• Korean Journal of Microbiology
• /
• v.28 no.1
• /
• pp.19-26
• /
• 1990

To examine the effects of sequence variations near the transcriptional start site on the rate of formation of the open complexes at bacteriophage $\lambda P_{R}$ promoter, two mutant promoters were created by site-specific mutagenesis using synthetic oligonucleotides. Mutant I coatains changes at positions -3 and -4 from TT to CC, thus having a 6-bp long G/C stretch between -10 region and transciptional start site (+1). Mutant II has changes at positions -5 and -6 from GG to AA, thereby having a 9-bp long A/T stretch between positions -11 and -3. Selective filter binding assays were performed to measure the rate of formation of the open complexes between the wild-type or two mutant $P_{R}$ promoters on 664 bp fragments and E. coli RNA polymerase at two temperatures. At 37.deg.C, the wild-type and two mutants showed similar rates for the formation of open complex. The second order rate constant $k_{a}$ and $\tau _{int}$, as determined from the .tau.-plot analysis, were $(6.0\pm0.4)\times10^{6}M^{-1}sec^{-1}$ and $11\pm5$sec, respectively. At 18.deg.C, however, the wild-type and two mutant promoters showed differences in the kinetic parameters. k for the wild-type promoter was (2.2$\pm$0.1)\times 10^{6}M^{-1}sec^{-1}$ and $\tau _{int}$ was 76$\pm$sec. Mutant I and II exhibited differences mainly in the rate of isomerization ($\tau_{int,I}=91\pm$10 sec, int,II=34$\pm$ sec), whereas the second order rate constant $k_{a}$ was similar to the wild type value. This result implies that at $18^{\circ}C$, the isomerization rate is determined by both protein conformational change and DNA melting, which are separable kinetically according to the 3-step mechanism of Roe et al.(1984,1985), and that the base changes affected mainly the rate of DNA melting as predicted.lting as predicted.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.4
• /
• pp.231-235
• /
• 2014

This study performed a benefit cost analysis of an automatic eggshell crack detection system. Based on various cost benefit analysis methods, including the net present value (NPV), internal rate of return (IRR), and benefit cost ratio (B/C Ratio), the automatic eggshell crack detection system was confirmed to have economic validity. The NPVs were 175,035,645 won at a 5% discount rate and 129,082,393 won at a 10% discount rate. Plus, the IRRs were 0.686 at a 5% discount rate and 0.660 at a 10% discount rate. Finally, the B/C ratios were 1.981 at a 5% discount rate and 1.900 at a 10% discount rate.

• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.349-357
• /
• 1995

Purpose : To analyze survival rate and late rectal and bladder complication for patients with stage I and II carcinoma of uterine cervix treated by radiation alone or combined with chemotherapy Materials and Methods : Between November 1984 and December 1993, 127 patients with stage I and II carcinoma of uterine cervix treated by radiation alone or combined therapy of radiation and chemotherapy. Retrospective analysis for survival rate was carried out on eligible 107 patients and review for complication was possible in 91 patients. The median follow-up was 47 months (range 3-118) and the median age of patiens was 56 years (range 31-76). 26 patients were stage IB by FIGO classification, 40 were stage IIA and 41 were stage IIB. 86 cases were treated by radiation alone and 21 were treated by radiation and chemotherapy. 101 patients were treated with intracavitary radiation therapy (ICRT), of these, 80 were received low dose rate (LDR) ICRT and 21 were received high dose rate (HDR) ICRT. Of the patients who received LDR ICRT, 63 were treated by 1 intracavitary insertion and 17 were underwent 2 insertions And we evaluated the external radiation dose and midline shield. Results : Actuarial survival rate at 5 years was $92{\%}$ for stage IB, $75{\%}$ for stage IIA, $53{\%}$ for stage IIB and $69{\%}$ in all patients Grade 1 rectal complications were developed in 20 cases ($22{\%}$), grade 2 were in 22 cases ($24{\%}$). 22 cases ($24{\%}$) of grade 1 urinary complications and 17 cases ($19{\%}$) of grade 2 urinary complications were observed But no patient had severe complications that needed surgical management or admission care. Maximum bladder dose for the group of patients with urinary complications was higher than that for the patients without urinary complications (7608 cGy v 6960cGy. p<0.01) Maximum rectal dose for the group of patients with rectal complications was higher than that for the patients without rectal complications (7041cGy v 6269cGy, p<0.01). While there was no significant difference for survival rate or bladder complication incidence as a function of dose to whole pelvis, Grade 2 rectal complication incidence was significantly lower for the patients receiving less than 4500cGy ($6.3{\%}$ v $25.5{\%}$, p<0.05). There was no significant differance between HDR ICRT group and LDR ICRT group for survival rate according to stage, on the other hand complication incidence was higher in the HDR group than LDR group, This was maybe due to different prescription doses between HDR group and LDR group. Midline shield neither improved survival rate nor decreased complication rate. The number of insertion in LDR ICRT group did not affect on survival and compication rate. Conclusion : In stage I and II carcinoma of uterine cervix there was no significant differance for 5 year survival rate by radiation therapy technique. Rectal complication incidence was as a function of dose to whole pelvis and there were positive correlations of maximum dose of rectum and bladder and each complication incidence. So we recommand whole pelvis dose less than 4500cGy and maximum dose of rectum and bladder as low as possible.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.104-108
• /
• 2001

Naphthalene derived mesophase pitch WP) was spun into short fibers by using melt-blown technology. The pitch fibers oxidative stabilization were carried out heating rates of $2^{\circ}C/min,\;5^{\circ}C/min\;and\; 10^{\circ}/min$. The heating rate was a key factor to maximate the capacity of the Li-ion secondary battery through controlling the morphology of the graphitized fiber. The diameters of the melt-blown fibers prepared were in the range of $4{\mu}m\~16{\mu}m$ with functions of air jet speed, air temperature and the temperature of the nozzle. The graphitized fibers of $10{\mu}m$ diameters showed various morphological structure with heating rate of the stabilization. Radial, radial-random and skin-core cross-sectional structure of the fibers were observed at the respective heating rate of $2^{\circ}C/min\;5^{\circ}C/min\;and\;10^{\circ}C/min$. Most crystalline structure of graphite was obtained from the fiber stabilized at heating rate of $10^{\circ}C/min$ exhibiting the best anode performance with 400 mAh/g of capacitance and $96.8\%$ of charge/discharge efficiency.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.678-681
• /
• 1999

The objective of this study was to evaluate the effect of different heating rates on the thermal properties of pork loin muscle by DSC. Pork loin muscle was subjected to programmed heating at the following heating rate: 5, 10, 20, 30 and $40^{\circ}C/min$. Peaks were progressively shifted to right side as the heating rate was increased. $T_0$ was $50.39^{\circ}C$ at $5^{\circ}C/min$ and it was increased to $57.45^{\circ}C$ at $40^{\circ}C/min$ (p<0.05). Total enthalpy was 3.52 J/g at $5^{\circ}C/min$ and total enthalpy was increased to 3.60, 4.14, 4.54 and 4.61 J/g by degrees at heating rate 10, 20, 30 and $40^{\circ}C/min$ respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.69-76
• /
• 2013

Specific growth rate and removal rate of nitrogen and phosphorus of Chlorella sorokiniana, Chlorella vulgaris, Senedesmus dimorphus those are able to metabolite mixotrophically and have high nitrogen and phosphorus removal capacity were examined. Based on the results, one microalgae was selected and conducted experiments to identify the operating factors such as pH and aeration rate. The specific growth rate and phosphorus removal rate of C. sorokiniana significantly presented as $0.29day^{-1}$ and 1.65 mg-P/L/day, while the nitrogen removal rate was high as 12.7 mg-N/L with C. vulgaris. C. sorokiniana was chosen for appropriate microalgae to applying for wastewater treatment system and was cultured in pH ranged 3 to 11. High specific growth rate and removal rate of nitrogen and phosphorus were shown at pH 7 as $0.71day^{-1}$, 7.61 mg-N/L/day, and 1.24 mg-P/L/day, respectively. The specific growth rate examined with aeration rate between 0 and 2 vvm (vol/vol-min) highly presented as $1.2day^{-1}$ with 1.5 ~ 2 vvm, while the nitrogen removal rate was elevated with 0.5 vvm as 9.43 mg-N/L/day.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.96-100
• /
• 2009

One of the major drawbacks associated with the high-level expression of the recombinant proteins in Escherichia coli is the formation of insoluble inclusion bodies in the cytoplasm. Production of recombinant protein at reduced temperature has proven effective in improving the solubility of a number of structurally and functionally unrelated proteins, but a major limitation of using low temperatures for recombinant protein production in E. coli is the reduced rate of synthesis of the heterologous protein caused by the significant reduction of cell growth rate. Here we investigated the effect of co-expression of CspA, a cold-shock protein known to be RNA chaperone at low temperature, on the productivity of recombinant protein at various temperatures by using green fluorescence protein (GFP) as a model recombinant protein. We could observe that the co-expression of CspA enhanced the productivity of GFP at $15^{\circ}C$ by accelerating the growth of E. coli at the temperature. On the other hand, the CspA coexpression didn't affect the cell growth rate as well as the specific GFP production rate at other tested temperatures, $20^{\circ}C$, $25^{\circ}C$, and $37^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.43 no.4
• /
• pp.509-512
• /
• 2011

To study the effect of freezing rate on the quality of freeze-dried rice porridge, freeze-dried rice porridge products were prepared with rice porridge pre-frozen at three different temperatures of -20, -40, and -70$^{\circ}C$. The porridge properties such as microstructure, mechanical properties, textural properties, and rehydration rate were determined. Scanning electron microscopy images indicated that fewer air cells were obtained with a larger size of freeze-dried rice porridge frozen at -20$^{\circ}C$ compared with that frozen at -40 and -70$^{\circ}C$. In contrast, quick frozen products at -70$^{\circ}C$ had more dense texture with higher mechanical strength, whereas slow frozen products exhibited higher rehydration rates than those of quick frozen products. In conclusion, the proper choice of pre-freezing temperature plays a decisive role when preparing freeze-dried rice porridge with optimum quality and convenience.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.135-140
• /
• 1975

Among many honeys, the buckwheat honey was the best one using for Yackwa(a Korean cookie). We made a substitute, similary syrups of buckwheat honey, and then we got the following conclusions through the case of the similar syrups. 1. The best syrups are A, B and C syrup. A syrup's composition rate was sugar (40%), corn-syrup (20%) and water (40%) before boiling for 10 minutes. B syrup's composition rate was water (40%), glucose (20%), corn-syrup (20%) and sugar (20%) before boiling for 15 minutes. C syrup's composition rate like B syrup's but boiled for 10 minutes. 2. The best syrups used for dough are A and B syrup. C syrup was good for soaking. When A syrup used for dough, we have to immediate soaking in A syrup after frying or soaking in C syrup an hour later after frying. When B syrup used for dough, we must soaking in C syrup an hour later after frying. 3. The rate of fat in the composition of buckwheat honey's, A syrup's and B syrup's Yackwa was 27.22%, 23.05%, 23.05% and 30.35%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.5
• /
• pp.447-454
• /
• 2009

Rate-independent crystal plasticity model suffers from the non-uniqueness of activated slip systems and the determination of the shear slip rates on the active slip systems. In this paper, a time-integration algorithm which circumvents the problem of the multiplicity of the slip systems was developed and implemented into the user subroutine VUMAT of a commercial finite element program ABAQUS. The magnitude of the slip shears on the active slip systems in f.c.c Cu single crystal aligned with the specific crystallographic orientation was investigated to validate our solution procedure. Also, texture developments under various deformation modes such as simple compression, simple tension and plane strain compression were compared with the results of the rate-dependent model by using the rate-independent crystal plasticity model. The computation time employing the rate-independent model is much more reduced than the those of the rate-dependent model.