• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.94-98
• /
• 2002

Two kinds of multifilament Bi-2223／Ag tapes, which are different in the precursor calcination temperatures, were heat treated for different time (12, 20, 30, 50, 70, or 100 h) firstly to obtain varied B2223 contents, and then followed by the same pressing and sintering cycles. The relation of the 2223 phase contents after the first sintering and the transport property of the fully processed tapes was studied. The results show that 75-80% 2223 phase formed in tapes before the first cold pressing is beneficial to get a high $I_{c}$ in the final tapes. Compensating the total heat treatment time of the tapes first sintered for 20 h to the same length as that first sintered for 50 h in the subsequent sintering stages, different $I_{c}$ enhancements were observed in these two tapes. No improvement on $I_{c}$ was found in the tape made from the powder calcined at higher temperature, whereas for the tape prepared with the lower temperature calcined powder, the $I_{c}$ was increased to the same level as that first sintered for 50 h. The 2223 contents before the intermediate mechanical work is related to the residual reactants, especially to the liquid phase, which is of vital importance to the phase conversion and healing microcracks, meanwhile, to the size and distribution of the non-superconducting secondary phases. The lower temperature calcined powder resulted in slow formation of 2223 phase, but also provided more reactants and liquid phase for the further phase conversion, as a consequence, for the Improvement of $I_{c}$. c/.

• 분석과학
• /
• 제5권4호
• /
• pp.389-399
• /
• 1992

역상 액체 크로마토그래피에 의하여 $Pd(IEAA-NR)_2$ (R=H, $CH_3$, $C_2H_5$, $n-C_3H_7$, $C_6H_5-CH_2$, $n-C_4H_9$) 킬레이트의 용리 거동을 Micropak MCH-5 분리관을 사용하여 연구하고, 아울러 동시 분리분석에 미치는 흐름속도, 이동상의 세기, 분리관의 온도 등 여러 가지 인자들의 영향을 조사 검토하였다. 용리액으로 methanol/water의 이성분 용매를 사용하였으며, 모든 금속 킬레이트의 용매 세기 인자는 $0{\leq}log\;k^{\prime}{\leq}1$의 범위임을 확인하였고, 각 금속 킬레이트의 log k'과 이성분용매 중의 물의 부피분율을 도시한 결과 직선 관계가 성립하였다. 또한 뱃치법으로 측정한 분포비 ($D_c$)값과 k'값을 도시하여 본 결과 직선관계가 성립됨으로써 금속 킬레이트의 용리 메카니즘이 주로 소용매성 효과, 즉 소수성효과에 기인함을 확인하였다. 또한 금속 킬레이트의 머무름에 미치는 용량 인자와 온도와의 관계를 알아본 결과 좋은 직선성을 나타내고 있으며, 직선의 기울기로부터 엔탈피 (${\Delta}H$)와 엔트로피 (${\Delta}S$)를 구하고, 엔탈피와 용량 인자와의 관계로부터 금속 킬레이트의 머무름이 반드시 엔탈피와 관련되어 있다고 할 수 없으며 구조적 성질과도 관계가 있는 것으로 여겨진다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.87-88
• /
• 2006

The phase transformation behaviors of Ni-Ti shape memory alloys were investigated through a DSC(Differential Scanning Calorimetry). The annealing temperatures were applied from $600^{\circ}C,\;700^{\circ}C,\;800^{\circ}C,\;and\;900^{\circ}C$ for their effects on the phase transformation behaviors. Based on the results of DSC, phase transformation behaviors of shape memory alloys can be predicted by Liang's phase transformation model or Tanaka's phase transformation model.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.

• 전기화학회지
• /
• 제3권1호
• /
• pp.25-30
• /
• 2000

다결정 Pt/0.1 M $H_2SO_4$수성 전해질 계면에서 중간주파수 구간의 위상이동 변화와 Langmuir흡착등온식 사이의 관계를 교류임피던스 방법 즉 위상이동 방법을 이용하여 연구 조사하였다. 제안된 계면등가회로는 전해질저항($R_S$), Faraday저항$(R_F)$, 흡착유사용량$(C_\varphi)$의 등가회로 요소($C_P$)의 직렬접속으로 구성된다 지연되는 위상이동$(\varphi)$은 음전위(E) 및 주파수(f)에 따르며, $\varphi=-tan^{-1}[1/2{\pi}f(R_s+R_F)C_p]$이다. 중간주파수(6Hz)에서 위상이동 변화$(\varphi\;vs.\;E)$는 Langmuir흡착등온식$(\theta\;vs.\;E)$의 결정에 적용할 수 있는 실험적인 방법이다. 다결정 $Pt/0.1\;M\;H_2SO_4$ 전해질 계면에서 수소의 흡착평형 상수(K)와 흡착표준자유에너지$({\Delta}G_{ads})$는 각각 $1.8\times10^{-4}$와 21.4kJ/mol이며 과전위 수소흡착(OPD H)에 기인한다.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.182-192
• /
• 1994

This paper focuses on the investigation of the heat transfer phenomena that occur inside the cylindrical tube. The inclination of the tube is adopted as a principal parameter varying from vertical to horizontal. The phase change material employed in this experiment is 99 percent pure n-docosane paraffin($C_{22}$ $H_{46}$). It is found that the amount of solidified mass during a prescribed solidifying period is not sensitive to the inclination of the tube but to the local layer thickness. It is studied that the latent energy is the largest contributor to the total extracted energy. The sensible energy($E_{s1}$, $E_{s2}$, $E_{s3}$) may not be negligible at the large wall-subcooling and initial-liquid-superheating, also at the first step of solidifying.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.17-20
• /
• 2002

The effects of relatively low lead content (0.2~0.3) on the 2223 phase formation and transport property of Bi-2223/Ag tapes have been investigated. The results show that lead contents have great impact on the phase assemblage of precursors, subsequently, on the phase formation and transport property of silver sheathed BSCCO-2223 tapes. Powders containing Pb=0.25 and Pb=0.3 resulted in the nearly identical $J_c$ values in fully processed tapes, but leaded to significant difference on the phase formation process. For the case of Pb=0.2, both low conversion fraction of 2212 to 2223 and low $J_c$ value were obtained in final reacted tape, which was probably due to lack of enough liquid phase to facilitate the phase transformation.

• 전기화학회지
• /
• 제3권2호
• /
• pp.109-114
• /
• 2000

다결정 $Ir/H_2SO_4$수성 전해질 계면에서 중간주파수 구간의 위상이동 변화와 Langmuir흡착등온식 사이의 관계를 교류임피던스 방법 즉 위상이동 방법을 이용하여 연구 조사하였다. 간소화된 계면 등가회로는 전해질저항(Rs), Faraday저항$(R_F)$, 흡착유사용량$(C_\phi)$ 등가회로 요소$(C_P)$의 직렬접속으로 구성된다. 음전위(E)에 대한 위상이동$(-\phi)$과 표면피복율$(\theta)$ 변화율$[\Delta(-\phi)/{\Delta}E,\;{\Delta}{\theta}/{\Delta}E]$을 비교 및 제시하였다. 지연되는 위상이동$(-\phi)$은 음전위(E) 및 주파수(f)에 따르며, $\phi=tan^{-1}[1/2{\pi}f(R_s+R_F)C_P]$이다. 중간주파수(1 Hz)에서 위상이동 변화$(-\phi\;vs.\;E)$는 Langmuir흡착등온식 $(\theta\;vs.\;E)$의 결정에 적용할 수 있는 실험적인 방법이다. 다결정 Ir/0.1 M $H_2SO_4$ 전해질 계면에서 수소의 흡착평형상수(K)와 흡착표준자유에너지 $({\Delta}G_{ads})$는 각각 $2.0\times10^{-4}$와 21.1kJ/mol이며 과전위 수소흡착(OPD H)에 기인한다.

• 한국동물학회지
• /
• 제37권3호
• /
• pp.318-323
• /
• 1994

The association of replication origins/termini with nuclear matrix during S phase was investigated by DNase digestion of halo structures in synchronized mouse LPI-1 cells. The binding of parental DNA to nuclear matrix was constant throughout S phase. When nuclear matrix was isolated from the cells pulse-labeled with 3H-thvmidine at various stases of S phase, total 3H-labels associated with nuclear matrix were specifically higher at So, Sa and Ss stages than other stases of S phase, suggesting that the newly synthesized DNAs at those stages are not excluded out of nuclear matrix. Similar patterns were obsenred from the pulse-chase experiments, in which cells were pulse-labeled at each stage of S phase and further incubated for 1 hr. These results suggest that the replication origins and termini are fixed at the nuclear matrix, and that the nuclear matrix binding fractions of DNA at 3C-pause may contain a large population of replication origins and termination sites.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.96-100
• /
• 2004

This paper deals with power quality disturbance generator with phase jump function. The proposed generator can be applied to the performance test of custom power devices. Voltage sag, swell, outage, unbalance and phase jump after outage are provided by the generator. The phase jump operating principle of the generator is described and analysed. The control scheme of the disturbance generator is simple and hardware setup is cost effective compared with the conventional scheme. The usefulness of the generator is verified through simulation and experimental results.