and subsequent reaction of the activated paraffin with OH radicals. The use of a catalytic membrane, which allow separation of the intermediate products from the liquid phase containing the oxidant, was found to be effective to perform selective partial oxidation of propane with high yields to oxygenated products.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.165-171
• /
• 1998

The $Y_1Ba_2Cu_3O_{7-x}$(123) superconductor powders were prepared by pyrophoric synthesis method(PSM) using $Y_2O_3$(99.9%), $BaCO_3$(99.9%), and CuO(99.9%) powders. The phase formation and reaction kinetics of 123 superconductor manufactured with powders prepared in various pHs of pyrophoric synthetic solution have been studied through the experiments at various heat treatment temperatures and times. Inductively coupled plasma(ICP) spectroscopy and scanning electron microscopy(SEM) measurements were performed to examine the composition and morphology of the sample. X-ray diffraction(XRD) analysis was done to determine phase formation and conversion ratio of Y-Ba-Cu-O systems. The 123 powder prepared at pH 7(${\pm}0.3$) yields the best result in terms of purity, homogeneity, and reactivity. The activation energies(${\Delta}E_a$) of 123 phase formation were found to be 191 kJ/mol and 230kJ/mol in solid state reaction method and pyrophoric synthesis method, respectively.

• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.20-25
• /
• 1995

This experiment was attempted to improve ethanol productivity by immobilization of Kluyveromyces marxianus FO43 using Jerusalem artichoke powder. Sucrose medium was used to determine optimum conditions for cell immobilization. The optimum conditions were alginate concentration of 2%, bead size of 2 mm, a particle input ratio of 30 : 100, cultivation period of 24 hours, and substrate concentration of 10%(w/v). The immobilized cells produced the high concentrations of ethanol at pH $4.5{\sim}6.5$ and $30{\sim}45^{\circ}C$, broader ranges of pH and temperatures than those of free cells. Under optimum conditions the immobilized cells showed ethanol concentration of 46.4 g/L and productivity of 1.93 g/L.h. The microphotograph using a two phase contrast microscope showed that immobilized cells cultivated under the optimum conditions were densely populated toward the surface area of beads.