• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.188-190
• /
• 1995

This paper describes a soft switching using discontinuous inductor current. The soft switching snubber circuit provides ZCS and ZVS for main switch. For high power applications, the input ractifier is fed from a three-phase ac source. The Conventional switching method is hard switching technics, because of the device turn off is ocurred in maximum reactor current. In this time, switching losses are maximised by the hard switching. In generally, soft switching technique has been adjusted with the snubber condenser in order to compensates for this losses. So, it was compared hard switching with soft switching which has proposed in this paper for switching losses, distortion factor by the simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.76-79
• /
• 2009

The current understanding for phase/grain boundary sliding and low-temperature/high-strain rate superplasticity of two-phase titanium alloys is summarized. The quantitative analysis on boundary sliding revealed increased sliding resistance on the order of $\alpha/\beta\;\ll\;\alpha/\alpha\;\approx\;\beta/\beta$ boundary, hence, led to the conclusion that approximately 50% alpha(or beta) volume fraction and/or grain refinement is beneficial for obtaining large superplastic elongation at low temperature and/or high strain rate. To predict the temperature for 50% alpha volume in various alpha/beta Ti, artificial neural network was applied. Finally, much enhanced superplasticity was achieved through grain refinement utilizing dynamic globularization.

• 소성∙가공
• /
• 제19권1호
• /
• pp.5-10
• /
• 2010

The current understanding for phase/grain boundary sliding and low-temperature/high-strain rate superplasticity of two-phase titanium alloys is summarized. The quantitative analysis on boundary sliding revealed increased sliding resistance on the order of ${\alpha}/{\beta}\;\ll\;{\alpha}/{\alpha}\;{\approx}\;{\beta}/{\beta}$ boundary, hence, led to the conclusion that approximately 50% alpha(or beta) volume fraction and/or grain refinement is beneficial for obtaining large superplastic elongation at low temperature and/or high strain rate. To predict the temperature for 50% alpha volume in various alpha/beta Ti, artificial neural network was applied. Finally, much enhanced superplasticity was achieved through grain refinement utilizing dynamic globularization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1162-1165
• /
• 2004

Size and crystalline phase changes of $Fe_{2}O_{3}$ nanoparticles formed in a $H_{2}/O_{2}$ flame have been investigated. At flame temperatures below $1350^{\circ}C$, the mean particle size increased monotonously with the distance from the burner edge; but in high-temperature flames above $1650^{\circ}C$, it suddenly decreased from 20 nm to ${\sim}3$ nm with the distance from the burner edge. The results of X-ray diffraction and HRTEM showed that this sudden reduction of the size of nanoparticles was accompanied by a partial phase transformation from ${\gamma}$-$Fe_{2}O_{3}$ into ${\alpha}$-$Fe_{2}O_{3}$. We suggest the structural instability due to ${\gamma}-$ to ${\alpha}-phase$ transformation as a mechanism for a rapid fragmentation of 20 nm particles into 3 nm ones.

• 한국축산식품학회지
• /
• 제32권1호
• /
• pp.62-67
• /
• 2012

This study calculated kinetic parameters of Escherichia coli O157:H7 and developed a probabilistic model to estimate growth probabilities of E. coli O157:H7 on polyethylene cutting boards as a function of temperature and time. The surfaces of polyethylene coupons ($3{\times}5$ cm) were inoculated with E. coli O157:H7 NCCP11142 at 4 Log $CFU/cm^2$. The coupons were stored at 13 to $35^{\circ}C$ for 12 h, and cell counts of E. coli O157:H7 were enumerated on McConkey II with sorbitol agar every 2 h. Kinetic parameters (maximum specific growth rate, Log $CFU/cm^2/h$; lag phase duration, h; lower asymptote, Log $CFU/cm^2$; upper asymptote, Log $CFU/cm^2$) were calculated with the modified Gompertz model. Of 56 combinations (temperature${\times}$time), the combinations that had ${\geq}$0.5 Log $CFU/cm^2$ of bacterial growth were designated with the value of 1, and the combinations that had increases of <0.5 Log $CFU/cm^2$ were given the value 0. These growth response data were fitted to the logistic regression to develop the model predicting probabilities of E. coli O157:H7 growth. Specific growth rate and growth data showed that E. coli O157:H7 cells were grown at $28-35^{\circ}C$, but there were no obvious growth of the pathogen below $25^{\circ}C$. Moreover, the developed probabilistic model showed acceptable performance to calculate growth probability of E. coli O157:H7. Therefore, the results should be useful in determining upper limits of working temperature and time, inhibiting E. coli O157:H7 growth on polyethylene cutting board.

• 한국약용작물학회지
• /
• 제17권6호
• /
• pp.434-438
• /
• 2009

For the development of a new antidementia functional food or alternative drug using agricultural products, Job's tears (Coix lachrymajobi L.), which shows high acetylcholinesterase (AChE) inhibitory activity (55.1%) was selected and the extraction conditions of AChE inhibitor were optimized. AChE inhibitor of Job's tears was maximally extracted when it was treated with 60% methanol at $40^{\circ}C$ for 6 h. The AChE inhibitor of the methanol extracts was partially purified by systematic solvent extraction, thin layer chromatography, silica gel chromatography and reverse-phase HPLC and the partial purified AChE inhibitor with inhibitory activity ($IC_{50}$) of $0.608\;{\mu}g$ was obtained. The partial purified AChE inhibitor was soluble in methanol and hexane, and insoluble in water. Its maximum absorption spectra was 230 nm and also it was stable in the range of $30^{\circ}C$ and $70^{\circ}C$ and pH 4.0-8.0 for 1 h.

• Bulletin of the Korean Chemical Society
• /
• 제11권3호
• /
• pp.209-214
• /
• 1990

A series of compounds consisting of 4'-oxybenzylidene-4-n-butylaniline, a mesogen, and a p-substituted phenoxyterephthaloyl structure a non-mesogen, interconnected through a central hexamethylene spacer were synthesized and their thermal behavior and liquid crystallinity were studied. p-Substituents included in this study are H, Cl, CN, $NO_2,\;n-C_4H_9O$ and phenyl groups. The compounds having phenyl and $n-C_4H_9O$ substituents are enantiotropic and form smectic-A(SA) and nematic (N) phases. The compound with $NO_2$ substituent is monotropic and forms only a nematic phase on heating the solid, whereas it forms nematic as well as $S_A$ phases on cooling the isotropic liquid. The rest compounds were found to be non-liquid crystalline. This is in great contrast to the fact that the monomesogenic model compound 4'-n-hexyloxybenzylidine-4-n-butylaniline forms $S_B,\;S_C,\;S_A$ and N phases enantiotropically.

• 천문학회보
• /
• 제38권2호
• /
• pp.90.2-90.2
• /
• 2013

Filament eruptions are one of the energetic phenomena on the solar surface with flares and coronal mass ejections (CMEs). We observed the whole process of filament eruption that occurred in AR 11305 in association with a C5.6 flare on 2011 September 29th using the Fast Imaging Solar Spectrograph (FISS) and the Solar Dynamics Observatory (SDO). The eruption consists of a slow phase with a transverse speed of ~10 km $s^{-1}$ in 16 minutes and a fast phase with a transverse speed of ~200 km $s^{-1}$ in 3 minutes. Near the beginning of slow phase eruption, preflare brightening occurred beneath the filament in $H{\alpha}$ and some EUV images. The preflare brightening region is associated with a blue-shifted $H{\alpha}$ feature with a speed of ~60 km $s^{-1}$. It appears that this is the outflow from magnetic reconnection which may have occurred at relatively low atmosphere. Our result support the notion that the preflare brightening is a process of magnetic reconnection playing an important role in triggering the filament eruption by deformative the magnetic field lines under the eruptive filament.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.425-428
• /
• 2006

Recently, Direct Methanol Fuel Cell (DMFC) for portable devices has been received much attention because DMFC has a possibility of higher energy density than electrical batteries and smaller size than other fuel cells. This paper presents the fabrication and test of a thermopneumatic microactuator with a phase change for DMFC. A microactuator consists of an inlet an outlet a chamber, a heater and a sensor of resistance temperature detector(RTD). The micoractuator is fabricated by the spin-coating process, the lithograph process, the deep RIE process and so on. The total size of microactuator is $20{\times}20{\times}0.53mm^3$. When the current is applied, the heater heats liquid in chamber. As a result the liquid vaporizes. The response of temperature in the chamber was measured using thermocouple The changed temperature is $3^{\circ}C$ for 5 sec at 0.032W.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.699-704
• /
• 2001

The purpose of this study is to present the atomization characteristics of 2-phase internal mixing nozzle. The obtained results are considered as the essential information of understanding the spray characteristics from the nozzle exit of an aerated nozzle. In this study, SMD and AMD are mainly measured at the distance of Z=10, 20, 50, 80, 120 and 170mm from the nozzle tip. The liquid flow rate was kept at 1.8g/s and the air feeding pressure was changed from 10kpa to 100kpa increasingly. The analysis of the acquired data was performed by 2-D PDPA system and in order to get the realibility, the number of data used in calculating the SMD & AMD were 10,000 samples.