• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.494-503
• /
• 1995

The selection of salt tolerant rice variety needs an effective method in its testing. Salinity of irrigated water, 0.5% at seedling stage, 0.6% at tillering stage, and 0.9% at panicle formation stage were treated to test salt tolerance of rice using 45 cultivars. At tillering stage, salty water irrigation reduced plant height to 22.6% in early maturing rices(EMR), 30.5% in medium maturing rices(MMR), and 20.9% in medium-late maturing rices(MLMR), and also reduced number of tillers to 11.2% in EMR, 36.2% in MMR, and 36.0% in MLMR compared to rices grown in non-salty water irrigation. At panicle formation stage of rice, salty water irrigation affected plant height and tiller numbers that showed varietal differences. As salt tolerant rice cultivars, Daegwangbyeo, Namweonbyeo, Sinseonchalbyeo, Gyehwabyeo, and Daeyabyeo were selected. Jinbubyeo, Donghaebyeo, and Tamjinbyeo were weak in salty water irrigation.

• Journal of Hospice and Palliative Care
• /
• v.5 no.2
• /
• pp.125-135
• /
• 2002

Purpose : The purpose of this study was to investigate the impact of depression, discomfort, spirituality, physical care, and opioid use on pain with terminally ill cancer patients in the hospice units. Method : The convenient sample of this study consisted of 58 terminally ill cancer patients at three hospice units in university-affiliated hospitals. Patients were interviewed with structured questionnaires. The data was analyzed using ANOVA, Pearson correlation coefficient, and multivariate multiple regression. Result : The results of this study were as follows : 1) The mean age of the participants was approximately 57 years. Regarding diagnosis, stomach cancer showed the highest frequency (24.1%), followed by lung cancer (17.2%) and rectal cancer (13.8%). Regarding motivation for admission to the hospice unit, the majority of the participants indicated pain control (67.2%), followed by spiritual care (39.7%), and symptom relief (27.6%). 2) The mean pain level measured by VAS was 5.13 (${\pm}2.61$). Regarding pain type, the highest pain frequency the participants experienced was deep pain (53.4%), followed by multiple pain (20.7%), intestinal pain (17.3%), and neurogenic (5.2%) and superficial pain (3.4%). 3) Regarding the factors influencing pain, the pain level was significantly affected by the depression level (P<0.01) and the opioid use (P<0.01). Conclusion, In summary, the higher the level of pain the terminally ill cancer patents had the higher the depression level as well as the opioid use. Thus, health care professionals need to continuously provide holistic care for them to die comfortably.

• Korean Journal of Poultry Science
• /
• v.41 no.4
• /
• pp.249-259
• /
• 2014

Cryopreserving cells which are maintaining their viability are the very complex process. This study has been carried out in order to find the effects of cryopreservation steps and freezing media on the rates of viability of cryopreserved chicken primordial germ cells (PGCs). PGCs obtained from the germinal gonade of 5.5~6 day (stage 28) chick embryos of Korean Ogye (KO) and Commercial breeds (C), using the MACS method were suspended in a freezing medium containing a freezing and protecting agents (e.g. dimethyl sulfoxide (DMSO), ethylene glycol (EG) and propylene glycol (PG)). Gonads were harvested from stage 28 chick embryos and pooled in groups of 5, 10, 15, 20E embryos, contributing gonads to the cell suspension. The gonadal cells, including PGCs, were then frozen in 1 of the following cryoprotectant treatments : 2.5%, 5%, 10%, 15% and 0% cryoprotectant (DMSO, EG, PG) as a control. Effects of exposure to slow freezing and vitrification, with different concentrations of the cryoprotectant solution, were examined. After vitrification and slow freezing, survival rates of the frozen-thawed PGCs from the 10% EG plus FBS treatment were 85.63%, and 66.14% (p<0.05), respectively. The viability of PGCs after freeze-thawing was significantly higher for 10% EG plus FBS treatment than for 10% PG + FBS treatment (p<0.05) (85.63% vs 66.81%) by vitrification. This study established a method for preserving chicken PGCs that enables systematic storage and labeling of cryopreserved PGCs in liquid ($LN_2$) at a germplasm repository and ease of entry into a data base. In the future, the importance for this new technology is that poultry lines can be conserved while work is being conducted on improving the production of germline chimeras.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.212-228
• /
• 1993

A chenier, about 860 m long, 30 to 60 m wide and 0.6∼1.6 m high, occurs on the upper muddy tidal flat in the Gomso bay, western coast of Korea, It consists of medium to fine sands and shells with small amounts of subangular gravels. Vertical sections across the chenier show gently landward dipping stratifications which include small-scale cross-bedded sets. the most probable source of the chenier is considered to be the intertidal sandy sediments. Vibracores taken along a line transversing the tidal flat reveal that the intertidal sand deposits are more than 5 m thick near the low-water line and become thinner toward the chenier. The most sand deposits are undertrain by tidal muds which occur behind the chenier as salt marsh deposits. C-14 age dating suggests that the sand deposits and the chenier are younger than about 1,800 years B.P. The chenier has originated from the intertidal sand shoals at the lower to mid sand flat, and has continuously moved landward. A series of aerial photographs (1967∼1989) reveal that intertidal sand shoals (predecessor of the western part of chenier) on the mid flat have continuously moved landward during the past two decades and ultimately attached to the eastern part of the chenier already anchored at the present position in the late 1960s. Repeated measurements (four times between 1991 and 1992) of morphological changes of the chenier indicate that the eastern two thirds of the chenier, mostly above the mean high water, has rarely moved whereas the western remainder below the mean high water, has moved continuously at a rate of 0.5 m/mo during the last two years (1991∼1992). This displacement rate has been considerably accelerated up to 1.0 m/mo in winter, and during a few days of typhoon in the summer of 1992 the displacement amounted to about 8∼11 m/mo for the entire chenier. these facts suggest that macro-tidal currents, coupled with winter-storm waves and infrequent strong typhoons, should play a major role for the formation and migration of chenier after 1,800 B.P., when the sea level already rose to the present position and thereafter remained constant.

• Parasites, Hosts and Diseases
• /
• v.24 no.2
• /
• pp.187-193
• /
• 1986

Enzyme-linked immunosorbent assay(ELISA) using crude and affinity-purified antigens of adult worms of Paragonimus westermani was performed for infected cat sera with different worm burden, from preinfection to 18th week after infection. Crude antigen was used with supernatant of homogenated worms by freezing-thawing method, and the supernate was centrifuged for 1 hour at 10,000 rpm at $4^{\circ}C$. Affinity-purified antigen(antibody-bound antigen) was prepared from fractions(bound and unbound) of crude antigen by affinity chromatography on CNBr-activated sepharose 4B, and IgG as a ligand was prepared from paragonimiasis cat serum(6 months infected) obtained by ammonium sulfate ($40%{\sim}45%$ saturated) precipitation method. By SDS-PAGE, crude antigen showed 22 polypeptide fractions while purified antigen showed 4 fractions: 36, 400, 34, 700, 27, 600 and 11, 500 in molecular weights. All cats were divided into five groups($G_1-G_5$) by different worm burdens. The mean of recovered worms(${\pm}SD$) and the number of cats in each group are as follows: $G_1$, 2 worms(0) and 4 cats; $G_2$, 4.75 (${\pm}0.66$) and eight; $G_3$, 10.75(${\pm}1.92$) and four; $G_4$, 23.20(${\pm}3.43$) and five; $G_5$, 48(${\pm}12.63$) and five cats. The results were summarized as follows: 1. The antibody levels(OD value) increased by worm burden in $G_1$ to $G_4$ generally. However, individual antibody levels were not exactly related with worm burden in all groups, especially there was a wide difference in $G_4$ and $G_5$. These results suggested that the worm burden in $G_4$ (about $20{\sim}30$ worms) is enough to produce antibody maximum in cats of $2{\sim}3kg$ weight. 2. The antibody levels increased significantly(p<0.05) compared to control sera at the 3rd week in $G_1$ and $G_2$, at the 2nd week in $G_3$, and at the 1st week in $G_4$ and $G_5$. Especially in the 4th week, OD value increased more in $G_1$(p<0.01) and in $G_2$ to $G_5$(p<0.001). In the pattern of antibody levels by ELISA in each group, OD in $G_1$ increased to the 18th week continuously, in $G_2$ OD was maintained same after the 16th week, but in $G_3$ it decreased after the 16th week, and it was maintained same in $G_4$ and $G_5$ after the 14th week. 3. The antibody levels by ELISA with the affinity-purified antigen were higher than those with crude antigen in all groups generally. Especially, the difference of OD values between two antigens was larger from the 4th to the 10th week. In $G_1$ and $G_2$ OD with purified antigen was higher than that with crude one to the 18th week. It was also higher in $G_3$ than that with crude antigen to the 16th week and OD of $G_4$ and $G_5$ were higher before the 14th week than that with crude antigen, however became lower at the 16th week. Consequently, the antibody level in ELISA with affinity-purified antigen was more sensitive at the early weeks after infection and in light infection groups than that with crude antigen.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.51-54
• /
• 1970

External features of silkworms are not evident during stage of larvae and pupae like in the stage of imagines. In general, therefore, sexing of larvae has been depended on Herold's gland of males or Ishiwata' sexual spots (Anterior sexual spots and posterior sexual spots) of a female 2-3 days after of the 5th age since it is relatively easy to classify in this period. Sometimes. however, we made mistake of sexing since a pair of small spot around the abdomen of 9th abdominal of males and posterior sexual spot of females was found at the same position. This study has been conducted in order to obtain essential points of classifing the above it will be summarized as follows: A. Existence of the males small spots on 9th abdominal segment were varied by races. Through observation races by races the more larvae which had the small spots were found in chinese races than the Japanese, and 57 percent of the Chinese orgin larvae of the small spot were picked among total counted males. B. The small spots were more or less roundly shaped just as posterior sexual spots of females, and these spots were colored slightly even the colors were somewhat different by races. Milky color was seen in the case of the posterior sexual spots. The small spots were observed smaller than the posterior sexual spots. It is difficult classify the sexual spots during stage of mature larvae, but it was easily classified small spots by the naked eye even in the same stage. The small spots were found at the same site of the posterior sexual spots. C. After sexing by based on the small spots and Herold's gland, the sexing through purpae bodies were carried out again to confirm its correctness. Average 5. 2 percent of more opposite sex were found in the latter. This figures supposed to be caused the location of the small spots coincide with the posterior sexual spots. D. The moths, no disorder were found in daily activities and their generative functions depend on the existence of the small spot and thickness of its color. E. It is presumed that existence of the small spots were caused by races, heredity nature, voltinism, moulting, and etc.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.746-763
• /
• 1996

An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.845-855
• /
• 2013

Requirements of dietary chloride (dCl) and chloride salts were determined by using $4{\times}2$ factorial arrangement under four phase feeding program. Four levels (0.31, 0.45, 0.59 and 0.73%) and two sources ($NH_4Cl$ and $CaCl_2$) of the dCl were allocated to 1,472 chicks in eight dietary treatments in which each treatment was replicated four times with 46 birds per replicate. The four phase feeding program was comprised of four dietary phases: Prestarter (d 1 to 10), Starter (d 11 to 20), Grower (d 21 to 33) and Finisher (d 34 to 42); and diets were separately prepared for each phase. The cations, anions, pH, dissolved oxygen (DO), temperature, electrical conductivity (EC), total dissolved solids (TDS) and salinity were analyzed in drinking water and were not affected by dietary treatments. BW gain (BWG; $p{\leq}0.009$) and feed:gain (FG; $p{\leq}0.03$) were improved in $CaCl_2$ supplemented diets during d 1 to 10. The maximum response of BWG and FG was observed at 0.38% and 0.42% dCl, respectively, for d 34 to 42. However, the level of dCl for BWG during d 21 to 33 ($p{\leq}0.04$) and d 34 to 42 ($p{\leq}0.009$) was optimized at 0.60% and 0.42%, respectively. The level of dCl for optimized feed intake (FI; $p{\leq}0.006$), FG ($p{\leq}0.007$) and litter moisture (LM; $p{\leq}0.001$) was observed at 0.60%, 0.38% and 0.73%, respectively, for d 1 to 42. Water intake (DWI) was not affected by increasing dCl supplementation (p>0.05); however, the ratio between DWI and FI (DWI:FI) was found highest at 0.73% dCl during d 1 to 10 ($p{\leq}0.05$) and d 21 to 33 ($p{\leq}0.009$). Except for d 34 to 42 ($p{\leq}0.006$), the increasing level of dCl did not result in a significant difference in mortality during any phase. Blood pH and glucose, and breast and thigh weights (percentage of dressed weight) were improved while dressing percentage (DP) and gastrointestinal health were exacerbated with $NH_4Cl$ as compared to $CaCl_2$ supplemented diets ($p{\leq}0.001$). Higher plasma $Na^+$ and $HCO_3{^-}$ and lower $Cl^-$ and $Ca^{{+}{+}}$ were observed in $NH_4Cl$ supplemented diets ($p{\leq}0.001$). Increasing supplementation of dCl increased plasma $Cl^-$ ($p{\leq}0.04$; quadratically) and linearly reduced plasma $K^+$ ($p{\leq}0.001$), $Ca^{{+}{+}}$ ($p{\leq}0.003$), $HCO_3{^-}$ ($p{\leq}0.001$), and $Na^+$ ($p{\leq}0.001$; quadratically). Consequently, higher requirements of dietary chloride are suggested for feed intake; nevertheless, lower levels of dietary chloride are sufficient to support optimal BWG and FG with increasing age. The $NH_4Cl$ supplemented diets ameliorate breast and thigh meat yield along with overall energy balance (glucose).

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.179-193
• /
• 2009

As the common saying attests, a publish-or-perish world, publishing is absolutely critical for academic researchers' successful careers. It is the most objectively-accepted academic performance criteria and the most viable way to attain public and academic recognition. Asia Pacific Journal of Information Systems(APJIS) has been recognized as the most influential domestic journal in Korean MIS field since July, 1991. Therefore, publishing in APJIS means your research is original, valid, and contributive. While most researchers learn how to publish an article in APJIS through a repetitive review process, thereby improving their chance of the' accepted' through their personal trial and error experiences, such valuable lessons and know-how tend to be kept personally and rarely shared. However, useful insights into research and publication skills could be also gained from sharing others' errors, neglect, and misjudgments which are equally critical in improving researchers' knowledge in the field (Murthy and Wiggins, 2002). For this reason, other academic disciplines make systematic efforts to examine the paper review process of major journals and share the findings from these studies with the rest of the research community members (Beyer et al., 1995; Cummings et al, 1985; Daft, 1995; Jauch and Wall, 1989; Murthy and Wiggins, 2002). Recognizing the urgent need to provide such type of information to MIS research community in Korea, we have chosen the most influential academic journal, APJIS with an intention to share the answer to the following research question: "What are the common problems found in the manuscripts either 'rejected' or 'required a major revision' by APJIS reviewers?" This study analyzes the review results of manuscripts submitted to APJIS (from January, 2006 to October, 2008), particularly those that were 'rejected' or required a 'major revision' at the first round. Based on Daft's(1995) study, twelve most-likelihood problems were defined and used to analyze the reviews. The twelve criteria for classification, or "twelve problems", are as follows: No theory, Concepts and operationalization not in alignment, Insufficient definition--theory, Insufficient rationale--design, Macrostructure--organization and flow, Amateur style and tone, Inadequate research design, Not relevant to the field, Overengineering, Conclusions not in alignment, Cutting up the data, and Poor editorial practice. Upon the approval of the editorial board of APJIS, the total 252 reviews, including 11 cases of 2005 and 241 cases from July, 2006 to October, 2008, were received without any information about manuscripts, authors, or reviewers. Eleven cases of 2005 were used in the pilot test because the data of 2005 were not in complete enumeration, and the 241 reviews (113 cases of 'rejection' and 128 ones of 'major revision') of 2006, 2007, and 2008 were examined in this study. Our findings show that insufficient rationale-design(20.25%), no theory(18.45%), and insufficient definition--theory(15.69%) were the three leading reasons of 'rejection' and 'major revision.' Between these two results, the former followed the same order of three major reasons as an overall analysis (insufficient rationale-design, no theory, and insufficient definition-theory), but the latter followed the order of insufficient rationale--design, insufficient definition--theory, and no theory. Using Daft's three major skills-- 'theory skills', 'design skills', and 'communication skills'-- twelve criteria were reclassified into 'theory problems', 'design problems', and 'communication problems' to derive more practical implications of our findings. Our findings show that 'theory problems' occupied 43.48%, 'design problems' were 30.86%, and 'communication problems' were 25.86%. In general, the APJIS reviewers weigh each of these three problem areas almost equally. Comparing to other disciplines like management field shown in Daft's study, the portion of 'design problems' and 'communication problems' are much higher in manuscripts submitted to the APJIS than in those of Administrative Science Quarterly and Academy of Management Journal even though 'theory problems' are the most predominant in both disciplines.