• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.242.2-242.2
• /
• 2014

Plasma-polymer thin films (PPTF) have been deposited on a Si(100) wafer and glass under several conditions such as different RF power by using plasma-enhanced chemical vapor deposition (PECVD) system. Ethylcyclohexane, ammonia gas, hydrogen and argon were utilized as organic precursor, doping gas, bubbler gas and carrier gases, respectively. PPTFs were grown up with RF (ratio frequency using 13.56 MHz) powers in the range of 20~60 watt. PPTFs were characterized by FT-IR (Fourier Transform Infrared), FE-SEM (Scanning Electron Microscope), AFM (Atomic Force Microscope), Contact angle and Probe station. The result of FT-IR measurement showed that the PPTFs have high cross-link density nitrogen doping ratio was also changed with a RF power increasing. AFM and FE-SEM also showed that the PPTFs have smooth surface and thickness. Impedance analyzer was utilized for the measurements of C-V curves having different dielectric constant as RF power.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.753-759
• /
• 1996

The artificial construction of well-defined low-dimensional (low-D) quantum structures, such as quantum wire (QWR) still attracts attention of many researchers due to their applications in room-temperature optoelectronic devices. In this work, the migration enhanced epitaxial growth (MEE) and the analysis of InAs/ AlAs QWR are reported. On the vicinal semi-insulating InP substrate of $3^o$ tilted cut from (100) surface towards (010) direction, InAs/ AlAs QWR superlattices have been successfully grown by MEE with the introduction of growth interruption at each shutter operation of MBE cell. The in-situ RHEED analyses show that MEE gives superior step-flow growth (SFG) and sharper interface formation over a conventional MBE growth. We have grown 4 samples in series varying the growth temperature. The QWR samples are analyzed by photoluminescence (PL) and atomic force microscopy (AFM). From the AFM images, we can get the definitely resolved 1-D structures. This structure is believed to be due to the MEE method and its separation is better than any other data from others. We are now studying the dependence of the structure on the growth temperature.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.186-195
• /
• 2002

The mechanism of micro machining of reacted layer on silicon surface were proposed. The depth of reacted layer and the change of mechanical property were measured and analyzed. Depth of hydrated layer which is created on the surface of silicon by potassium hydrate was analyzed with SEM and XPS. The decrease of the micro victors hardness of silicon surface was shown with the increase of the concentration of potassium hydrate and the change of the dynamic friction coefficient by chemical reacted layer was measured due to the readiness of machining. The experiment of groove machining was done with 3-axis machine with constant load. With chemical mechanical micro machining the surface crack and burrs generated by both brittle and ductile micro machining were diminished. And the surface profile and groove depth was shown in accordance with the machining speed and reaction time with SEM and AFM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.173-173
• /
• 2011

반도체 집적도의 비약적인 발전으로 복잡하고 다양한 공정이 연구되었고 공정 중 박막에서 발생되는 물리적, 화학적 반응들에 대한 연구 필요성이 대두 되었다. 박막은 다양한 공정 환경에서 박막의 특성을 잃지 않고 물성을 유지하여야 한다. 특히 공정상의 고온 환경에서 박막은 안정해야하며 물리적손상이 있어서는 안 된다. 이 논문에서는 반도체의 기판으로 사용되는 Si기판과 금속배선 물질인 Cu와의 확산을 효과적으로 방지하기 위한 W-C-N 확산방지막을 제시하였고 시료 증착을 위하여 rf magnetron sputter를 사용하여 동일한 증착조건에서 질소(N)의 비율을 다르게 하여 박막 내 질소비율(0 sccm, 2 sccm)에 따른 확산방지막을 제작하였다. 이후 시료의 열적 안정성 측정을 위하여 상온, 600도, 800도로 각각 질소 분위기에서 30분간 열처리 과정을 실시하여 열적 손상을 인가하였다. 이후 Nanoindentation기법을 이용하여 총 16 point 측정을 하였다. 이를 Weibull distribution으로 분석하여 정량화 시켜 박막의 균일도와 신뢰도를 연구하였다. 또 WET-SPM을 이용하여 AFM 표면 이미지를 확인하였다. 그 결과 고온에서 박막이 Compressive stress를 받아 박막이 일어남을 확인 하였다. 이는 질화물질이 고온에서 물성변화가 적게 나타나는 것을 알 수 있었고, 균일도와 결정성 또한 질화물질에서 더 안정적이었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.329-329
• /
• 2011

We investigated the thin films of poly(3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) prepared by ultrahigh vacuum (UHV) electrospray depositioin (ESD) by using in-situ XPS, UPS and ambient-pressure AFM. The morphology, chemical structures, and interface properties of these materials, most widely used for bulk heterojunction organic solar cells, were studied depending on the ESD solution compositions and concentrations. We found that the solution conductivity and flow rate as well as applied voltage are the important parameters for stable electrospray and film formation. These results suggest that UHV ESD is a viable method for the deposition of multilayers of polymers under UHV condition. We also discuss the energy level alignment for the various deposition conditions at the interface, which is one of the most important operating parameters of the bulk heterojunction organic solar cells.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.160-166
• /
• 2007

Novel multiblock copolymers, based on segmented sulfonated hydrophilic-hydrophobic blocks, were synthesized and investigated for their application as proton exchange membranes. A series of segmented sulfonated poly(arylene ether sulfone)-b-polyimide multiblock copolymers, with various block lengths, were synthesized via the coupling reaction between the terminal amine moieties on the hydrophilic blocks and naphthalene anhydride functionalized hydrophobic blocks. Successful imidization reactions required a mixed solvent system, comprised of NMP and m-cresol, in the presence of catalysts. Proton conductivity measurements revealed that the proton conductivity improved with increasing hydrophilic and hydrophobic block lengths. The morphological structure of the multiblock copolymers was investigated using tapping mode atomic force microscopy (TM-AFM). The AFM images of the copolymers demonstrated well-defined nanophase separated morphologies, with the changes in the block length having a pronounced effect on the phase separated morphologies of the system. The self diffusion coefficient of water, as measured by $^1H$ NMR, provided a better understanding of the transport process. Thus, the block copolymers showed higher values than Nafion, and comparable proton conductivities in liquid water, as well as under partially hydrated conditions at $80^{\circ}C$. The new materials are strong candidates for use in PEM systems.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.118-122
• /
• 2009

Organic thin film transistors with a pentacene active layer and various polymer gate insulators were fabricated and their performances were investigated. Characteristics of pentacene thin film transistors on different polymer substrates were investigated using an atomic force microscope (AFM) and x-ray diffraction (XRD). The pentacene thin films were deposited by thermal evaporation on the gate insulators of various polymers. Hexamethyldisilazane (HMDS), polyvinyl acetate (PVA) and polymethyl methacrylate (PMMA) were fabricated as the gate insulator where a pentacene layer was deposited at 40, 55, 70, 85, 100 oC. Pentacene thin films on PMMA showed the largest grain size and least trap concentration. In addition, pentacene TFTs of top-contact geometry are compared with PMMA and $SiO_2$ as gate insulators, respectively. We also fabricated pentacene TFT with Poly (3, 4-ethylenedioxythiophene)-Polysturene Sulfonate (PEDOT:PSS) electrode by inkjet printing method. The physical and electrical characteristics of each gate insulator were tested and analyzed by AFM and I-V measurement. It was found that the performance of TFT was mainly determined by morphology of pentacene rather than the physical or chemical structure of the polymer gate insulator

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1434-1435
• /
• 2006

본 연구에서는 polymer gate insulators에 따른 pentacene 유기 박막 트랜지스터 (Organic Thin-Film Transistors)의 전기적 특성을 atom force microscope (AFM), x-ray diffraction (XRD) 그리고 I-V 측정을 이용하여 분석하였다. Pentacene 박막 트랜지스터의 전기적 특성은 pentacene의 증착 조건뿐만 아니라 polymer gate insulator에 따라 크게 영향을 받는다. 따라서 다양한 polymer 기판 위에 온도, 두께 그리고 증착 속도에 따라 pentacene을 증착 하였다. 그리고 증착된 pentacne을 AFM, XRD를 이용하여 pentacene의 구조, 결정화 그리고 grain 크기 등을 분석하였다. 또한 inverted stagger며 구조의 pentacene 박막 트랜지스터 소자를 제작하고 I-V 측정하여 그 결과를 분석하였다.

• Journal of Surface Science and Engineering
• /
• v.54 no.1
• /
• pp.18-24
• /
• 2021

KNN is widely used in the electronic industry such as memory devices, sensors, and capacitors due to various structural, electrical, and eco-friendly properties. In this study, Mn-doped KNN was prepared by adopting a sol-gel method with advantages of low cost and large area thin film fabrication. The Mn-doped KNN thin films were deposited by annealing in air for 1 hour and 700℃. The surface morphology characteristics and grain size of the heat-treated KNN were observed by SEM and AFM, and we used the X-ray diffraction for measuring the crystal phase of KNN. The XRD analysis results show that the fabrication of (K0.5Na0.5)(Nb1-xMnn)O3 thin films by sol-gel method in the thin film process of this experiment was stable in the perovskite phase of c-axis orientation. The SEM and AFM results show that the cracks were not confirmed from the fracture surface data of KNN thin films and were densely deposited with thin films with uniform thickness.

• Membrane and Water Treatment
• /
• v.13 no.6
• /
• pp.291-301
• /
• 2022

In this study, cement/PVDF hollow-fiber hybrid membranes were prepared via a mixed process of diffusion-induced phase separation and hydration. The presence of X-ray diffraction peaks of Ca(OH)₂, an AFt phase, an AFm phase, and C-S-H phase confirmed the hydration reaction. Good hydrophilicity was obtained. The cross-sectional and surface morphologies of the hybrid membranes showed that an asymmetric pore structure was formed. Hydration products comprising parallel plates of Ca(OH)₂, fibrous ettringite AFt, and granulated particles AFm were obtained gradually. For the hybrid membranes cured for different time, the pore-size distribution was similar but the porosity decreased because of blocking of the hydration products. In addition, the water flux decreased with hydration time, and carbon retention was 90% after 5 h of rejection treatment. Almost all the Zn²⁺ ions were adsorbed by the hybrid membrane. The above results proved that the obtained membrane could be alternative as basement membrane for separation application.