• Title/Summary/Keyword: C solubility

Search Result 1,033, Processing Time 0.028 seconds

Soluble Characteristics of Deer Young Antler, Deer antler, Oystershell, Crabshell and Eggshell to Organic Acid (녹용.녹각.굴껍질.게껍질.달걀껍질의 유기산에 대한 용해 특성)

  • Ann, Yong-Geun
    • The Korean Journal of Food And Nutrition
    • /
    • v.23 no.1
    • /
    • pp.45-51
    • /
    • 2010
  • The 2%, 3% of deer young antler, deer antler, oystershell, crabshell, eggshell were add into the 5%, 10%, 15% solution of glacial acetic acid and vinegar and after incubating it for 4 days at $30^{\circ}C$ respectively, solubility was analyzed. The result shows the difference was minute between glacial acetic acid and vinegar. In the 2% content of deer young antler, solubility was 42~47%, in the 3% content of it, solubility was 41~47%, with the acid concentration becoming higher, solubility increased slightly. In the 2% content of deer antler, solubility was 59~63%, in the 15% content of acid, solubility rather decreased. In the 2% content of oystershell, solubility was 85~96%, in the 3% content, solubility was 95~98%, in the 15% of acid density, it decreased. In the 2% content of crabshell, solubility was 79~88%, in the 3% content, solubility was 81~95%, and in case that acid density was high, solubility increased rather slightly. In the 2% content of eggshell, solubility was 84~96%, in the 3% content, solubility was 84~93%. When young deer antler and deer antler were heated for two hours at $100^{\circ}C$, solubility increased 19~24%, and in the case of crabshell, 10~11% increased. The above result and condition, and the result of pH and acidity don't have much influence on solubility. Thus, the 5% of acidity was enough to melt the 3% of sample. Highest were glacial acetic acid and vinegar in solubility to the various organic acid, and wax gourd vinegar melted the 85% of oystershell, the 78% of crabshell, the 28% of the deer young antler, and in the precipitation was made. Citric acid melted the 57% of deer antler, but it was precipitated with all other samples. Ascorbic acid melted the 92% of eggshell, and did the 37~54% of other samples.

Solubility Study of Nickel Ferrite in Boric Acid Using a Flow-Through Autoclave System under High Temperature and High Pressure

  • Park, Yong Joon;Choi, Ke-Chon;Ha, Yeong-Keong
    • Nuclear Engineering and Technology
    • /
    • v.48 no.2
    • /
    • pp.554-558
    • /
    • 2016
  • The solubility of nickel ferrite in an aqueous solution of boric acid was studied by varying the pH at the temperatures ranging from $25^{\circ}C$ to $320^{\circ}C$. A flow-through autoclave system was specially designed and fabricated to measure the solubility of Fe in hydrothermal solutions under high temperature and pressure. The performance of this flow-through system was directly compared with the conventional static state technique using a batch-type autoclave system. The stability of fluid velocity for the flow-through autoclave system was verified prior to the solubility measurement. The influence of chemical additives, such as boric acid and $H_2$, on the solubility of nickel ferrite was also evaluated.

Synthesis and Characterization of Swallow-Tail Perylene Bisimide as Organic Phosphor for Hybrid LED (Hybrid LED용 유기 형광체로서의 Swallow-Tail Perylene Bisimide 제조 및 특성 연구)

  • Jung, Sung Bong;Jeong, Yeon Tae
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.32 no.1
    • /
    • pp.86-92
    • /
    • 2019
  • Although perylene bisimide derivatives have advantages such as excellent thermal stability and high luminance efficiency, they have poor solubility characteristics in organic solvents. In this research, in order to improve the solubility characteristics, we prepared perylene bisimide derivatives (1C) and (2C) with swallow-tail substituted imide, which is known to lead to excellent solubility. The structures and properties of swallow-tail perylene bisimide (1C) and (2C) were analyzed by $^1H-NMR$, FT-IR, UV/Vis spectroscopy, and thermogravimetric analysis (TGA). The maximum absorption wavelengths of (1C) and (2C) in the UV/Vis spectrum were 558 nm and 556 nm, respectively, and the maximum emission wavelengths were 602 nm and 600 nm, respectively. In the TGA, (1C) demonstrated good thermal stability with less than 5 wt% weight loss up to $242^{\circ}C$. In the solubility test, (1C) and (2C) exhibited solubilities of more than 5 wt% in chloroform, ethyl acetate, and dimethylformamide, but not in methanol. When the compounds (1C) and (2C) were mixed with PMMA (polymethyl methacrylate), thin films showed peaks at 679 nm and 677 nm, respectively, in the photoluminescence spectra. (1C) was found to be a possible candidate as red organic phosphor for hybrid LEDs.

Measurement of Toluene Solubility in PVAc Using a Quartz Crystal Microbalance (PVAc에서 Quartz Crystal Microbalance를 이용한 톨루엔의 용해도 측정에 관한 연구)

  • Kim, S.B.
    • Elastomers and Composites
    • /
    • v.43 no.3
    • /
    • pp.166-172
    • /
    • 2008
  • The resistance and frequency change of a quartz crystal microbalance during toluene absorption was measured for poly(vinyl acetate) (PVAc) with 268 nm thickness. Solubility of toluene in PVAc were measured at temperatures from 25$^{\circ}C$ to 42$^{\circ}C$ and pressures up to 28.4 torr. The frequency of a quartz crystal microbalance increased with increasing temperature and decreased with an increase in toluene vapor pressure. The resistance of a quartz crystal microbalance increased with increasing toluene vapor pressure and decreased with an increase in temperature. A greater pressure of toluene results in a greater solubility of the toluene into the PVAc film. The change of solubility was calculated by Sauerbrey equation.

Measurement of solubility and miscibility of R-134a/PAG oil mixture (R-134a/PAG 오일 혼합물의 용해도 및 상용성 측정)

  • 김창년;송준석;박영무
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.11 no.4
    • /
    • pp.518-527
    • /
    • 1999
  • The solubility and miscibility measurement apparatus has been developed and used to obtain data for refrigerant/oil mixture. The solubility and miscibility data for R-134a/46 ISO VG Polyalkylen Glycol(PAG) oil mixture are obtained over the temperature range from -20 to 6$0^{\circ}C$ with a 1$0^{\circ}C$ interval and the oil concentration range from 0 to 90wt%. Using the experimental data, an empirical model is developed to predict the solubility relations for R-134a/PAG oil mixture at equilibrium. The average root-mean-square deviation between measured data and calculated results from the empirical model is 4.2%. Raoult's rule and Flory-Noggins theory are also used to predict mixture behavior. Immiscibility is observed for R-134a/46 ISO VG PAG oil mixture at low oil concentrations of 4.6, 10.1, and 20.4wt%.

  • PDF

Thermodynamic Evaluation of Fe Effect on Alumina Solubility in Orthopyroxene coexisting with Garnet

  • Lee, Han-Yeang
    • Journal of the Korean earth science society
    • /
    • v.25 no.1
    • /
    • pp.39-47
    • /
    • 2004
  • In the FMAS system the effect of iron on alumina solubility in orthopyroxene has been determined by experiments with crystalline starting mixtures of garnet and orthopyroxene of known initial compositions at 20 kb, 975$^{\circ}C$ and 25 kb, 1,200$^{\circ}C$. These data have been modeled to develop a thermodynamic method for the calculation of Al$_{2}$O$_{3}$ in orthopyroxene as a function of P, T and composition. The direct application of the alumina solubility data in the MAS system to natural assemblages could lead to significant overestimation of pressure, probably by about 5kb for the relatively common garnet-lherzolites with abot 25 mol per cent Ca + Fe$^{2+}$ in garnet and about 1 wt. per cent Al$_{2}$O$_{3}$ in orthopyroxene since the effect of Fe is similar to that of Ca and Cr$^{3+}$in reducing the alumina solubility in orthopyroxene in equilibrum with garnet relative to that in the MAS system.

The Solubility of Calcium Silicate Hydrates (규산석탄수화물의 용해도에 관한 연구)

  • 이경희
    • Journal of the Korean Ceramic Society
    • /
    • v.15 no.1
    • /
    • pp.16-20
    • /
    • 1978
  • The solubility of tobermorite was measured, and it was compaired with the resultswhich calculated by thermodynamic data. As the result, 1) The type of silisic acid species in liquid phase were the both type of $H_3SiO_4$-, $H_4SiO_4$. 2) The solubility product of tobermorite represented the maximum value at 18$0^{\circ}C$.

  • PDF

In vitro Solubility of Copper(II) Sulfate and Dicopper Chloride Trihydroxide for Pigs

  • Park, C.S.;Kim, B.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.29 no.11
    • /
    • pp.1608-1615
    • /
    • 2016
  • This study was conducted to determine the solubility of copper (Cu) in two sources of copper(II) sulfate ($CuSO_4$) including monohydrate and pentahydrate and three sources of dicopper chloride trihydroxide (dCCTH) including ${\alpha}$-form (dCCTH-${\alpha}$), ${\beta}$-form (dCCTH-${\beta}$), and a mixture of ${\alpha}$- and ${\beta}$-form (dCCTH-${\alpha}{\beta}$) at different pH and a 3-step in vitro digestion assay for pigs. In Exp. 1, Cu sources were incubated in water-based buffers at pH 2.0, 3.0, 4.8, and 6.8 for 4 h using a shaking incubator at $39^{\circ}C$. The $CuSO_4$ sources were completely dissolved within 15 min except at pH 6.8. The solubility of Cu in dCCTH-${\alpha}$ was greater (p<0.05) than dCCTH-${\beta}$ but was not different from dCCTH-${\alpha}{\beta}$ during 3-h incubation at pH 2.0 and during 2-h incubation at pH 3.0. At pH 4.8, there were no significant differences in solubility of Cu in dCCTH sources. Copper in dCCTH sources were non-soluble at pH 6.8. In Exp. 2, the solubility of Cu was determined during the 3-step in vitro digestion assay for pigs. All sources of Cu were completely dissolved in step 1 which simulated digestion in the stomach. In Exp. 3, the solubility of Cu in experimental diets including a control diet and diets containing 250 mg/kg of additional Cu from five Cu sources was determined during the in vitro digestion assay. The solubility of Cu in diets containing additional Cu sources were greater (p<0.05) than the control diet in step 1. In conclusion, the solubility of Cu was influenced by pH of digesta but was not different among sources based on the in vitro digestion assay.

The Effect of the Ceramic Precipitates on the Hydrogen Solubility in Pd Alloys

  • Koh, Je Mann;Lee, Kil Hong;Baek, Seung Nam;Noh, Hak
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.10 no.2
    • /
    • pp.101-106
    • /
    • 1999
  • Hydrogen solubility in internally oxidized Pd-Mo(Al) alloys has been studied at 323 K from the measurements of pressure-composition(p-c) isotherms. Internal oxidation of $Pd_{0.985}Al_{0.015}$ and $Pd_{0.97}Mo_{0.03}$ alloys results in the precipitation of Al and Mo particles in a matrix of pure Pd. It has been observed that the presence of the aluminum and molybdenum oxide precipitates results in an enhanced hydrogen solubility in the dilute phase region of Pd-H in a Pd/aluminum(molybdenum)oxide composites. Hydrogen solubility enhancements due to the presence of residual stresses around ceramic particles have been observed from p-c isotherms determined at 323 K after oxidation at 1073 K. The solubility enhancements in completely internally oxidized alloys are greater than that in partially oxidized alloys. The stress fields near the ceramic precipitates are the major source of the solubility enhancements. Transmission electron microscopy indicates that alumina precipitates are nanometer-sized and coherent with the Pd matrix after oxidation.

  • PDF

Solubilization of Biphenyl Dimethyl Dicarboxylate in Aqueous Solution (수용액중의 비페닐디메칠디카르복실레이트의 가용화)

  • Bae, Joon-Ho;Park, Eun-Seok;Chi, Sang-Cheol
    • Journal of Pharmaceutical Investigation
    • /
    • v.27 no.3
    • /
    • pp.199-205
    • /
    • 1997
  • In order to formulate biphenyl dimethyl dicarboxylate(DDB) aqueous solutions, the effects of various solubilizing agents such as cosolvents(PG, PEG 400, glycerin, ethanol), surfactants,$(poloxamer\;407,\;Cremophor^{\circledR}\; RH40,\;Solutol^{\circledR},\;Tween\;80,\;sodium\;lauryl\;sulfate)$, complexation agent$(CELDEX^{\circledR}\;CH-20)$ and others(urea, niacinamide, propylene carbonate, HPMC) on the solubility of DDB in water were evaluated. The solubility of DDB in water was about $0.21\;{\mu}g/ml\;at\;20^{\circ}C$, while its solubility in PEG 400 was 5,000 times higher than that in water. 60% PEG 400 aqueous solution was selected as an optimum solvent system, and surfactants or other solubilizing agents were added to prevent DDB from recrystalization. The addition of surfactants in water increased the solubility of DDB from 15- to 34-fold, however, $CELDEX^{\circledR}\;CH-20$ and other agents studied showed negligible effects on the solubility of DDB in water. The 60% PEG 400 aqueous solution containing 5% $Cremophor^{\circledR}$ RH40 was appeared as the formula of choice. It showed acceptable physical stability after stored for 7 days at $4^{\circ}C$.

  • PDF